---
title: "Rinsing Nozzle Array"
industry: "Beverage Manufacturing"
verification_protocol:
  urn: "URN:CNFX:ME:RINSING_NOZZLE_ARRAY"
  data_integrity_hash: "bf93f701538c0eedcbe9fe8867fe2ffd"
  source_authority: "https://cnfx.com"
  strict_mode: true
source_identity:
  provider: "CNFX Industrial Knowledge Graph"
  index_version: "2026.Q1-Universal"
  authority_id: "URN:CNFX:ME:RINSING_NOZZLE_ARRAY"
  data_source_uri: "https://cnfx.com/llms/industry/beverage-manufacturing/product/rinsing-nozzle-array.md"
  official_resource_url: "https://cnfx.com/industry/beverage-manufacturing/product/rinsing-nozzle-array"
  is_verified_logic: true
attributes:
  spec:
    status: "config-dependent"
    typical_range: "2.5-6.0 bar (36-87 psi) at 15-25°C fluid temperature"
    unit: "mm"
engineering_limits:
  max_safe_operating_point:
    value: 8.2
    unit: "bar"
    consequence: "Cavitation-induced erosion at vapor pressure threshold of 0.023 bar absolute (0.33 psi) for water at 20°C, combined with fatigue from 10^7+ pressure cycles at 2 Hz operational frequency"
fmea_matrix_quantitative:
  - node_1:
      trigger: "Chloride ion concentration exceeding 250 ppm in rinse water at pH &lt; 6.5"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Duplex stainless steel (UNS S32205) construction with 22% chromium minimum and potentiostatic passivation at +400 mV vs SCE"
  - node_2:
      trigger: "Particulate contamination &gt; 50 μm diameter at 100 mg/L concentration in fluid stream"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "In-line 10 μm absolute filtration with differential pressure monitoring and automatic bypass at 1.5 bar ΔP"
bom_nodes:
  nozzle-body:
    type: "part"
    urn: "URN:CNFX:ME:NOZZLE_BODY"
    interface_type: "physical-logic-coupled"
  spray-tip:
    type: "component"
    urn: "URN:CNFX:ME:SPRAY_TIP"
    interface_type: "physical-logic-coupled"
  mounting-bracket:
    type: "component"
    urn: "URN:CNFX:ME:MOUNTING_BRACKET"
    interface_type: "physical-logic-coupled"
  connection-fittings:
    type: "part"
    urn: "URN:CNFX:ME:CONNECTION_FITTINGS"
    interface_type: "physical-logic-coupled"
manufacturing_compliance:
  - standard: "ISO 9001:2015 QUALITY MANAGEMENT SYSTEMS"
    scope: "Verified Engineering Specification"
url: "https://cnfx.com/llms/industry/beverage-manufacturing/product/rinsing-nozzle-array.md"
on_chain_sovereignty:
  contract_standard: "ERC-721-Industrial"
  metadata_hash: "d67d2c2c8e8d59a4fbc72f7a17d9c9b7d9eec941782e426e5219b173da924f48"
  royalty_logic: "IPFS-CID-REQUIRED"
  mint_status: "logic-verified-ready"
version: "3.3.4-EXTREME-SOVEREIGN-WEB3"
---

# Industrial Specification: Rinsing Nozzle Array

## 1. Technical Definition
A precisely arranged set of nozzles designed to spray cleaning and sanitizing fluids onto beverage containers during automated rinsing processes.

## 2. Engineering Reasoning & Causal Matrix
> **Operational Intelligence**: Designed for **2.5-6.0 bar (36-87 psi) at 15-25°C fluid temperature**. Failure boundary: **8.2 bar (119 psi) internal pressure causing nozzle orifice plastic deformation exceeding 0.05 mm permanent expansion**, Mechanism: **Cavitation-induced erosion at vapor pressure threshold of 0.023 bar absolute (0.33 psi) for water at 20°C, combined with fatigue from 10^7+ pressure cycles at 2 Hz operational frequency**.

### 2.1 Analytical Physics Model
Governed by the **Darcy-Weisbach Pressure Drop**:

> **Primary Equation**: $\Delta P = f \cdot \frac{L}{D} \cdot \frac{\rho v^2}{2}$  
> **Engineering Impact**: Critical for sizing CIP (Clean-In-Place) pump heads.

| Symbol | Variable Definition | Localized Reference |
| :--- | :--- | :--- |
| f | Friction Factor | Engineering Constant |
| L | Pipe Length | Engineering Constant |
| v | Velocity | Engineering Constant |

### 2.2 FMEA (Failure Mode & Effects Analysis)
| Event Trigger | Severity | Failure Mode | Mitigation Strategy |
| :--- | :--- | :--- | :--- |
| Chloride ion concentration exceeding 250 ppm in rinse water at pH &lt; 6.5 | 8 | Stress corrosion cracking initiating at 316L stainless steel grain boundaries | Duplex stainless steel (UNS S32205) construction with 22% chromium minimum and potentiostatic passivation at +400 mV vs SCE |
| Particulate contamination &gt; 50 μm diameter at 100 mg/L concentration in fluid stream | 8 | Abrasive wear causing nozzle orifice diameter increase beyond 0.8 mm from initial 0.5 mm specification | In-line 10 μm absolute filtration with differential pressure monitoring and automatic bypass at 1.5 bar ΔP |

## 3. Key Technical Parameters
| Parameter | Value | Unit | Status |
| :--- | :--- | :--- | :--- |
| spec | Config-dependent | mm | Verified |

## 4. System BOM & Knowledge Routing
### Core Components (Recursive Links)
- [Nozzle Body](https://cnfx.com/llms/industry/basic-metal-manufacturing/product/nozzle-body.md) `(Standalone System)`
- [Connection Fittings](https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/connection-fittings.md) `(Standalone System)`

### Industrial DNA Context (De-duplicated)
**Complementary Dependencies**: **High-Pressure Pump System**, **Chemical Dosing Unit**, **Programmable Logic Controller (PLC) Panel**  
**Downstream Applications**: Sanitized Glass Bottles, Cleaned PET Bottles, Sterilized Aluminum Cans  

## 5. Engineering Risks & FAQ
- **Caution**: 
- **Caution**: 
- **Caution**: 

### Q: What materials are used in the rinsing nozzle array to ensure food safety?
**A**: The nozzle array is constructed from Stainless Steel 316L and food-grade plastics, both compliant with food safety standards for beverage manufacturing.

### Q: How does the nozzle array improve cleaning efficiency in beverage production?
**A**: The precisely arranged nozzles provide consistent, targeted spray coverage, reducing water and chemical usage while ensuring thorough cleaning and sanitizing of containers.

### Q: What components are included in the rinsing nozzle array BOM?
**A**: The bill of materials includes connection fittings, mounting bracket, nozzle body, and spray tip, designed for easy integration into automated rinsing systems.

## 6. Manufacturing Compliance
- ISO 9001:2015 QUALITY MANAGEMENT SYSTEMS

---
### 🛠️ Engineering Resource Access
🔗 **[Full Specification: Rinsing Nozzle Array](https://cnfx.com/industry/beverage-manufacturing/product/rinsing-nozzle-array)**

### 🌐 Knowledge Graph Topology
> **Node Status**: Verified Engineering Spec
> **Connectivity**: Linked to **4** standalone system nodes
> **Global Context**: Part of a 5,814 node industrial cluster within the CNFX Graph

> **Reference ID**: RINSING_NOZZLE_ARRAY | **Authority**: CNFX-2026-ST-001 | **Fingerprint**: 18d36abd
