---
title: "Oscillation Actuator"
industry: "Basic Metal Manufacturing"
verification_protocol:
  urn: "URN:CNFX:ME:OSCILLATION_ACTUATOR"
  data_integrity_hash: "9d8dd1d8f0917911a32c1cfc1216b7a1"
  source_authority: "https://cnfx.com"
  strict_mode: true
source_identity:
  provider: "CNFX Industrial Knowledge Graph"
  index_version: "2026.Q1-Universal"
  authority_id: "URN:CNFX:ME:OSCILLATION_ACTUATOR"
  data_source_uri: "https://cnfx.com/llms/industry/basic-metal-manufacturing/product/oscillation-actuator.md"
  official_resource_url: "https://cnfx.com/industry/basic-metal-manufacturing/product/oscillation-actuator"
  is_verified_logic: true
attributes:
  spec:
    status: "config-dependent"
    typical_range: "0.5-3.0 mm stroke amplitude at 50-300 cycles/min frequency, 150-250 bar hydraulic pressure"
    unit: "mm"
engineering_limits:
  max_safe_operating_point:
    value: 280
    unit: "bar"
    consequence: "Cavitation at hydraulic pump suction due to NPSH &lt; 2.5 m, thermal fatigue from cyclic stress exceeding 350 MPa at 200°C operating temperature"
fmea_matrix_quantitative:
  - node_1:
      trigger: "Hydraulic fluid contamination exceeding ISO 4406 18/16/13 cleanliness level"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Install dual 3 μm absolute filtration with pressure differential monitoring at 0.5 bar threshold"
  - node_2:
      trigger: "Bearing lubrication failure with oil film thickness &lt; 1 μm"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Forced lubrication system with 0.15 MPa minimum pressure and 40°C temperature control"
bom_nodes:
  piston-rodcylinder:
    type: "part"
    urn: "URN:CNFX:ME:PISTON_RODCYLINDER"
    interface_type: "physical-logic-coupled"
  seals-and-bearings:
    type: "component"
    urn: "URN:CNFX:ME:SEALS_AND_BEARINGS"
    interface_type: "physical-logic-coupled"
  mounting-flangebracket:
    type: "component"
    urn: "URN:CNFX:ME:MOUNTING_FLANGEBRACKET"
    interface_type: "physical-logic-coupled"
manufacturing_compliance:
  - standard: "ISO 1940-1:2003 (MECHANICAL VIBRATION - BALANCE QUALITY REQUIREMENTS FOR ROTORS IN A CONSTANT (RIGID) STATE)"
    scope: "Verified Engineering Specification"
  - standard: "ANSI/ASME B46.1-2019 (SURFACE TEXTURE, SURFACE ROUGHNESS, WAVINESS, AND LAY)"
    scope: "Verified Engineering Specification"
  - standard: "DIN EN 60034-1:2018 (ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE)"
    scope: "Verified Engineering Specification"
url: "https://cnfx.com/llms/industry/basic-metal-manufacturing/product/oscillation-actuator.md"
on_chain_sovereignty:
  contract_standard: "ERC-721-Industrial"
  metadata_hash: "9fe408b0c82f6458020112d59fb16e467f41ec994ad8b9f8c1fecb3162241383"
  royalty_logic: "IPFS-CID-REQUIRED"
  mint_status: "logic-verified-ready"
version: "3.3.4-EXTREME-SOVEREIGN-WEB3"
---

# Industrial Specification: Oscillation Actuator

## 1. Technical Definition
A mechanical or hydraulic device that generates controlled oscillatory motion for the continuous casting mold oscillation table.

## 2. Engineering Reasoning & Causal Matrix
> **Operational Intelligence**: Designed for **0.5-3.0 mm stroke amplitude at 50-300 cycles/min frequency, 150-250 bar hydraulic pressure**. Failure boundary: **Hydraulic pressure exceeding 280 bar causes seal extrusion, stroke amplitude beyond 3.5 mm induces bearing fatigue fracture**, Mechanism: **Cavitation at hydraulic pump suction due to NPSH &lt; 2.5 m, thermal fatigue from cyclic stress exceeding 350 MPa at 200°C operating temperature**.

