---
title: "CIP Cleaning Module"
industry: "Beverage Manufacturing"
verification_protocol:
  urn: "URN:CNFX:ME:CIP_CLEANING_MODULE"
  data_integrity_hash: "782d450a6158fb9032f95d838b1ec3d6"
  source_authority: "https://cnfx.com"
  strict_mode: true
source_identity:
  provider: "CNFX Industrial Knowledge Graph"
  index_version: "2026.Q1-Universal"
  authority_id: "URN:CNFX:ME:CIP_CLEANING_MODULE"
  data_source_uri: "https://cnfx.com/llms/industry/beverage-manufacturing/product/cip-cleaning-module.md"
  official_resource_url: "https://cnfx.com/industry/beverage-manufacturing/product/cip-cleaning-module"
  is_verified_logic: true
attributes:
  spec:
    status: "config-dependent"
    typical_range: "2.5-6.0 bar (36-87 psi) at 75-85°C with 1.5-3.0% caustic solution concentration"
    unit: "L/min"
engineering_limits:
  max_safe_operating_point:
    value: 8.3
    unit: "bar"
    consequence: "Caustic-induced stress corrosion cracking (SCC) in 316L stainless steel at chloride concentrations &gt;25 ppm above 80°C; thermal expansion mismatch between PTFE seals (CTE 135×10⁻⁶/K) and 316L stainless steel (CTE 16×10⁻⁶/K) at ΔT&gt;40°C"
fmea_matrix_quantitative:
  - node_1:
      trigger: "CIP solution temperature controller PID windup causing overshoot to 95°C"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Dual redundant RTD sensors with 0.1°C resolution and independent safety PLC implementing IEC 61508 SIL-2 rated thermal shutdown at 88°C"
  - node_2:
      trigger: "Caustic solution concentration sensor drift (Mempros MP-103) reading 1.8% actual 3.5%"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Coriolis mass flow meter (Krohne Optimass 7400) with 0.05% concentration accuracy and automated daily calibration against reference conductivity cell"
bom_nodes:
  solution-tank:
    type: "part"
    urn: "URN:CNFX:ME:SOLUTION_TANK"
    interface_type: "physical-logic-coupled"
  centrifugal-pump:
    type: "part"
    urn: "URN:CNFX:ME:CENTRIFUGAL_PUMP"
    interface_type: "physical-logic-coupled"
  heat-exchanger:
    type: "device"
    urn: "URN:CNFX:ME:HEAT_EXCHANGER"
    interface_type: "physical-logic-coupled"
  control-valve-bank:
    type: "part"
    urn: "URN:CNFX:ME:CONTROL_VALVE_BANK"
    interface_type: "physical-logic-coupled"
manufacturing_compliance:
  - standard: "ISO 9001:2015 - QUALITY MANAGEMENT SYSTEMS"
    scope: "Verified Engineering Specification"
  - standard: "ANSI/ASME BPE-2019 - BIOPROCESSING EQUIPMENT"
    scope: "Verified Engineering Specification"
url: "https://cnfx.com/llms/industry/beverage-manufacturing/product/cip-cleaning-module.md"
on_chain_sovereignty:
  contract_standard: "ERC-721-Industrial"
  metadata_hash: "44fd69d8413c9a12509987d6b0ae834d5b9cf8252b35f1d643d974d41a6ffd3f"
  royalty_logic: "IPFS-CID-REQUIRED"
  mint_status: "logic-verified-ready"
version: "3.3.4-EXTREME-SOVEREIGN-WEB3"
---

# Industrial Specification: CIP Cleaning Module

## 1. Technical Definition
Automated cleaning component for sanitizing keg and barrel filling lines without disassembly

## 2. Engineering Reasoning & Causal Matrix
> **Operational Intelligence**: Designed for **2.5-6.0 bar (36-87 psi) at 75-85°C with 1.5-3.0% caustic solution concentration**. Failure boundary: **Pressure exceeding 8.3 bar (120 psi) at 90°C causes gasket extrusion; flow velocity below 1.2 m/s fails to achieve 5-log pathogen reduction**, Mechanism: **Caustic-induced stress corrosion cracking (SCC) in 316L stainless steel at chloride concentrations &gt;25 ppm above 80°C; thermal expansion mismatch between PTFE seals (CTE 135×10⁻⁶/K) and 316L stainless steel (CTE 16×10⁻⁶/K) at ΔT&gt;40°C**.

