---
title: "Blade Holder / Frame"
industry: "Food Manufacturing"
verification_protocol:
  urn: "URN:CNFX:ME:BLADE_HOLDER_FRAME"
  data_integrity_hash: "39c02025cb4c0fd2a17e8fb62b85573d"
  source_authority: "https://cnfx.com"
  strict_mode: true
source_identity:
  provider: "CNFX Industrial Knowledge Graph"
  index_version: "2026.Q1-Universal"
  authority_id: "URN:CNFX:ME:BLADE_HOLDER_FRAME"
  data_source_uri: "https://cnfx.com/llms/industry/food-manufacturing/product/blade-holder-frame.md"
  official_resource_url: "https://cnfx.com/industry/food-manufacturing/product/blade-holder-frame"
  is_verified_logic: true
attributes:
  spec:
    status: "config-dependent"
    typical_range: "0-150 N·m torque, 0-25 MPa clamping pressure, -20°C to 120°C temperature"
    unit: "mm"
engineering_limits:
  max_safe_operating_point:
    value: 250
    unit: "MPa"
    consequence: "High-cycle fatigue from 10⁶+ cyclic loads at 0.3 Hz, stress concentration at fillet radii below 1.5 mm, fretting wear at blade-contact interfaces exceeding 50 μm clearance"
fmea_matrix_quantitative:
  - node_1:
      trigger: "Misalignment exceeding 0.1 mm/mm over 300 mm span"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Integrate laser-alignment guides with 0.01 mm precision and automated shimming system"
  - node_2:
      trigger: "Material fatigue from 316L stainless steel exceeding 10⁷ cycles at 200 MPa alternating stress"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Implement shot peening to induce 400 MPa compressive residual stress and ultrasonic inspection at 5 MHz frequency"
bom_nodes:
  mounting-brackets:
    type: "component"
    urn: "URN:CNFX:ME:MOUNTING_BRACKETS"
    interface_type: "physical-logic-coupled"
  reinforcement-ribs:
    type: "component"
    urn: "URN:CNFX:ME:REINFORCEMENT_RIBS"
    interface_type: "physical-logic-coupled"
  alignment-pins:
    type: "component"
    urn: "URN:CNFX:ME:ALIGNMENT_PINS"
    interface_type: "physical-logic-coupled"
manufacturing_compliance:
url: "https://cnfx.com/llms/industry/food-manufacturing/product/blade-holder-frame.md"
on_chain_sovereignty:
  contract_standard: "ERC-721-Industrial"
  metadata_hash: "070c199f4f02fcd96d173bb32e95082e7aef9ab62fda5506560f9c00b9a9511f"
  royalty_logic: "IPFS-CID-REQUIRED"
  mint_status: "logic-verified-ready"
version: "3.3.4-EXTREME-SOVEREIGN-WEB3"
---

# Industrial Specification: Blade Holder / Frame

## 1. Technical Definition
Structural component that securely positions and supports cutting blades within an industrial dough divider assembly.

## 2. Engineering Reasoning & Causal Matrix
> **Operational Intelligence**: Designed for **0-150 N·m torque, 0-25 MPa clamping pressure, -20°C to 120°C temperature**. Failure boundary: **Yield at 250 MPa von Mises stress, 0.5 mm permanent deformation, 180 N·m torsional failure**, Mechanism: **High-cycle fatigue from 10⁶+ cyclic loads at 0.3 Hz, stress concentration at fillet radii below 1.5 mm, fretting wear at blade-contact interfaces exceeding 50 μm clearance**.

### 2.2 FMEA (Failure Mode & Effects Analysis)
| Event Trigger | Severity | Failure Mode | Mitigation Strategy |
| :--- | :--- | :--- | :--- |
| Misalignment exceeding 0.1 mm/mm over 300 mm span | 8 | Progressive blade wobble leading to 15% dough weight variance | Integrate laser-alignment guides with 0.01 mm precision and automated shimming system |
| Material fatigue from 316L stainless steel exceeding 10⁷ cycles at 200 MPa alternating stress | 8 | Crack initiation at stress-concentrated mounting holes causing catastrophic frame fracture | Implement shot peening to induce 400 MPa compressive residual stress and ultrasonic inspection at 5 MHz frequency |

## 3. Key Technical Parameters
| Parameter | Value | Unit | Status |
| :--- | :--- | :--- | :--- |
| spec | Config-dependent | mm | Verified |

## 4. System BOM & Knowledge Routing
### Core Components (Recursive Links)

### Industrial DNA Context (De-duplicated)
**Complementary Dependencies**: **Industrial Dough Divider**, **Conveyor System**, **Dough Sheeter**  
**Downstream Applications**: Bread Rolls, Pizza Dough Portions, Pastry Sheets  

## 5. Engineering Risks & FAQ
- **Caution**: 
- **Caution**: 
- **Caution**: 

### Q: What materials are used in this blade holder/frame for food manufacturing?
**A**: This blade holder/frame is constructed from food-grade stainless steel, ensuring durability, corrosion resistance, and compliance with hygiene standards in food processing environments.

### Q: How does this component secure cutting blades in a dough divider?
**A**: The frame uses precision alignment pins and mounting brackets to position blades accurately, while reinforcement ribs provide structural stability during high-volume dough dividing operations.

### Q: Is this blade holder compatible with different industrial dough divider models?
**A**: While designed as a structural component for standard industrial dough dividers, compatibility depends on specific machine specifications. Consult manufacturer guidelines or provide your equipment model for verification.

## 6. Manufacturing Compliance

---
### 🛠️ Engineering Resource Access
🔗 **[Full Specification: Blade Holder / Frame](https://cnfx.com/industry/food-manufacturing/product/blade-holder-frame)**

### 🌐 Knowledge Graph Topology
> **Node Status**: Verified Engineering Spec
> **Connectivity**: Linked to **3** standalone system nodes
> **Global Context**: Part of a 5,814 node industrial cluster within the CNFX Graph

> **Reference ID**: BLADE_HOLDER_FRAME | **Authority**: CNFX-2026-ST-001 | **Fingerprint**: 7af46c3e
