---
title: "Mirror Mount Assembly"
industry: "Computer, Electronic and Optical Product Manufacturing"
verification_protocol:
  urn: "URN:CNFX:ME:MIRROR_MOUNT_ASSEMBLY"
  data_integrity_hash: "7040af7c5c471c1c8667739cba156c30"
  source_authority: "https://cnfx.com"
  strict_mode: true
source_identity:
  provider: "CNFX Industrial Knowledge Graph"
  index_version: "2026.Q1-Universal"
  authority_id: "URN:CNFX:ME:MIRROR_MOUNT_ASSEMBLY"
  data_source_uri: "https://cnfx.com/llms/industry/computer-electronic-and-optical-product-manufacturing/product/mirror-mount-assembly.md"
  official_resource_url: "https://cnfx.com/industry/computer-electronic-and-optical-product-manufacturing/product/mirror-mount-assembly"
  is_verified_logic: true
attributes:
  spec:
    status: "config-dependent"
    typical_range: "0.1-5.0 μm positional adjustment range, ±0.5 arcmin angular adjustment range"
    unit: "arcsec"
engineering_limits:
  max_safe_operating_point:
    value: 0.1
    unit: "arcsec"
    consequence: "Micro-yielding of flexure elements at stress concentrations exceeding 350 MPa, causing permanent deformation in kinematic mount interfaces"
fmea_matrix_quantitative:
  - node_1:
      trigger: "Thermal expansion mismatch between invar (1.2×10⁻⁶/K) and aluminum (23.1×10⁻⁶/K) mounting components"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Isostatic mounting with matched CTE materials and thermal compensation flexures"
  - node_2:
      trigger: "Vibration-induced fretting at adjustment screw interfaces with contact pressure &gt;200 MPa"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Preloaded anti-backlash mechanisms with MoS₂-coated threads and locking features"
bom_nodes:
  base-plate:
    type: "component"
    urn: "URN:CNFX:ME:BASE_PLATE"
    interface_type: "physical-logic-coupled"
  mirror-holder-kinematic-platform:
    type: "part"
    urn: "URN:CNFX:ME:MIRROR_HOLDER_KINEMATIC_PLATFORM"
    interface_type: "physical-logic-coupled"
  adjustment-screws-pitch-yaw:
    type: "component"
    urn: "URN:CNFX:ME:ADJUSTMENT_SCREWS_PITCH_YAW"
    interface_type: "physical-logic-coupled"
  locking-screws:
    type: "component"
    urn: "URN:CNFX:ME:LOCKING_SCREWS"
    interface_type: "physical-logic-coupled"
manufacturing_compliance:
  - standard: "ISO 10110-7:2017 (OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 7: SURFACE IMPERFECTION TOLERANCES)"
    scope: "Verified Engineering Specification"
  - standard: "ANSI/ASME Y14.5-2018 (DIMENSIONING AND TOLERANCING)"
    scope: "Verified Engineering Specification"
url: "https://cnfx.com/llms/industry/computer-electronic-and-optical-product-manufacturing/product/mirror-mount-assembly.md"
on_chain_sovereignty:
  contract_standard: "ERC-721-Industrial"
  metadata_hash: "f787d93ecb8f8577d5ec4c3300671519ad646291fd341de1b5944a6b273795db"
  royalty_logic: "IPFS-CID-REQUIRED"
  mint_status: "logic-verified-ready"
version: "3.3.4-EXTREME-SOVEREIGN-WEB3"
---

# Industrial Specification: Mirror Mount Assembly

## 1. Technical Definition
A precision mechanical assembly designed to securely hold and precisely adjust the position and orientation of optical mirrors within a laser system.

## 2. Engineering Reasoning & Causal Matrix
> **Operational Intelligence**: Designed for **0.1-5.0 μm positional adjustment range, ±0.5 arcmin angular adjustment range**. Failure boundary: **Exceeding 0.02 μm RMS surface deformation or 0.1 arcsec hysteresis in adjustment mechanisms**, Mechanism: **Micro-yielding of flexure elements at stress concentrations exceeding 350 MPa, causing permanent deformation in kinematic mount interfaces**.

