---
title: "Resin Storage and Metering System"
industry: "Electrical Equipment Manufacturing"
verification_protocol:
  urn: "URN:CNFX:ME:RESIN_STORAGE_AND_METERING_SYSTEM"
  data_integrity_hash: "2fc53864795278aa136b00a3019aa7f2"
  source_authority: "https://cnfx.com"
  strict_mode: true
source_identity:
  provider: "CNFX Industrial Knowledge Graph"
  index_version: "2026.Q1-Universal"
  authority_id: "URN:CNFX:ME:RESIN_STORAGE_AND_METERING_SYSTEM"
  data_source_uri: "https://cnfx.com/llms/industry/electrical-equipment-manufacturing/product/resin-storage-and-metering-system.md"
  official_resource_url: "https://cnfx.com/industry/electrical-equipment-manufacturing/product/resin-storage-and-metering-system"
  is_verified_logic: true
attributes:
  spec:
    status: "config-dependent"
    typical_range: "0.5-6.0 bar"
    unit: "L"
engineering_limits:
  max_safe_operating_point:
    value: 7.2
    unit: "bar"
    consequence: "Yield strength of 316L stainless steel (290 MPa) exceeded at 7.2 bar internal pressure in 150mm diameter cylindrical vessel with 3mm wall thickness"
fmea_matrix_quantitative:
  - node_1:
      trigger: "Resin viscosity increase to 850 mPa·s at 15°C"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Positive displacement gear pump with 0.5μm filtration and 40°C temperature-controlled reservoir"
  - node_2:
      trigger: "PTFE seal degradation after 5000 thermal cycles between 20-80°C"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "FKM fluorocarbon seals with 150°C continuous service temperature rating and 10000-cycle design life"
bom_nodes:
  resin-storage-tank:
    type: "part"
    urn: "URN:CNFX:ME:RESIN_STORAGE_TANK"
    interface_type: "physical-logic-coupled"
  metering-pumpvalve:
    type: "part"
    urn: "URN:CNFX:ME:METERING_PUMPVALVE"
    interface_type: "physical-logic-coupled"
  heated-transfer-lines:
    type: "part"
    urn: "URN:CNFX:ME:HEATED_TRANSFER_LINES"
    interface_type: "physical-logic-coupled"
  control-unit:
    type: "part"
    urn: "URN:CNFX:ME:CONTROL_UNIT"
    interface_type: "physical-logic-coupled"
manufacturing_compliance:
  - standard: "ISO 9001:2015 - QUALITY MANAGEMENT SYSTEMS"
    scope: "Verified Engineering Specification"
url: "https://cnfx.com/llms/industry/electrical-equipment-manufacturing/product/resin-storage-and-metering-system.md"
on_chain_sovereignty:
  contract_standard: "ERC-721-Industrial"
  metadata_hash: "8ede59d86fc4b1e0bd123c60fa8e6244c1141aaef9a6cb49d7075578d22529a0"
  royalty_logic: "IPFS-CID-REQUIRED"
  mint_status: "logic-verified-ready"
version: "3.3.4-EXTREME-SOVEREIGN-WEB3"
---

# Industrial Specification: Resin Storage and Metering System

## 1. Technical Definition
A subsystem for storing and precisely dispensing resin during transformer core impregnation processes.

## 2. Engineering Reasoning & Causal Matrix
> **Operational Intelligence**: Designed for **0.5-6.0 bar**. Failure boundary: **7.2 bar (120% of maximum operating pressure)**, Mechanism: **Yield strength of 316L stainless steel (290 MPa) exceeded at 7.2 bar internal pressure in 150mm diameter cylindrical vessel with 3mm wall thickness**.

### 2.1 Analytical Physics Model
Governed by the **Hansen Solubility Distance (HSP)**:

> **Primary Equation**: $R_a = \sqrt{4\Delta\delta_d^2 + \Delta\delta_p^2 + \Delta\delta_h^2}$  
> **Engineering Impact**: Predicts seal/gasket swelling when exposed to CIP chemicals.

| Symbol | Variable Definition | Localized Reference |
| :--- | :--- | :--- |
| \delta_d | Dispersive | Engineering Constant |
| \delta_p | Polar | Engineering Constant |
| \delta_h | Hydrogen | Engineering Constant |

### 2.2 FMEA (Failure Mode & Effects Analysis)
| Event Trigger | Severity | Failure Mode | Mitigation Strategy |
| :--- | :--- | :--- | :--- |
| Resin viscosity increase to 850 mPa·s at 15°C | 8 | Metering pump cavitation causing 0.02% volumetric accuracy deviation | Positive displacement gear pump with 0.5μm filtration and 40°C temperature-controlled reservoir |
| PTFE seal degradation after 5000 thermal cycles between 20-80°C | 8 | 0.1 mL/min resin leakage at 4.5 bar operating pressure | FKM fluorocarbon seals with 150°C continuous service temperature rating and 10000-cycle design life |

## 3. Key Technical Parameters
| Parameter | Value | Unit | Status |
| :--- | :--- | :--- | :--- |
| spec | Config-dependent | L | Verified |

## 4. System BOM & Knowledge Routing
### Core Components (Recursive Links)
- [Resin Storage Tank](https://cnfx.com/llms/industry/rubber-and-plastic-product-manufacturing/product/resin-storage-tank.md) `(Standalone System)`
- [Metering Pump/Valve](https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/metering-pumpvalve.md) `(Standalone System)`
- [Heated Transfer Lines](https://cnfx.com/llms/industry/rubber-and-plastic-product-manufacturing/product/heated-transfer-lines.md) `(Standalone System)`
- [Control Unit](https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/control-unit.md) `(Standalone System)`

### Industrial DNA Context (De-duplicated)
**Complementary Dependencies**: **Resin Mixing and Degassing System**, **Transformer Core Preheating Oven**, **Vacuum Impregnation Chamber**  
**Downstream Applications**: Power Transformers, Distribution Transformers, Instrument Transformers  

## 5. Engineering Risks & FAQ
- **Caution**: 
- **Caution**: 
- **Caution**: 

### Q: What materials are used in the resin storage and metering system for corrosion resistance?
**A**: The system features stainless steel tanks and wetted parts for durability, along with food-grade plastic seals and gaskets to prevent contamination and ensure long-term reliability in electrical manufacturing environments.

### Q: How does the heating system maintain consistent resin viscosity during transformer core impregnation?
**A**: Integrated heating elements in both the storage tank and transfer lines maintain optimal resin temperature, ensuring consistent viscosity for precise metering and uniform impregnation of transformer cores.

### Q: What components are included in the complete resin storage and metering system BOM?
**A**: The complete system includes a control unit for automation, heated transfer lines, precision metering pump/valve, and resin storage tank - all designed to work together for accurate resin dispensing in electrical equipment manufacturing.

## 6. Manufacturing Compliance
- ISO 9001:2015 - QUALITY MANAGEMENT SYSTEMS

---
### 🛠️ Engineering Resource Access
🔗 **[Full Specification: Resin Storage and Metering System](https://cnfx.com/industry/electrical-equipment-manufacturing/product/resin-storage-and-metering-system)**

### 🌐 Knowledge Graph Topology
> **Node Status**: Verified Engineering Spec
> **Connectivity**: Linked to **4** standalone system nodes
> **Global Context**: Part of a 5,814 node industrial cluster within the CNFX Graph

> **Reference ID**: RESIN_STORAGE_AND_METERING_SYSTEM | **Authority**: CNFX-2026-ST-001 | **Fingerprint**: d49bae6c
