---
title: "Slurry Supply System"
industry: "Electrical Equipment Manufacturing"
verification_protocol:
  urn: "URN:CNFX:ME:SLURRY_SUPPLY_SYSTEM"
  data_integrity_hash: "f8f0b0850cc4b5366a5dcfbd1d766cd7"
  source_authority: "https://cnfx.com"
  strict_mode: true
source_identity:
  provider: "CNFX Industrial Knowledge Graph"
  index_version: "2026.Q1-Universal"
  authority_id: "URN:CNFX:ME:SLURRY_SUPPLY_SYSTEM"
  data_source_uri: "https://cnfx.com/llms/industry/electrical-equipment-manufacturing/product/slurry-supply-system.md"
  official_resource_url: "https://cnfx.com/industry/electrical-equipment-manufacturing/product/slurry-supply-system"
  is_verified_logic: true
attributes:
  spec:
    status: "config-dependent"
    typical_range: "0.5-3.0 bar delivery pressure, 15-35°C temperature range, 0.1-5.0 m³/h flow rate"
    unit: "L/min"
engineering_limits:
  max_safe_operating_point:
    value: 0.3
    unit: "bar"
    consequence: "Non-Newtonian fluid behavior (shear-thinning) at low pressures causes viscosity increase and flow stoppage; Arrhenius equation governs solvent evaporation rate above 40°C; Reynolds number &lt;2000 indicates laminar flow failure at critical flow rates"
fmea_matrix_quantitative:
  - node_1:
      trigger: "Pump impeller wear exceeding 0.5mm clearance"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Hardened stainless steel impeller with 0.1mm maximum wear tolerance and pressure feedback control loop"
  - node_2:
      trigger: "Solvent evaporation due to temperature rise to 45°C"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Jacketed cooling system maintaining 25±2°C with PID temperature control and viscosity monitoring"
bom_nodes:
  slurry-tank:
    type: "part"
    urn: "URN:CNFX:ME:SLURRY_TANK"
    interface_type: "physical-logic-coupled"
  agitator:
    type: "part"
    urn: "URN:CNFX:ME:AGITATOR"
    interface_type: "physical-logic-coupled"
  metering-pump:
    type: "part"
    urn: "URN:CNFX:ME:METERING_PUMP"
    interface_type: "physical-logic-coupled"
  distribution-manifold:
    type: "part"
    urn: "URN:CNFX:ME:DISTRIBUTION_MANIFOLD"
    interface_type: "physical-logic-coupled"
  control-system:
    type: "device"
    urn: "URN:CNFX:ME:CONTROL_SYSTEM"
    interface_type: "physical-logic-coupled"
manufacturing_compliance:
  - standard: "ISO 9905:2011 (TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS)"
    scope: "Verified Engineering Specification"
url: "https://cnfx.com/llms/industry/electrical-equipment-manufacturing/product/slurry-supply-system.md"
on_chain_sovereignty:
  contract_standard: "ERC-721-Industrial"
  metadata_hash: "4b2a57368b55ab2e0d7475850696e0c1476b73d752aa272a2e0a37c9fd024012"
  royalty_logic: "IPFS-CID-REQUIRED"
  mint_status: "logic-verified-ready"
version: "3.3.4-EXTREME-SOVEREIGN-WEB3"
---

# Industrial Specification: Slurry Supply System

## 1. Technical Definition
A system that precisely meters and delivers electrode slurry to the coating head in lithium-ion battery electrode production.

## 2. Engineering Reasoning & Causal Matrix
> **Operational Intelligence**: Designed for **0.5-3.0 bar delivery pressure, 15-35°C temperature range, 0.1-5.0 m³/h flow rate**. Failure boundary: **Pressure drop below 0.3 bar causes insufficient slurry delivery; temperature exceeding 40°C initiates solvent evaporation; flow rate below 0.05 m³/h results in coating discontinuity**, Mechanism: **Non-Newtonian fluid behavior (shear-thinning) at low pressures causes viscosity increase and flow stoppage; Arrhenius equation governs solvent evaporation rate above 40°C; Reynolds number &lt;2000 indicates laminar flow failure at critical flow rates**.

