---
title: "Bottle Holding Fixtures"
industry: "Beverage Manufacturing"
verification_protocol:
  urn: "URN:CNFX:ME:BOTTLE_HOLDING_FIXTURES"
  data_integrity_hash: "193af2dfc89bc4064085d0ee88121710"
  source_authority: "https://cnfx.com"
  strict_mode: true
source_identity:
  provider: "CNFX Industrial Knowledge Graph"
  index_version: "2026.Q1-Universal"
  authority_id: "URN:CNFX:ME:BOTTLE_HOLDING_FIXTURES"
  data_source_uri: "https://cnfx.com/llms/industry/beverage-manufacturing/product/bottle-holding-fixtures.md"
  official_resource_url: "https://cnfx.com/industry/beverage-manufacturing/product/bottle-holding-fixtures"
  is_verified_logic: true
attributes:
  spec:
    status: "config-dependent"
    typical_range: "0.5-2.5 NÂ·m clamping torque, 50-150 mm adjustable grip diameter, -20Â°C to 80Â°C operating temperature"
    unit: "mm"
engineering_limits:
  max_safe_operating_point:
    value: 0.3
    unit: "NÂ"
    consequence: "Plastic deformation of spring steel components at 450 MPa yield strength; wear-induced clearance exceeding 0.1 mm tolerance; thermal expansion mismatch between aluminum (23.1Ã—10â»â¶/Â°C) and stainless steel (17.3Ã—10â»â¶/Â°C) components"
fmea_matrix_quantitative:
  - node_1:
      trigger: "Cyclic loading at 1200 cycles/hour exceeding 10â· fatigue cycles"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Shot peening surface treatment to induce compressive residual stresses of -300 MPa"
  - node_2:
      trigger: "Abrasive contamination (silica particles &gt;50 Î¼m) in lubrication film"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Magnetic filtration system removing ferrous particles &gt;5 Î¼m from recirculating oil"
bom_nodes:
  clamping-mechanism:
    type: "part"
    urn: "URN:CNFX:ME:CLAMPING_MECHANISM"
    interface_type: "physical-logic-coupled"
  base-plate:
    type: "component"
    urn: "URN:CNFX:ME:BASE_PLATE"
    interface_type: "physical-logic-coupled"
  bottle-contact-pads:
    type: "component"
    urn: "URN:CNFX:ME:BOTTLE_CONTACT_PADS"
    interface_type: "physical-logic-coupled"
manufacturing_compliance:
  - standard: "ISO 9001:2015 - QUALITY MANAGEMENT SYSTEMS"
    scope: "Verified Engineering Specification"
url: "https://cnfx.com/llms/industry/beverage-manufacturing/product/bottle-holding-fixtures.md"
on_chain_sovereignty:
  contract_standard: "ERC-721-Industrial"
  metadata_hash: "43061fb0858606f2f2337f50d393190b45740f4206b01a9d62cd0437ec22ed9e"
  royalty_logic: "IPFS-CID-REQUIRED"
  mint_status: "logic-verified-ready"
version: "3.3.4-EXTREME-SOVEREIGN-WEB3"
---

# Industrial Specification: Bottle Holding Fixtures

## 1. Technical Definition
Specialized fixtures designed to securely hold bottles in position during processing on a rotary carousel system.

## 2. Engineering Reasoning & Causal Matrix
> **Operational Intelligence**: Designed for **0.5-2.5 NÂ·m clamping torque, 50-150 mm adjustable grip diameter, -20Â°C to 80Â°C operating temperature**. Failure boundary: **Clamping force below 0.3 NÂ·m causes bottle slippage; above 3.0 NÂ·m causes plastic bottle deformation; temperature beyond -30Â°C or 100Â°C causes material embrittlement or softening**, Mechanism: **Plastic deformation of spring steel components at 450 MPa yield strength; wear-induced clearance exceeding 0.1 mm tolerance; thermal expansion mismatch between aluminum (23.1Ã—10â»â¶/Â°C) and stainless steel (17.3Ã—10â»â¶/Â°C) components**.

### 2.2 FMEA (Failure Mode & Effects Analysis)
| Event Trigger | Severity | Failure Mode | Mitigation Strategy |
| :--- | :--- | :--- | :--- |
| Cyclic loading at 1200 cycles/hour exceeding 10â· fatigue cycles | 8 | Spring steel fatigue fracture at stress concentration points | Shot peening surface treatment to induce compressive residual stresses of -300 MPa |
| Abrasive contamination (silica particles &gt;50 Î¼m) in lubrication film | 8 | Three-body wear increasing clearance beyond 0.15 mm tolerance | Magnetic filtration system removing ferrous particles &gt;5 Î¼m from recirculating oil |

## 3. Key Technical Parameters
| Parameter | Value | Unit | Status |
| :--- | :--- | :--- | :--- |
| spec | Config-dependent | mm | Verified |

## 4. System BOM & Knowledge Routing
### Core Components (Recursive Links)
- [Clamping Mechanism](https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/clamping-mechanism.md) `(Standalone System)`

### Industrial DNA Context (De-duplicated)
**Complementary Dependencies**: **Rotary Carousel System**, **Bottle Filling Machine**, **Bottle Capping Machine**  
**Downstream Applications**: Filled Beverage Bottles, Capped Beverage Bottles, Labeled Beverage Bottles  

## 5. Engineering Risks & FAQ
- **Caution**: 
- **Caution**: 
- **Caution**: 

### Q: What materials are used in these bottle holding fixtures?
**A**: Our fixtures are constructed from durable stainless steel and food-grade plastic components, ensuring compliance with beverage manufacturing safety standards.

### Q: How do these fixtures secure bottles on rotary carousels?
**A**: The clamping mechanism with adjustable bottle contact pads securely holds bottles in position during high-speed processing, preventing movement or tipping.

### Q: Are these fixtures compatible with existing beverage processing equipment?
**A**: Yes, our bottle holding fixtures are designed to integrate seamlessly with standard rotary carousel systems and can be customized to match specific production line requirements.

## 6. Manufacturing Compliance
- ISO 9001:2015 - QUALITY MANAGEMENT SYSTEMS

---
### ðŸ› ï¸ Engineering Resource Access
ðŸ”— **[Full Specification: Bottle Holding Fixtures](https://cnfx.com/industry/beverage-manufacturing/product/bottle-holding-fixtures)**

### ðŸŒ Knowledge Graph Topology
> **Node Status**: Verified Engineering Spec
> **Connectivity**: Linked to **3** standalone system nodes
> **Global Context**: Part of a 5,814 node industrial cluster within the CNFX Graph

> **Reference ID**: BOTTLE_HOLDING_FIXTURES | **Authority**: CNFX-2026-ST-001 | **Fingerprint**: fd506f95
