---
title: "Housing with Cooling"
industry: "Computer, Electronic and Optical Product Manufacturing"
verification_protocol:
  urn: "URN:CNFX:ME:HOUSING_WITH_COOLING"
  data_integrity_hash: "a2e1f52c9642c95feb8cdf3f480d0cca"
  source_authority: "https://cnfx.com"
  strict_mode: true
source_identity:
  provider: "CNFX Industrial Knowledge Graph"
  index_version: "2026.Q1-Universal"
  authority_id: "URN:CNFX:ME:HOUSING_WITH_COOLING"
  data_source_uri: "https://cnfx.com/llms/industry/computer-electronic-and-optical-product-manufacturing/product/housing-with-cooling.md"
  official_resource_url: "https://cnfx.com/industry/computer-electronic-and-optical-product-manufacturing/product/housing-with-cooling"
  is_verified_logic: true
attributes:
  spec:
    status: "config-dependent"
    typical_range: "0-60°C ambient temperature, 0-95% relative humidity non-condensing"
    unit: "mm"
engineering_limits:
  max_safe_operating_point:
    value: 85
    unit: "°C"
    consequence: "Thermal expansion coefficient mismatch between aluminum housing (23.1 μm/m·K) and internal components (e.g., PCB at 17 ppm/°C) causing mechanical stress exceeding yield strength of mounting points"
fmea_matrix_quantitative:
  - node_1:
      trigger: "Cooling fan bearing wear reaching 0.5mm radial play"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Dual redundant fans with differential pressure monitoring and automatic switchover at 15% flow reduction"
  - node_2:
      trigger: "Thermal interface material degradation with thermal conductivity dropping below 3 W/m·K"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Phase-change thermal interface material with melting point at 45°C and automatic replacement indicator at 5000 thermal cycles"
bom_nodes:
  heat-sink:
    type: "component"
    urn: "URN:CNFX:ME:HEAT_SINK"
    interface_type: "physical-logic-coupled"
  thermal-interface-material:
    type: "component"
    urn: "URN:CNFX:ME:THERMAL_INTERFACE_MATERIAL"
    interface_type: "physical-logic-coupled"
  mounting-brackets:
    type: "component"
    urn: "URN:CNFX:ME:MOUNTING_BRACKETS"
    interface_type: "physical-logic-coupled"
manufacturing_compliance:
  - standard: "ISO 9001:2015 - QUALITY MANAGEMENT SYSTEMS"
    scope: "Verified Engineering Specification"
  - standard: "CE MARKING - DIRECTIVE 2006/42/EC FOR MACHINERY SAFETY"
    scope: "Verified Engineering Specification"
url: "https://cnfx.com/llms/industry/computer-electronic-and-optical-product-manufacturing/product/housing-with-cooling.md"
on_chain_sovereignty:
  contract_standard: "ERC-721-Industrial"
  metadata_hash: "0480745cf56859c3693b3a029efac6cb50f7ec6b61049e1eae56f7ff886a9df6"
  royalty_logic: "IPFS-CID-REQUIRED"
  mint_status: "logic-verified-ready"
version: "3.3.4-EXTREME-SOVEREIGN-WEB3"
---

# Industrial Specification: Housing with Cooling

## 1. Technical Definition
A protective enclosure for line scan camera components that incorporates cooling mechanisms to dissipate heat generated during operation.

## 2. Engineering Reasoning & Causal Matrix
> **Operational Intelligence**: Designed for **0-60°C ambient temperature, 0-95% relative humidity non-condensing**. Failure boundary: **Internal component temperature exceeding 85°C for &gt;30 minutes or housing surface temperature &gt;70°C**, Mechanism: **Thermal expansion coefficient mismatch between aluminum housing (23.1 μm/m·K) and internal components (e.g., PCB at 17 ppm/°C) causing mechanical stress exceeding yield strength of mounting points**.

### 2.1 Analytical Physics Model
Governed by the **LMTD Logarithmic Mean Temperature Difference**:

> **Primary Equation**: $Q = U \cdot A \cdot \Delta T_{lm}$  
> **Engineering Impact**: Sizing validation for pasteurization and cooling tunnels.

| Symbol | Variable Definition | Localized Reference |
| :--- | :--- | :--- |
| U | Heat Transfer Coeff | Engineering Constant |
| A | Area | Engineering Constant |
| \Delta T_{lm} | LMTD | Engineering Constant |

### 2.2 FMEA (Failure Mode & Effects Analysis)
| Event Trigger | Severity | Failure Mode | Mitigation Strategy |
| :--- | :--- | :--- | :--- |
| Cooling fan bearing wear reaching 0.5mm radial play | 8 | Airflow reduction from 25 CFM to &lt;8 CFM causing 15°C/min temperature rise | Dual redundant fans with differential pressure monitoring and automatic switchover at 15% flow reduction |
| Thermal interface material degradation with thermal conductivity dropping below 3 W/m·K | 8 | Thermal resistance increase from 0.5°C/W to &gt;2.0°C/W causing hotspot formation | Phase-change thermal interface material with melting point at 45°C and automatic replacement indicator at 5000 thermal cycles |

## 3. Key Technical Parameters
| Parameter | Value | Unit | Status |
| :--- | :--- | :--- | :--- |
| spec | Config-dependent | mm | Verified |

## 4. System BOM & Knowledge Routing
### Core Components (Recursive Links)

### Industrial DNA Context (De-duplicated)
**Complementary Dependencies**: **Thermal Management System**, **Precision Assembly Station**, **Automated Testing Equipment**  
**Downstream Applications**: Industrial Line Scan Cameras, Machine Vision Systems, Automated Optical Inspection Equipment  

## 5. Engineering Risks & FAQ
- **Caution**: 
- **Caution**: 
- **Caution**: 

### Q: What materials are used in this cooling housing?
**A**: The housing is constructed from aluminum alloy and thermally conductive plastic to optimize heat dissipation while providing durable protection for line scan camera components.

### Q: How does this housing manage heat from line scan cameras?
**A**: It incorporates heat sinks, thermal interface materials, and mounting brackets to efficiently transfer and dissipate heat generated during camera operation, preventing overheating.

### Q: Is this housing compatible with standard line scan camera models?
**A**: Yes, it is designed with universal mounting brackets and adjustable components to fit most standard line scan cameras used in computer and optical product manufacturing.

## 6. Manufacturing Compliance
- ISO 9001:2015 - QUALITY MANAGEMENT SYSTEMS
- CE MARKING - DIRECTIVE 2006/42/EC FOR MACHINERY SAFETY

---
### 🛠️ Engineering Resource Access
🔗 **[Full Specification: Housing with Cooling](https://cnfx.com/industry/computer-electronic-and-optical-product-manufacturing/product/housing-with-cooling)**

### 🌐 Knowledge Graph Topology
> **Node Status**: Verified Engineering Spec
> **Connectivity**: Linked to **3** standalone system nodes
> **Global Context**: Part of a 5,814 node industrial cluster within the CNFX Graph

> **Reference ID**: HOUSING_WITH_COOLING | **Authority**: CNFX-2026-ST-001 | **Fingerprint**: 4e955dea