### 2.1 Analytical Physics Model
Governed by the **Darcy-Weisbach Pressure Drop**:

> **Primary Equation**: $\Delta P = f \cdot \frac{L}{D} \cdot \frac{\rho v^2}{2}$  
> **Engineering Impact**: Critical for sizing CIP (Clean-In-Place) pump heads.

| Symbol | Variable Definition | Localized Reference |
| :--- | :--- | :--- |
| f | Friction Factor | Engineering Constant |
| L | Pipe Length | Engineering Constant |
| v | Velocity | Engineering Constant |

### 2.2 FMEA (Failure Mode & Effects Analysis)
| Event Trigger | Severity | Failure Mode | Mitigation Strategy |
| :--- | :--- | :--- | :--- |
| Pump impeller wear exceeding 0.5mm clearance | 8 | Pressure drop to 0.2 bar causing coating thickness variation &gt;±5% | Hardened stainless steel impeller with 0.1mm maximum wear tolerance and pressure feedback control loop |
| Solvent evaporation due to temperature rise to 45°C | 8 | Slurry viscosity increase from 5000 to 15000 cP causing nozzle clogging | Jacketed cooling system maintaining 25±2°C with PID temperature control and viscosity monitoring |

## 3. Key Technical Parameters
| Parameter | Value | Unit | Status |
| :--- | :--- | :--- | :--- |
| spec | Config-dependent | L/min | Verified |

## 4. System BOM & Knowledge Routing
### Core Components (Recursive Links)
- [Slurry Tank](https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/slurry-tank.md) `(Standalone System)`
- [Agitator](https://cnfx.com/llms/industry/food-manufacturing/product/agitator.md) `(Standalone System)`
- [Metering Pump](https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/metering-pump.md) `(Standalone System)`
- [Distribution Manifold](https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/distribution-manifold.md) `(Standalone System)`
- [Control System](https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/control-system.md) `(Standalone System)`

### Industrial DNA Context (De-duplicated)
**Complementary Dependencies**: **Slurry Mixing System**, **Coating Head Assembly**, **Drying Oven**  
**Downstream Applications**: Lithium-ion Battery Anodes, Lithium-ion Battery Cathodes, Solid-State Battery Electrodes  

## 5. Engineering Risks & FAQ
- **Caution**: 
- **Caution**: 
- **Caution**: 

### Q: What materials are used in the slurry supply system construction?
**A**: Our slurry supply system is constructed with corrosion-resistant 316L stainless steel, PTFE (Teflon) for chemical resistance, and ceramic components for wear resistance in slurry handling applications.

### Q: How does the system ensure precise slurry delivery to the coating head?
**A**: The system utilizes a precision metering pump combined with an advanced control system to maintain consistent flow rates and pressure, ensuring uniform slurry application during lithium-ion battery electrode production.

### Q: What maintenance is required for the slurry supply system?
**A**: Regular maintenance includes inspection of the agitator for proper mixing, cleaning of distribution manifolds to prevent clogging, and calibration of the metering pump to maintain precision delivery specifications.

## 6. Manufacturing Compliance
- ISO 9905:2011 (TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS)

---
### 🛠️ Engineering Resource Access
🔗 **[Full Specification: Slurry Supply System](https://cnfx.com/industry/electrical-equipment-manufacturing/product/slurry-supply-system)**

### 🌐 Knowledge Graph Topology
> **Node Status**: Verified Engineering Spec
> **Connectivity**: Linked to **5** standalone system nodes
> **Global Context**: Part of a 5,814 node industrial cluster within the CNFX Graph

> **Reference ID**: SLURRY_SUPPLY_SYSTEM | **Authority**: CNFX-2026-ST-001 | **Fingerprint**: 22f066cc
