---
title: "PCB Conveyor System"
industry: "Computer, Electronic and Optical Product Manufacturing"
verification_protocol:
  urn: "URN:CNFX:ME:PCB_CONVEYOR_SYSTEM"
  data_integrity_hash: "32bca1cbb953017e3cf0bf3a4be7fec8"
  source_authority: "https://cnfx.com"
  strict_mode: true
source_identity:
  provider: "CNFX Industrial Knowledge Graph"
  index_version: "2026.Q1-Universal"
  authority_id: "URN:CNFX:ME:PCB_CONVEYOR_SYSTEM"
  data_source_uri: "https://cnfx.com/llms/industry/computer-electronic-and-optical-product-manufacturing/product/pcb-conveyor-system.md"
  official_resource_url: "https://cnfx.com/industry/computer-electronic-and-optical-product-manufacturing/product/pcb-conveyor-system"
  is_verified_logic: true
attributes:
  spec:
    status: "config-dependent"
    typical_range: "0.5-2.0 m/s linear velocity, 0.1-1.0 mm positional accuracy"
    unit: "mm"
engineering_limits:
  max_safe_operating_point:
    value: 150
    unit: "N"
    consequence: "Polyurethane belt material exceeds elastic limit at 150 N/m tension, permanent magnet synchronous motor demagnetizes at 80°C due to Curie temperature effect"
fmea_matrix_quantitative:
  - node_1:
      trigger: "Accumulated electrostatic discharge exceeding 15 kV"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Integrated carbon fiber grounding strips with 10^6-10^9 Ω surface resistivity"
  - node_2:
      trigger: "Sprocket tooth wear exceeding 0.5 mm from abrasive PCB edges"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Hardened steel sprockets with 55-60 HRC surface hardness and 0.2 μm Ra finish"
bom_nodes:
  drive-motor:
    type: "part"
    urn: "URN:CNFX:ME:DRIVE_MOTOR"
    interface_type: "physical-logic-coupled"
  transport-beltroller:
    type: "component"
    urn: "URN:CNFX:ME:TRANSPORT_BELTROLLER"
    interface_type: "physical-logic-coupled"
  position-sensors:
    type: "part"
    urn: "URN:CNFX:ME:POSITION_SENSORS"
    interface_type: "physical-logic-coupled"
  alignment-guides:
    type: "component"
    urn: "URN:CNFX:ME:ALIGNMENT_GUIDES"
    interface_type: "physical-logic-coupled"
  control-interface:
    type: "part"
    urn: "URN:CNFX:ME:CONTROL_INTERFACE"
    interface_type: "physical-logic-coupled"
manufacturing_compliance:
  - standard: "ISO 9001:2015 QUALITY MANAGEMENT SYSTEMS"
    scope: "Verified Engineering Specification"
  - standard: "CE MARKING (MACHINERY DIRECTIVE 2006/42/EC)"
    scope: "Verified Engineering Specification"
url: "https://cnfx.com/llms/industry/computer-electronic-and-optical-product-manufacturing/product/pcb-conveyor-system.md"
on_chain_sovereignty:
  contract_standard: "ERC-721-Industrial"
  metadata_hash: "e2cbf2c429a4f39e4ec370bc610d9ab07e7e703dddeb27b6b0651336cf61d09d"
  royalty_logic: "IPFS-CID-REQUIRED"
  mint_status: "logic-verified-ready"
version: "3.3.4-EXTREME-SOVEREIGN-WEB3"
---

# Industrial Specification: PCB Conveyor System

## 1. Technical Definition
Automated transport system for moving printed circuit boards through assembly processes

## 2. Engineering Reasoning & Causal Matrix
> **Operational Intelligence**: Designed for **0.5-2.0 m/s linear velocity, 0.1-1.0 mm positional accuracy**. Failure boundary: **Belt tension exceeding 150 N/m causes permanent deformation, motor temperature exceeding 80°C triggers thermal shutdown**, Mechanism: **Polyurethane belt material exceeds elastic limit at 150 N/m tension, permanent magnet synchronous motor demagnetizes at 80°C due to Curie temperature effect**.

### 2.1 Analytical Physics Model
Governed by the **Tractive Power & Resistance Model**:

> **Primary Equation**: $P = \frac{F \cdot v}{\eta}$  
> **Engineering Impact**: Ensures motor torque capacity exceeds operational inertia.

| Symbol | Variable Definition | Localized Reference |
| :--- | :--- | :--- |
| F | Total Tractive Resistance | Engineering Constant |
| v | Belt Speed | Engineering Constant |
| \eta | Efficiency | Engineering Constant |

### 2.2 FMEA (Failure Mode & Effects Analysis)
| Event Trigger | Severity | Failure Mode | Mitigation Strategy |
| :--- | :--- | :--- | :--- |
| Accumulated electrostatic discharge exceeding 15 kV | 8 | PCB component damage from dielectric breakdown | Integrated carbon fiber grounding strips with 10^6-10^9 Ω surface resistivity |
| Sprocket tooth wear exceeding 0.5 mm from abrasive PCB edges | 8 | Belt slippage causing positional errors &gt;1.0 mm | Hardened steel sprockets with 55-60 HRC surface hardness and 0.2 μm Ra finish |

## 3. Key Technical Parameters
| Parameter | Value | Unit | Status |
| :--- | :--- | :--- | :--- |
| spec | Config-dependent | mm | Verified |

## 4. System BOM & Knowledge Routing
### Core Components (Recursive Links)
- [Drive Motor](https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/drive-motor.md) `(Standalone System)`
- [Position Sensors](https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/position-sensors.md) `(Standalone System)`
- [Control Interface](https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/control-interface.md) `(Standalone System)`

### Industrial DNA Context (De-duplicated)
**Complementary Dependencies**: **PCB Loader/Unloader**, **Solder Paste Printer**, **Reflow Oven**  
**Downstream Applications**: Motherboards, Graphics Cards, Smartphone Mainboards  

## 5. Engineering Risks & FAQ
- **Caution**: 
- **Caution**: 
- **Caution**: 

### Q: What materials are used in your PCB conveyor systems for durability?
**A**: Our PCB conveyor systems use anodized aluminum frames, stainless steel components, polyurethane belts, and precision bearings to ensure long-term reliability in electronic manufacturing environments.

### Q: How does the PCB conveyor system maintain proper board alignment during transport?
**A**: The system incorporates precision alignment guides and position sensors that work with the control interface to automatically adjust and maintain proper PCB positioning throughout the assembly process.

### Q: Can your PCB conveyor system integrate with existing electronic assembly equipment?
**A**: Yes, our conveyor systems feature a standardized control interface and modular design that allows seamless integration with various PCB assembly machines, soldering systems, and inspection equipment.

## 6. Manufacturing Compliance
- ISO 9001:2015 QUALITY MANAGEMENT SYSTEMS
- CE MARKING (MACHINERY DIRECTIVE 2006/42/EC)

---
### 🛠️ Engineering Resource Access
🔗 **[Full Specification: PCB Conveyor System](https://cnfx.com/industry/computer-electronic-and-optical-product-manufacturing/product/pcb-conveyor-system)**

### 🌐 Knowledge Graph Topology
> **Node Status**: Verified Engineering Spec
> **Connectivity**: Linked to **5** standalone system nodes
> **Global Context**: Part of a 5,814 node industrial cluster within the CNFX Graph

> **Reference ID**: PCB_CONVEYOR_SYSTEM | **Authority**: CNFX-2026-ST-001 | **Fingerprint**: 3469849b
