---
title: "Spray Ball Head"
industry: "Food Manufacturing"
verification_protocol:
  urn: "URN:CNFX:ME:SPRAY_BALL_HEAD"
  data_integrity_hash: "8c917a9a2bdbdac23c220486fd2ff72b"
  source_authority: "https://cnfx.com"
  strict_mode: true
source_identity:
  provider: "CNFX Industrial Knowledge Graph"
  index_version: "2026.Q1-Universal"
  authority_id: "URN:CNFX:ME:SPRAY_BALL_HEAD"
  data_source_uri: "https://cnfx.com/llms/industry/food-manufacturing/product/spray-ball-head.md"
  official_resource_url: "https://cnfx.com/industry/food-manufacturing/product/spray-ball-head"
  is_verified_logic: true
attributes:
  spec:
    status: "config-dependent"
    typical_range: "2.0-6.0 bar (29-87 psi) at 15-60°C fluid temperature"
    unit: "mm"
engineering_limits:
  max_safe_operating_point:
    value: 8.5
    unit: "bar"
    consequence: "Plastic deformation of 316L stainless steel due to hoop stress exceeding yield strength (290 MPa) at 8.5 bar internal pressure in thin-walled nozzle sections (1.5mm thickness)"
fmea_matrix_quantitative:
  - node_1:
      trigger: "Abrasive particle accumulation (≥50μm silica) in fluid stream"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Install 20μm absolute filtration upstream with differential pressure monitoring (ΔP &gt; 0.5 bar triggers maintenance)"
  - node_2:
      trigger: "Water hammer pressure surge (≥15 bar/ms rise time) during valve closure"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Install surge arrestor with 10ms response time and torque limiter set to 40 N·m"
bom_nodes:
  nozzle-plate:
    type: "part"
    urn: "URN:CNFX:ME:NOZZLE_PLATE"
    interface_type: "physical-logic-coupled"
  rotation-bearing:
    type: "component"
    urn: "URN:CNFX:ME:ROTATION_BEARING"
    interface_type: "physical-logic-coupled"
  mounting-flange:
    type: "component"
    urn: "URN:CNFX:ME:MOUNTING_FLANGE"
    interface_type: "physical-logic-coupled"
manufacturing_compliance:
  - standard: "ISO 2852:2007 (STAINLESS STEEL CLAMP OR COUPLING-TYPE FITTINGS FOR THE FOOD INDUSTRY)"
    scope: "Verified Engineering Specification"
url: "https://cnfx.com/llms/industry/food-manufacturing/product/spray-ball-head.md"
on_chain_sovereignty:
  contract_standard: "ERC-721-Industrial"
  metadata_hash: "92db6f54e20d0aab447c7b0e10bdf843aa5002d87d74302aff03ccfd35400196"
  royalty_logic: "IPFS-CID-REQUIRED"
  mint_status: "logic-verified-ready"
version: "3.3.4-EXTREME-SOVEREIGN-WEB3"
---

# Industrial Specification: Spray Ball Head

## 1. Technical Definition
The rotating nozzle assembly that distributes cleaning fluid in a CIP spray ball system

## 2. Engineering Reasoning & Causal Matrix
> **Operational Intelligence**: Designed for **2.0-6.0 bar (29-87 psi) at 15-60°C fluid temperature**. Failure boundary: **8.5 bar (123 psi) internal pressure causing permanent deformation of nozzle orifice geometry beyond 0.1mm tolerance**, Mechanism: **Plastic deformation of 316L stainless steel due to hoop stress exceeding yield strength (290 MPa) at 8.5 bar internal pressure in thin-walled nozzle sections (1.5mm thickness)**.

### 2.1 Analytical Physics Model
Governed by the **Darcy-Weisbach Pressure Drop**:

> **Primary Equation**: $\Delta P = f \cdot \frac{L}{D} \cdot \frac{\rho v^2}{2}$  
> **Engineering Impact**: Critical for sizing CIP (Clean-In-Place) pump heads.

| Symbol | Variable Definition | Localized Reference |
| :--- | :--- | :--- |
| f | Friction Factor | Engineering Constant |
| L | Pipe Length | Engineering Constant |
| v | Velocity | Engineering Constant |

### 2.2 FMEA (Failure Mode & Effects Analysis)
| Event Trigger | Severity | Failure Mode | Mitigation Strategy |
| :--- | :--- | :--- | :--- |
| Abrasive particle accumulation (≥50μm silica) in fluid stream | 8 | Nozzle orifice erosion increasing diameter from 3.0mm to 3.8mm over 200 cycles | Install 20μm absolute filtration upstream with differential pressure monitoring (ΔP &gt; 0.5 bar triggers maintenance) |
| Water hammer pressure surge (≥15 bar/ms rise time) during valve closure | 8 | Bearing race fracture in rotation mechanism due to instantaneous torque &gt; 45 N·m | Install surge arrestor with 10ms response time and torque limiter set to 40 N·m |

## 3. Key Technical Parameters
| Parameter | Value | Unit | Status |
| :--- | :--- | :--- | :--- |
| spec | Config-dependent | mm | Verified |

## 4. System BOM & Knowledge Routing
### Core Components (Recursive Links)
- [Nozzle Plate](https://cnfx.com/llms/industry/printing-and-reproduction-of-recorded-media/product/nozzle-plate.md) `(Standalone System)`

### Industrial DNA Context (De-duplicated)
**Complementary Dependencies**: **CIP Pump**, **Chemical Dosing System**, **Process Control Panel**  
**Downstream Applications**: Cleaned Tanks, Sanitized Processing Vessels, Hygienic Food Contact Surfaces  

## 5. Engineering Risks & FAQ
- **Caution**: 
- **Caution**: 
- **Caution**: 

### Q: What makes this spray ball head suitable for food manufacturing?
**A**: Made from Stainless Steel 316L, it meets food-grade sanitary standards, resists corrosion from cleaning chemicals, and ensures hygienic cleaning in CIP systems.

### Q: How does the rotating nozzle assembly improve cleaning?
**A**: The rotation distributes cleaning fluid evenly across tank surfaces, eliminating dead zones and ensuring thorough coverage for effective sanitation.

### Q: What maintenance does the spray ball head require?
**A**: Regular inspection of the rotation bearing and nozzle plate for wear, along with routine cleaning to prevent clogging, ensures optimal performance and longevity.

## 6. Manufacturing Compliance
- ISO 2852:2007 (STAINLESS STEEL CLAMP OR COUPLING-TYPE FITTINGS FOR THE FOOD INDUSTRY)

---
### 🛠️ Engineering Resource Access
🔗 **[Full Specification: Spray Ball Head](https://cnfx.com/industry/food-manufacturing/product/spray-ball-head)**

### 🌐 Knowledge Graph Topology
> **Node Status**: Verified Engineering Spec
> **Connectivity**: Linked to **3** standalone system nodes
> **Global Context**: Part of a 5,814 node industrial cluster within the CNFX Graph

> **Reference ID**: SPRAY_BALL_HEAD | **Authority**: CNFX-2026-ST-001 | **Fingerprint**: 59c50327
