---
title: "Blade Holder/Assembly"
industry: "Machinery and Equipment Manufacturing"
verification_protocol:
  urn: "URN:CNFX:ME:BLADE_HOLDERASSEMBLY"
  data_integrity_hash: "f77015a193d018da91bd74a4c5ee6b9c"
  source_authority: "https://cnfx.com"
  strict_mode: true
source_identity:
  provider: "CNFX Industrial Knowledge Graph"
  index_version: "2026.Q1-Universal"
  authority_id: "URN:CNFX:ME:BLADE_HOLDERASSEMBLY"
  data_source_uri: "https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/blade-holderassembly.md"
  official_resource_url: "https://cnfx.com/industry/machinery-and-equipment-manufacturing/product/blade-holderassembly"
  is_verified_logic: true
attributes:
  spec:
    status: "config-dependent"
    typical_range: "0.5-2.5 kN clamping force, 0.01-0.05 mm positional tolerance, -20°C to 150°C temperature range"
    unit: "mm"
engineering_limits:
  max_safe_operating_point:
    value: 0.3
    unit: "kN"
    consequence: "Stress concentration at bolt interfaces exceeding 350 MPa yield strength (ASTM A36 steel), thermal expansion mismatch (α=11.7×10⁻⁶/°C steel vs α=23×10⁻⁶/°C aluminum), fretting wear at blade contact surfaces"
fmea_matrix_quantitative:
  - node_1:
      trigger: "Cyclic loading at 15-25 Hz resonance frequency"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Implement fillet radii ≥3 mm at stress concentration points, use shot peening to induce 200-300 MPa compressive residual stress"
  - node_2:
      trigger: "Thermal gradient of 80°C across dissimilar metals"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Incorporate Invar 36 inserts (α=1.2×10⁻⁶/°C) at critical interfaces, apply thermal barrier coating with 0.8 W/m·K conductivity"
bom_nodes:
  clamping-plate:
    type: "component"
    urn: "URN:CNFX:ME:CLAMPING_PLATE"
    interface_type: "physical-logic-coupled"
  base-plate:
    type: "component"
    urn: "URN:CNFX:ME:BASE_PLATE"
    interface_type: "physical-logic-coupled"
  clamping-boltsscrews:
    type: "component"
    urn: "URN:CNFX:ME:CLAMPING_BOLTSSCREWS"
    interface_type: "physical-logic-coupled"
  alignment-pinsguides:
    type: "component"
    urn: "URN:CNFX:ME:ALIGNMENT_PINSGUIDES"
    interface_type: "physical-logic-coupled"
manufacturing_compliance:
  - standard: "ISO 9001:2015 - QUALITY MANAGEMENT SYSTEMS"
    scope: "Verified Engineering Specification"
url: "https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/blade-holderassembly.md"
on_chain_sovereignty:
  contract_standard: "ERC-721-Industrial"
  metadata_hash: "95052152524b82ea27a1d938a769b543d35581b9b11a6eab94354bb5edeb7ee6"
  royalty_logic: "IPFS-CID-REQUIRED"
  mint_status: "logic-verified-ready"
version: "3.3.4-EXTREME-SOVEREIGN-WEB3"
---

# Industrial Specification: Blade Holder/Assembly

## 1. Technical Definition
A mechanical assembly that securely positions and holds the cutting blade within a precision shear system.

## 2. Engineering Reasoning & Causal Matrix
> **Operational Intelligence**: Designed for **0.5-2.5 kN clamping force, 0.01-0.05 mm positional tolerance, -20°C to 150°C temperature range**. Failure boundary: **Clamping force drops below 0.3 kN, positional deviation exceeds 0.08 mm, temperature exceeds 180°C**, Mechanism: **Stress concentration at bolt interfaces exceeding 350 MPa yield strength (ASTM A36 steel), thermal expansion mismatch (α=11.7×10⁻⁶/°C steel vs α=23×10⁻⁶/°C aluminum), fretting wear at blade contact surfaces**.

### 2.1 Analytical Physics Model
Governed by the **Frame Structural Deflection Analysis**:

> **Primary Equation**: $\delta = \frac{5 q L^4}{384 E I}$  
> **Engineering Impact**: Ensures structural stability for multi-stage machines.

| Symbol | Variable Definition | Localized Reference |
| :--- | :--- | :--- |
| q | Uniform Load | Engineering Constant |
| E | Elastic Modulus | Engineering Constant |
| I | Moment of Inertia | Engineering Constant |

### 2.2 FMEA (Failure Mode & Effects Analysis)
| Event Trigger | Severity | Failure Mode | Mitigation Strategy |
| :--- | :--- | :--- | :--- |
| Cyclic loading at 15-25 Hz resonance frequency | 8 | Fatigue crack propagation from bolt holes | Implement fillet radii ≥3 mm at stress concentration points, use shot peening to induce 200-300 MPa compressive residual stress |
| Thermal gradient of 80°C across dissimilar metals | 8 | Differential expansion causing 0.12 mm misalignment | Incorporate Invar 36 inserts (α=1.2×10⁻⁶/°C) at critical interfaces, apply thermal barrier coating with 0.8 W/m·K conductivity |

## 3. Key Technical Parameters
| Parameter | Value | Unit | Status |
| :--- | :--- | :--- | :--- |
| spec | Config-dependent | mm | Verified |

## 4. System BOM & Knowledge Routing
### Core Components (Recursive Links)

### Industrial DNA Context (De-duplicated)
**Complementary Dependencies**: **Hydraulic Power Unit**, **CNC Control System**, **Coolant Filtration System**  
**Downstream Applications**: Precision Metal Sheets, Automotive Body Panels, Aerospace Structural Components  

## 5. Engineering Risks & FAQ
- **Caution**: 
- **Caution**: 
- **Caution**: 

### Q: What materials are used in this blade holder assembly?
**A**: This blade holder assembly is constructed from tool steel, hardened steel, and precision-machined aluminum alloy components for durability and precision.

### Q: How does this assembly ensure blade stability in shear systems?
**A**: The assembly uses clamping plates, alignment pins/guides, and secure bolting to maintain precise blade positioning and prevent movement during cutting operations.

### Q: What maintenance is required for this blade holder assembly?
**A**: Regular inspection of clamping components and alignment guides, along with proper lubrication of moving parts, ensures optimal performance and longevity.

## 6. Manufacturing Compliance
- ISO 9001:2015 - QUALITY MANAGEMENT SYSTEMS

---
### 🛠️ Engineering Resource Access
🔗 **[Full Specification: Blade Holder/Assembly](https://cnfx.com/industry/machinery-and-equipment-manufacturing/product/blade-holderassembly)**

### 🌐 Knowledge Graph Topology
> **Node Status**: Verified Engineering Spec
> **Connectivity**: Linked to **4** standalone system nodes
> **Global Context**: Part of a 5,814 node industrial cluster within the CNFX Graph

> **Reference ID**: BLADE_HOLDERASSEMBLY | **Authority**: CNFX-2026-ST-001 | **Fingerprint**: 41a0e5fe