### 2.1 Analytical Physics Model
Governed by the **Rayleigh Resolution Criterion**:

> **Primary Equation**: $d = \frac{0.61 \lambda}{NA}$  
> **Engineering Impact**: Defines the theoretical limit of machine vision systems.

| Symbol | Variable Definition | Localized Reference |
| :--- | :--- | :--- |
| \lambda | Wavelength | Engineering Constant |
| NA | Numerical Aperture | Engineering Constant |

### 2.2 FMEA (Failure Mode & Effects Analysis)
| Event Trigger | Severity | Failure Mode | Mitigation Strategy |
| :--- | :--- | :--- | :--- |
| Thermal expansion mismatch between invar (1.2×10⁻⁶/K) and aluminum (23.1×10⁻⁶/K) mounting components | 8 | Mirror surface distortion exceeding λ/10 at 632.8 nm wavelength | Isostatic mounting with matched CTE materials and thermal compensation flexures |
| Vibration-induced fretting at adjustment screw interfaces with contact pressure &gt;200 MPa | 8 | Positional drift exceeding 50 nm/hour under 5-500 Hz vibration spectrum | Preloaded anti-backlash mechanisms with MoS₂-coated threads and locking features |

## 3. Key Technical Parameters
| Parameter | Value | Unit | Status |
| :--- | :--- | :--- | :--- |
| spec | Config-dependent | arcsec | Verified |

## 4. System BOM & Knowledge Routing
### Core Components (Recursive Links)
- [Mirror Holder / Kinematic Platform](https://cnfx.com/llms/industry/computer-electronic-and-optical-product-manufacturing/product/mirror-holder-kinematic-platform.md) `(Standalone System)`

### Industrial DNA Context (De-duplicated)
**Complementary Dependencies**: **Laser Alignment System**, **Optical Test Bench**, **Clean Room Environment**  
**Downstream Applications**: Laser Cutting Systems, Medical Laser Devices, Scientific Research Lasers  

## 5. Engineering Risks & FAQ
- **Caution**: 
- **Caution**: 
- **Caution**: 

### Q: What materials are used in this mirror mount assembly?
**A**: This assembly is constructed from high-grade Aluminum Alloy (6061-T6) for lightweight stability and Stainless Steel components for durability and corrosion resistance in precision optical applications.

### Q: How does the kinematic platform provide precise mirror adjustment?
**A**: The kinematic platform features fine-pitch adjustment screws for pitch and yaw control, allowing micron-level positioning accuracy with locking screws to secure the mirror position once aligned in your laser system.

### Q: What industries typically use this type of mirror mount assembly?
**A**: This assembly is designed for Computer, Electronic and Optical Product Manufacturing industries, specifically for laser systems, optical instrumentation, research laboratories, and precision measurement equipment requiring stable mirror positioning.

## 6. Manufacturing Compliance
- ISO 10110-7:2017 (OPTICS AND PHOTONICS - PREPARATION OF DRAWINGS FOR OPTICAL ELEMENTS AND SYSTEMS - PART 7: SURFACE IMPERFECTION TOLERANCES)
- ANSI/ASME Y14.5-2018 (DIMENSIONING AND TOLERANCING)

---
### 🛠️ Engineering Resource Access
🔗 **[Full Specification: Mirror Mount Assembly](https://cnfx.com/industry/computer-electronic-and-optical-product-manufacturing/product/mirror-mount-assembly)**

### 🌐 Knowledge Graph Topology
> **Node Status**: Verified Engineering Spec
> **Connectivity**: Linked to **4** standalone system nodes
> **Global Context**: Part of a 5,814 node industrial cluster within the CNFX Graph

> **Reference ID**: MIRROR_MOUNT_ASSEMBLY | **Authority**: CNFX-2026-ST-001 | **Fingerprint**: 78421008
