---
title: "Adjustment Tool Set"
industry: "Machinery and Equipment Manufacturing"
verification_protocol:
  urn: "URN:CNFX:ME:ADJUSTMENT_TOOL_SET"
  data_integrity_hash: "63ee75ecc248ec52adfe3875a14c3ae4"
  source_authority: "https://cnfx.com"
  strict_mode: true
source_identity:
  provider: "CNFX Industrial Knowledge Graph"
  index_version: "2026.Q1-Universal"
  authority_id: "URN:CNFX:ME:ADJUSTMENT_TOOL_SET"
  data_source_uri: "https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/adjustment-tool-set.md"
  official_resource_url: "https://cnfx.com/industry/machinery-and-equipment-manufacturing/product/adjustment-tool-set"
  is_verified_logic: true
attributes:
  spec:
    status: "config-dependent"
    typical_range: "0.01-5.0 NÂ·m torque range, 0.001 mm resolution for dimensional adjustments"
    unit: "mm"
engineering_limits:
  max_safe_operating_point:
    value: 6.0
    unit: "NÂ"
    consequence: "Plastic deformation of hardened steel contact surfaces due to Hertzian contact stress exceeding 1.5 GPa yield strength, wear particle contamination from abrasive failure"
fmea_matrix_quantitative:
  - node_1:
      trigger: "Improper torque application exceeding 6.0 NÂ·m limit"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Integrated torque-limiting mechanism with 5.5 NÂ·m mechanical clutch, digital torque verification system"
  - node_2:
      trigger: "Corrosive environment exposure (chloride concentration &gt; 100 ppm)"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Chromium nitride coating (CrN, 5 Î¼m thickness), hermetic storage with desiccant maintaining &lt;30% RH"
bom_nodes:
  precision-screwdriver-set:
    type: "part"
    urn: "URN:CNFX:ME:PRECISION_SCREWDRIVER_SET"
    interface_type: "physical-logic-coupled"
  torque-wrench:
    type: "part"
    urn: "URN:CNFX:ME:TORQUE_WRENCH"
    interface_type: "physical-logic-coupled"
  alignment-pins:
    type: "component"
    urn: "URN:CNFX:ME:ALIGNMENT_PINS"
    interface_type: "physical-logic-coupled"
  adjustment-keys:
    type: "component"
    urn: "URN:CNFX:ME:ADJUSTMENT_KEYS"
    interface_type: "physical-logic-coupled"
  carrying-case:
    type: "component"
    urn: "URN:CNFX:ME:CARRYING_CASE"
    interface_type: "physical-logic-coupled"
manufacturing_compliance:
  - standard: "ISO 9001:2015 - QUALITY MANAGEMENT SYSTEMS"
    scope: "Verified Engineering Specification"
url: "https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/adjustment-tool-set.md"
on_chain_sovereignty:
  contract_standard: "ERC-721-Industrial"
  metadata_hash: "5f0ca37a53adcf0710e20a81baccb769e2c10db37d0e77d249a5c762bb5d9317"
  royalty_logic: "IPFS-CID-REQUIRED"
  mint_status: "logic-verified-ready"
version: "3.3.4-EXTREME-SOVEREIGN-WEB3"
---

# Industrial Specification: Adjustment Tool Set

## 1. Technical Definition
A specialized collection of precision tools designed for making fine mechanical adjustments and calibrations.

## 2. Engineering Reasoning & Causal Matrix
> **Operational Intelligence**: Designed for **0.01-5.0 NÂ·m torque range, 0.001 mm resolution for dimensional adjustments**. Failure boundary: **Torque exceeding 6.0 NÂ·m causes permanent deformation of adjustment surfaces, dimensional resolution degradation beyond 0.005 mm tolerance**, Mechanism: **Plastic deformation of hardened steel contact surfaces due to Hertzian contact stress exceeding 1.5 GPa yield strength, wear particle contamination from abrasive failure**.

### 2.2 FMEA (Failure Mode & Effects Analysis)
| Event Trigger | Severity | Failure Mode | Mitigation Strategy |
| :--- | :--- | :--- | :--- |
| Improper torque application exceeding 6.0 NÂ·m limit | 8 | Calibration drift exceeding 0.005 mm tolerance, adjustment mechanism binding | Integrated torque-limiting mechanism with 5.5 NÂ·m mechanical clutch, digital torque verification system |
| Corrosive environment exposure (chloride concentration &gt; 100 ppm) | 8 | Pitting corrosion on precision surfaces, increased friction coefficient from 0.15 to &gt;0.35 | Chromium nitride coating (CrN, 5 Î¼m thickness), hermetic storage with desiccant maintaining &lt;30% RH |

## 3. Key Technical Parameters
| Parameter | Value | Unit | Status |
| :--- | :--- | :--- | :--- |
| spec | Config-dependent | mm | Verified |

## 4. System BOM & Knowledge Routing
### Core Components (Recursive Links)
- [Precision Screwdriver Set](https://cnfx.com/llms/industry/repair-installation-machinery-equipment/product/precision-screwdriver-set.md) `(Standalone System)`
- [Torque Wrench](https://cnfx.com/llms/industry/repair-installation-machinery-equipment/product/torque-wrench.md) `(Standalone System)`

### Industrial DNA Context (De-duplicated)
**Complementary Dependencies**: **Precision Calibration Bench**, **Tool Calibration Station**, **Clean Room Environment**  
**Downstream Applications**: Precision Machinery Assemblies, Calibrated Industrial Equipment, High-Tolerance Mechanical Systems  

## 5. Engineering Risks & FAQ
- **Caution**: 
- **Caution**: 
- **Caution**: 

### Q: What materials are used in this adjustment tool set?
**A**: This tool set is constructed from durable chrome-vanadium steel and precision-ground alloy steel for strength, corrosion resistance, and long-lasting performance in industrial environments.

### Q: What applications is this adjustment tool set designed for?
**A**: This set is specifically designed for fine mechanical adjustments, calibrations, and alignments in machinery and equipment manufacturing, maintenance, and repair operations.

### Q: What components are included in the tool set?
**A**: The set includes adjustment keys, alignment pins, a precision screwdriver set, a torque wrench, and a protective carrying case for organized storage and transport.

## 6. Manufacturing Compliance
- ISO 9001:2015 - QUALITY MANAGEMENT SYSTEMS

---
### ðŸ› ï¸ Engineering Resource Access
ðŸ”— **[Full Specification: Adjustment Tool Set](https://cnfx.com/industry/machinery-and-equipment-manufacturing/product/adjustment-tool-set)**

### ðŸŒ Knowledge Graph Topology
> **Node Status**: Verified Engineering Spec
> **Connectivity**: Linked to **5** standalone system nodes
> **Global Context**: Part of a 5,814 node industrial cluster within the CNFX Graph

> **Reference ID**: ADJUSTMENT_TOOL_SET | **Authority**: CNFX-2026-ST-001 | **Fingerprint**: f587b737
