---
title: "Automated Lens Mounting Fixture"
industry: "Computer, Electronic and Optical Product Manufacturing"
verification_protocol:
  urn: "URN:CNFX:ME:AUTOMATED_LENS_MOUNTING_FIXTURE"
  data_integrity_hash: "f34a1946f975bd4adc35910580b6ccff"
  source_authority: "https://cnfx.com"
  strict_mode: true
source_identity:
  provider: "CNFX Industrial Knowledge Graph"
  index_version: "2026.Q1-Universal"
  authority_id: "URN:CNFX:ME:AUTOMATED_LENS_MOUNTING_FIXTURE"
  data_source_uri: "https://cnfx.com/llms/industry/computer-electronic-and-optical-product-manufacturing/product/automated-lens-mounting-fixture.md"
  official_resource_url: "https://cnfx.com/industry/computer-electronic-and-optical-product-manufacturing/product/automated-lens-mounting-fixture"
  is_verified_logic: true
attributes:
  spec:
    status: "config-dependent"
    typical_range: "0.5-5.0 NÂ·m torque application, 0.01-0.05 mm positional tolerance, 15-35Â°C ambient temperature"
    unit: "mm"
engineering_limits:
  max_safe_operating_point:
    value: 7.5
    unit: "NÂ"
    consequence: "Yield strength of 6061-T6 aluminum alloy (276 MPa) exceeded at 7.5 NÂ·m, thermal expansion coefficient mismatch between aluminum (23.1Ã—10â»â¶/Â°C) and steel (11.8Ã—10â»â¶/Â°C) components, Hertzian contact stress exceeding 400 MPa at jaw-lens interface"
fmea_matrix_quantitative:
  - node_1:
      trigger: "Pneumatic actuator pressure drop below 0.4 MPa"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Dual-redundant pressure sensors with 0.1 MPa resolution and automatic system shutdown"
  - node_2:
      trigger: "Lead screw backlash accumulation exceeding 0.03 mm"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Precision ground ball screw with 0.005 mm backlash and quarterly laser interferometer calibration"
bom_nodes:
  base-frame:
    type: "component"
    urn: "URN:CNFX:ME:BASE_FRAME"
    interface_type: "physical-logic-coupled"
  clamping-mechanism-jawschuck:
    type: "part"
    urn: "URN:CNFX:ME:CLAMPING_MECHANISM_JAWSCHUCK"
    interface_type: "physical-logic-coupled"
  actuator-pneumatic-cylinderservo-motor:
    type: "part"
    urn: "URN:CNFX:ME:ACTUATOR_PNEUMATIC_CYLINDERSERVO_MOTOR"
    interface_type: "physical-logic-coupled"
  position-sensor:
    type: "part"
    urn: "URN:CNFX:ME:POSITION_SENSOR"
    interface_type: "physical-logic-coupled"
manufacturing_compliance:
  - standard: "ISO 10110-7:2017 (OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - SURFACE IMPERFECTION TOLERANCES)"
    scope: "Verified Engineering Specification"
  - standard: "ANSI/ASME B46.1-2019 (SURFACE TEXTURE, SURFACE ROUGHNESS, WAVINESS, AND LAY)"
    scope: "Verified Engineering Specification"
  - standard: "DIN 3140-5:2019 (DIMENSIONS AND TOLERANCES FOR OPTICAL COMPONENTS - MOUNTING OF OPTICAL COMPONENTS)"
    scope: "Verified Engineering Specification"
url: "https://cnfx.com/llms/industry/computer-electronic-and-optical-product-manufacturing/product/automated-lens-mounting-fixture.md"
on_chain_sovereignty:
  contract_standard: "ERC-721-Industrial"
  metadata_hash: "d1d65dd0d3499d613f3d9ceab7d2d47c81c2721fcb1357e2e9bc7f97f416a85d"
  royalty_logic: "IPFS-CID-REQUIRED"
  mint_status: "logic-verified-ready"
version: "3.3.4-EXTREME-SOVEREIGN-WEB3"
---

# Industrial Specification: Automated Lens Mounting Fixture

## 1. Technical Definition
A precision mechanical fixture designed to automatically hold, position, and secure optical lenses during mounting processes within an inspection system.

