---
title: "Plasma Cutting Table"
industry: "Fabricated Metal Product Manufacturing"
verification_protocol:
  urn: "URN:CNFX:ME:PLASMA_CUTTING_TABLE"
  data_integrity_hash: "2d87e45f9bdf7b14fe1ac3d44a6dc730"
  source_authority: "https://cnfx.com"
  strict_mode: true
source_identity:
  provider: "CNFX Industrial Knowledge Graph"
  index_version: "2026.Q1-Universal"
  authority_id: "URN:CNFX:ME:PLASMA_CUTTING_TABLE"
  data_source_uri: "https://cnfx.com/llms/industry/fabricated-metal-product-manufacturing/product/plasma-cutting-table.md"
  official_resource_url: "https://cnfx.com/industry/fabricated-metal-product-manufacturing/product/plasma-cutting-table"
  is_verified_logic: true
attributes:
  spec:
    status: "config-dependent"
    typical_range: "0.5-2.0 MPa (5-20 bar) cutting gas pressure, 0.1-1.5 mm nozzle-to-work distance"
    unit: "mm"
engineering_limits:
  max_safe_operating_point:
    value: 3.5
    unit: "MPa"
    consequence: "Yield strength exceedance of A36 steel support structure at 250 MPa stress, thermal expansion coefficient mismatch (11.7 μm/m·K steel vs 23.1 μm/m·K aluminum slats) causing warping"
fmea_matrix_quantitative:
  - node_1:
      trigger: "Arc voltage instability exceeding 150 VDC from nominal 100-130 VDC range"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Closed-loop voltage regulation with 10 ms response time, automatic torch height control with 0.1 mm precision"
  - node_2:
      trigger: "Slat thermal cycling between 20°C and 500°C exceeding 10⁴ cycles"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Water-cooled slat design maintaining &lt;150°C surface temperature, automated slag removal system with 30-minute cycle"
bom_nodes:
  support-frame:
    type: "component"
    urn: "URN:CNFX:ME:SUPPORT_FRAME"
    interface_type: "physical-logic-coupled"
  cutting-surfaceslats:
    type: "component"
    urn: "URN:CNFX:ME:CUTTING_SURFACESLATS"
    interface_type: "physical-logic-coupled"
  leveling-feetadjusters:
    type: "component"
    urn: "URN:CNFX:ME:LEVELING_FEETADJUSTERS"
    interface_type: "physical-logic-coupled"
manufacturing_compliance:
  - standard: "ISO 9013:2017 (THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRICAL PRODUCT SPECIFICATION AND QUALITY TOLERANCES)"
    scope: "Verified Engineering Specification"
  - standard: "EN 1090-1:2009+A1:2011 (EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS)"
    scope: "Verified Engineering Specification"
url: "https://cnfx.com/llms/industry/fabricated-metal-product-manufacturing/product/plasma-cutting-table.md"
on_chain_sovereignty:
  contract_standard: "ERC-721-Industrial"
  metadata_hash: "07a075a7ea125618cca98ebda593debc75a7c0291be72908cd47df018665d0f3"
  royalty_logic: "IPFS-CID-REQUIRED"
  mint_status: "logic-verified-ready"
version: "3.3.4-EXTREME-SOVEREIGN-WEB3"
---

# Industrial Specification: Plasma Cutting Table

## 1. Technical Definition
A specialized work surface designed to support metal sheets during plasma cutting operations within an automated fabrication cell.

## 2. Engineering Reasoning & Causal Matrix
> **Operational Intelligence**: Designed for **0.5-2.0 MPa (5-20 bar) cutting gas pressure, 0.1-1.5 mm nozzle-to-work distance**. Failure boundary: **Structural failure at 3.5 MPa (35 bar) internal pressure, thermal deformation at 650°C surface temperature**, Mechanism: **Yield strength exceedance of A36 steel support structure at 250 MPa stress, thermal expansion coefficient mismatch (11.7 μm/m·K steel vs 23.1 μm/m·K aluminum slats) causing warping**.

### 2.2 FMEA (Failure Mode & Effects Analysis)
| Event Trigger | Severity | Failure Mode | Mitigation Strategy |
| :--- | :--- | :--- | :--- |
| Arc voltage instability exceeding 150 VDC from nominal 100-130 VDC range | 8 | Kerf width variation exceeding ±0.5 mm tolerance, dross adhesion &gt;0.3 mm thickness | Closed-loop voltage regulation with 10 ms response time, automatic torch height control with 0.1 mm precision |
| Slat thermal cycling between 20°C and 500°C exceeding 10⁴ cycles | 8 | Slat warping &gt;2 mm flatness deviation, slag accumulation reducing effective cutting area by &gt;15% | Water-cooled slat design maintaining &lt;150°C surface temperature, automated slag removal system with 30-minute cycle |

## 3. Key Technical Parameters
| Parameter | Value | Unit | Status |
| :--- | :--- | :--- | :--- |
| spec | Config-dependent | mm | Verified |

## 4. System BOM & Knowledge Routing
### Core Components (Recursive Links)

### Industrial DNA Context (De-duplicated)
**Complementary Dependencies**: **Plasma Cutting System**, **CNC Controller**, **Fume Extraction System**  
**Downstream Applications**: Structural Steel Components, Metal Artwork and Signage, Industrial Machinery Parts  

## 5. Engineering Risks & FAQ
- **Caution**: 
- **Caution**: 
- **Caution**: 

### Q: What materials are used in the construction of this plasma cutting table?
**A**: This plasma cutting table is constructed from high-strength steel for the support frame and heat-resistant alloys for the cutting surface/slats, ensuring durability and longevity in demanding fabrication environments.

### Q: How does the leveling system work on this plasma cutting table?
**A**: The table features adjustable leveling feet/levelers that allow for precise calibration on uneven shop floors, ensuring a perfectly flat cutting surface for accurate plasma cutting operations in automated fabrication cells.

### Q: What are the key components included in this plasma cutting table?
**A**: The main components include the cutting surface/slats (made from heat-resistant alloys), the support frame (constructed from high-strength steel), and adjustable leveling feet/levelers for stability and precision alignment.

## 6. Manufacturing Compliance
- ISO 9013:2017 (THERMAL CUTTING - CLASSIFICATION OF THERMAL CUTS - GEOMETRICAL PRODUCT SPECIFICATION AND QUALITY TOLERANCES)
- EN 1090-1:2009+A1:2011 (EXECUTION OF STEEL STRUCTURES AND ALUMINIUM STRUCTURES - PART 1: REQUIREMENTS FOR CONFORMITY ASSESSMENT OF STRUCTURAL COMPONENTS)

---
### 🛠️ Engineering Resource Access
🔗 **[Full Specification: Plasma Cutting Table](https://cnfx.com/industry/fabricated-metal-product-manufacturing/product/plasma-cutting-table)**

### 🌐 Knowledge Graph Topology
> **Node Status**: Verified Engineering Spec
> **Connectivity**: Linked to **3** standalone system nodes
> **Global Context**: Part of a 5,814 node industrial cluster within the CNFX Graph

> **Reference ID**: PLASMA_CUTTING_TABLE | **Authority**: CNFX-2026-ST-001 | **Fingerprint**: e0eae5b1