### 2.1 Analytical Physics Model
Governed by the **Hansen Solubility Distance (HSP)**:

> **Primary Equation**: $R_a = \sqrt{4\Delta\delta_d^2 + \Delta\delta_p^2 + \Delta\delta_h^2}$  
> **Engineering Impact**: Predicts seal/gasket swelling when exposed to CIP chemicals.

| Symbol | Variable Definition | Localized Reference |
| :--- | :--- | :--- |
| \delta_d | Dispersive | Engineering Constant |
| \delta_p | Polar | Engineering Constant |
| \delta_h | Hydrogen | Engineering Constant |

### 2.2 FMEA (Failure Mode & Effects Analysis)
| Event Trigger | Severity | Failure Mode | Mitigation Strategy |
| :--- | :--- | :--- | :--- |
| CIP solution temperature controller PID windup causing overshoot to 95°C | 8 | Thermal expansion-induced seal extrusion and spray nozzle deformation | Dual redundant RTD sensors with 0.1°C resolution and independent safety PLC implementing IEC 61508 SIL-2 rated thermal shutdown at 88°C |
| Caustic solution concentration sensor drift (Mempros MP-103) reading 1.8% actual 3.5% | 8 | Accelerated chloride stress corrosion cracking at weld HAZ regions | Coriolis mass flow meter (Krohne Optimass 7400) with 0.05% concentration accuracy and automated daily calibration against reference conductivity cell |

## 3. Key Technical Parameters
| Parameter | Value | Unit | Status |
| :--- | :--- | :--- | :--- |
| spec | Config-dependent | L/min | Verified |

## 4. System BOM & Knowledge Routing
### Core Components (Recursive Links)
- [Solution Tank](https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/solution-tank.md) `(Standalone System)`
- [Centrifugal Pump](https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/centrifugal-pump.md) `(Standalone System)`
- [Heat Exchanger](https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/heat-exchanger.md) `(Standalone System)`
- [Control Valve Bank](https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/control-valve-bank.md) `(Standalone System)`

### Industrial DNA Context (De-duplicated)
**Complementary Dependencies**: **Chemical Dosing System**, **High-Pressure Pump Station**, **Automated Valve Manifold**  
**Downstream Applications**: Sanitized Beer Kegs, Cleaned Wine Barrels, Sterilized Beverage Filling Lines  

## 5. Engineering Risks & FAQ
- **Caution**: 
- **Caution**: 
- **Caution**: 

### Q: How does this CIP module clean without disassembly?
**A**: The module uses automated circulation of cleaning solutions through the existing piping system, eliminating the need to dismantle keg and barrel filling lines for sanitation.

### Q: Why is Stainless Steel 316L used for this cleaning module?
**A**: Stainless Steel 316L offers superior corrosion resistance against cleaning chemicals and beverages, ensuring durability and maintaining hygiene standards in beverage manufacturing environments.

### Q: What maintenance does the centrifugal pump in the BOM require?
**A**: The centrifugal pump requires regular inspection of seals and bearings, with recommended quarterly maintenance checks to ensure optimal cleaning pressure and flow rates for effective sanitation cycles.

## 6. Manufacturing Compliance
- ISO 9001:2015 - QUALITY MANAGEMENT SYSTEMS
- ANSI/ASME BPE-2019 - BIOPROCESSING EQUIPMENT

---
### 🛠️ Engineering Resource Access
🔗 **[Full Specification: CIP Cleaning Module](https://cnfx.com/industry/beverage-manufacturing/product/cip-cleaning-module)**

### 🌐 Knowledge Graph Topology
> **Node Status**: Verified Engineering Spec
> **Connectivity**: Linked to **4** standalone system nodes
> **Global Context**: Part of a 5,814 node industrial cluster within the CNFX Graph

> **Reference ID**: CIP_CLEANING_MODULE | **Authority**: CNFX-2026-ST-001 | **Fingerprint**: d0d0ef70