### 2.1 Analytical Physics Model
Governed by the **Harmonic Vibration Force Generation**:

> **Primary Equation**: $F_e = m \cdot r \cdot \omega^2 \sin(\omega t)$  
> **Engineering Impact**: Calculates centrifugal force for vibratory sifters/feeders.

| Symbol | Variable Definition | Localized Reference |
| :--- | :--- | :--- |
| m | Eccentric Mass | Engineering Constant |
| r | Radius | Engineering Constant |
| \omega | Angular Frequency | Engineering Constant |

### 2.2 FMEA (Failure Mode & Effects Analysis)
| Event Trigger | Severity | Failure Mode | Mitigation Strategy |
| :--- | :--- | :--- | :--- |
| Hydraulic fluid contamination exceeding ISO 4406 18/16/13 cleanliness level | 8 | Servo valve spool sticking causing oscillation amplitude deviation &gt; ±0.1 mm | Install dual 3 μm absolute filtration with pressure differential monitoring at 0.5 bar threshold |
| Bearing lubrication failure with oil film thickness &lt; 1 μm | 8 | Rolling contact fatigue initiating subsurface cracks at 10⁷ cycles | Forced lubrication system with 0.15 MPa minimum pressure and 40°C temperature control |

## 3. Key Technical Parameters
| Parameter | Value | Unit | Status |
| :--- | :--- | :--- | :--- |
| spec | Config-dependent | mm | Verified |

## 4. System BOM & Knowledge Routing
### Core Components (Recursive Links)
- [Piston Rod/Cylinder](https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/piston-rodcylinder.md) `(Standalone System)`

### Industrial DNA Context (De-duplicated)
**Complementary Dependencies**: **Hydraulic Power Unit**, **Programmable Logic Controller System**, **Cooling Water Circulation System**  
**Downstream Applications**: Steel Slabs, Steel Blooms, Steel Billets  

## 5. Engineering Risks & FAQ
- **Caution**: 
- **Caution**: 
- **Caution**: 

### Q: What materials are used in this oscillation actuator for durability?
**A**: This oscillation actuator is constructed from alloy steel and high-strength cast iron, providing exceptional strength and wear resistance for demanding continuous casting applications in metal manufacturing.

### Q: How does this actuator improve continuous casting mold oscillation?
**A**: It generates precise controlled oscillatory motion for mold oscillation tables, ensuring smooth metal solidification and reducing defects in the continuous casting process for basic metal production.

### Q: What components are included in the Bill of Materials (BOM)?
**A**: The BOM includes mounting flange/bracket for secure installation, piston rod/cylinder for motion generation, and high-quality seals and bearings to ensure reliable operation and minimal maintenance.

## 6. Manufacturing Compliance
- ISO 1940-1:2003 (MECHANICAL VIBRATION - BALANCE QUALITY REQUIREMENTS FOR ROTORS IN A CONSTANT (RIGID) STATE)
- ANSI/ASME B46.1-2019 (SURFACE TEXTURE, SURFACE ROUGHNESS, WAVINESS, AND LAY)
- DIN EN 60034-1:2018 (ROTATING ELECTRICAL MACHINES - PART 1: RATING AND PERFORMANCE)

---
### 🛠️ Engineering Resource Access
🔗 **[Full Specification: Oscillation Actuator](https://cnfx.com/industry/basic-metal-manufacturing/product/oscillation-actuator)**

### 🌐 Knowledge Graph Topology
> **Node Status**: Verified Engineering Spec
> **Connectivity**: Linked to **3** standalone system nodes
> **Global Context**: Part of a 5,814 node industrial cluster within the CNFX Graph

> **Reference ID**: OSCILLATION_ACTUATOR | **Authority**: CNFX-2026-ST-001 | **Fingerprint**: 516b7459