## 2. Engineering Reasoning & Causal Matrix
> **Operational Intelligence**: Designed for **0.5-5.0 NÂ·m torque application, 0.01-0.05 mm positional tolerance, 15-35Â°C ambient temperature**. Failure boundary: **Exceeding 7.5 NÂ·m torque causes permanent deformation of clamping jaws, positional error &gt;0.1 mm results in misalignment, temperature &gt;45Â°C induces thermal expansion exceeding 0.02 mm**, Mechanism: **Yield strength of 6061-T6 aluminum alloy (276 MPa) exceeded at 7.5 NÂ·m, thermal expansion coefficient mismatch between aluminum (23.1Ã—10â»â¶/Â°C) and steel (11.8Ã—10â»â¶/Â°C) components, Hertzian contact stress exceeding 400 MPa at jaw-lens interface**.

### 2.1 Analytical Physics Model
Governed by the **Rayleigh Resolution Criterion**:

> **Primary Equation**: $d = \frac{0.61 \lambda}{NA}$  
> **Engineering Impact**: Defines the theoretical limit of machine vision systems.

| Symbol | Variable Definition | Localized Reference |
| :--- | :--- | :--- |
| \lambda | Wavelength | Engineering Constant |
| NA | Numerical Aperture | Engineering Constant |

### 2.2 FMEA (Failure Mode & Effects Analysis)
| Event Trigger | Severity | Failure Mode | Mitigation Strategy |
| :--- | :--- | :--- | :--- |
| Pneumatic actuator pressure drop below 0.4 MPa | 8 | Insufficient clamping force causing lens slippage during mounting | Dual-redundant pressure sensors with 0.1 MPa resolution and automatic system shutdown |
| Lead screw backlash accumulation exceeding 0.03 mm | 8 | Progressive positioning inaccuracy leading to mounting misalignment | Precision ground ball screw with 0.005 mm backlash and quarterly laser interferometer calibration |

## 3. Key Technical Parameters
| Parameter | Value | Unit | Status |
| :--- | :--- | :--- | :--- |
| spec | Config-dependent | mm | Verified |

## 4. System BOM & Knowledge Routing
### Core Components (Recursive Links)
- [Clamping Mechanism (Jaws/Chuck)](https://cnfx.com/llms/industry/computer-electronic-and-optical-product-manufacturing/product/clamping-mechanism-jawschuck.md) `(Standalone System)`
- [Actuator (Pneumatic Cylinder/Servo Motor)](https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/actuator-pneumatic-cylinderservo-motor.md) `(Standalone System)`
- [Position Sensor](https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/position-sensor.md) `(Standalone System)`

### Industrial DNA Context (De-duplicated)
**Complementary Dependencies**: **Precision Vision Inspection System**, **Clean Room Environment Control System**, **Automated Conveyor System**  
**Downstream Applications**: Camera Modules, Medical Imaging Devices, Industrial Optical Sensors  

## 5. Engineering Risks & FAQ
- **Caution**: 
- **Caution**: 
- **Caution**: 

### Q: What materials are used in the Automated Lens Mounting Fixture?
**A**: The fixture is constructed from high-quality materials including Stainless Steel (304/316), Anodized Aluminum Alloy, and Engineering Plastics such as PEEK and Delrin for durability, corrosion resistance, and precision.

### Q: How does the Automated Lens Mounting Fixture improve optical manufacturing processes?
**A**: It automates the holding, positioning, and securing of optical lenses during mounting, reducing manual handling errors, increasing throughput, and ensuring consistent alignment in inspection systems.

### Q: What components are included in the Bill of Materials (BOM)?
**A**: The BOM includes an Actuator (Pneumatic Cylinder or Servo Motor), Base Frame, Clamping Mechanism (Jaws or Chuck), and Position Sensor for precise control and feedback.

## 6. Manufacturing Compliance
- ISO 10110-7:2017 (OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - SURFACE IMPERFECTION TOLERANCES)
- ANSI/ASME B46.1-2019 (SURFACE TEXTURE, SURFACE ROUGHNESS, WAVINESS, AND LAY)
- DIN 3140-5:2019 (DIMENSIONS AND TOLERANCES FOR OPTICAL COMPONENTS - MOUNTING OF OPTICAL COMPONENTS)

---
### ðŸ› ï¸ Engineering Resource Access
ðŸ”— **[Full Specification: Automated Lens Mounting Fixture](https://cnfx.com/industry/computer-electronic-and-optical-product-manufacturing/product/automated-lens-mounting-fixture)**

### ðŸŒ Knowledge Graph Topology
> **Node Status**: Verified Engineering Spec
> **Connectivity**: Linked to **4** standalone system nodes
> **Global Context**: Part of a 5,814 node industrial cluster within the CNFX Graph

> **Reference ID**: AUTOMATED_LENS_MOUNTING_FIXTURE | **Authority**: CNFX-2026-ST-001 | **Fingerprint**: bbb366c9
