---
title: "Control Cabling/Hose Carrier"
industry: "Machinery and Equipment Manufacturing"
verification_protocol:
  urn: "URN:CNFX:ME:CONTROL_CABLINGHOSE_CARRIER"
  data_integrity_hash: "71ba594f2c0d7793691a2fccc1128879"
  source_authority: "https://cnfx.com"
  strict_mode: true
source_identity:
  provider: "CNFX Industrial Knowledge Graph"
  index_version: "2026.Q1-Universal"
  authority_id: "URN:CNFX:ME:CONTROL_CABLINGHOSE_CARRIER"
  data_source_uri: "https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/control-cablinghose-carrier.md"
  official_resource_url: "https://cnfx.com/industry/machinery-and-equipment-manufacturing/product/control-cablinghose-carrier"
  is_verified_logic: true
attributes:
  spec:
    status: "config-dependent"
    typical_range: "0-150 N tensile load, -40°C to 120°C temperature, 0-1000 mm/s linear velocity"
    unit: "mm"
engineering_limits:
  max_safe_operating_point:
    value: 180
    unit: "N"
    consequence: "Polymer chain scission at 150°C (glass transition temperature exceeded), yield point plastic deformation at 180 N tensile load (Hooke's Law elastic limit violation), structural resonance at 1200 mm/s (natural frequency excitation)"
fmea_matrix_quantitative:
  - node_1:
      trigger: "Abrasive particulate contamination (ISO 4406 Class 21/19/16)"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "IP67-rated sealed carrier with 0.5 μm filtration at entry points"
  - node_2:
      trigger: "Cyclic bending stress exceeding 10⁶ cycles at 90° bend radius"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Carbon fiber reinforced polymer construction with 5 mm minimum bend radius"
bom_nodes:
  chain-link:
    type: "component"
    urn: "URN:CNFX:ME:CHAIN_LINK"
    interface_type: "physical-logic-coupled"
  separator:
    type: "component"
    urn: "URN:CNFX:ME:SEPARATOR"
    interface_type: "physical-logic-coupled"
  end-connector:
    type: "component"
    urn: "URN:CNFX:ME:END_CONNECTOR"
    interface_type: "physical-logic-coupled"
manufacturing_compliance:
  - standard: "ISO 12100:2010 - SAFETY OF MACHINERY"
    scope: "Verified Engineering Specification"
  - standard: "CE MARKING - MACHINERY DIRECTIVE 2006/42/EC"
    scope: "Verified Engineering Specification"
url: "https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/control-cablinghose-carrier.md"
on_chain_sovereignty:
  contract_standard: "ERC-721-Industrial"
  metadata_hash: "86056e744b68132bfc87d9db936474ed4fb0c9dc320046b675c289788b474d9c"
  royalty_logic: "IPFS-CID-REQUIRED"
  mint_status: "logic-verified-ready"
version: "3.3.4-EXTREME-SOVEREIGN-WEB3"
---

# Industrial Specification: Control Cabling/Hose Carrier

## 1. Technical Definition
A protective carrier system that organizes and guides control cables and hoses on a spray manipulator.

## 2. Engineering Reasoning & Causal Matrix
> **Operational Intelligence**: Designed for **0-150 N tensile load, -40°C to 120°C temperature, 0-1000 mm/s linear velocity**. Failure boundary: **Tensile load exceeding 180 N causes permanent deformation, temperature exceeding 150°C degrades polymer chains, velocity exceeding 1200 mm/s induces harmonic resonance**, Mechanism: **Polymer chain scission at 150°C (glass transition temperature exceeded), yield point plastic deformation at 180 N tensile load (Hooke's Law elastic limit violation), structural resonance at 1200 mm/s (natural frequency excitation)**.

### 2.2 FMEA (Failure Mode & Effects Analysis)
| Event Trigger | Severity | Failure Mode | Mitigation Strategy |
| :--- | :--- | :--- | :--- |
| Abrasive particulate contamination (ISO 4406 Class 21/19/16) | 8 | Cable insulation wear-through causing short circuit | IP67-rated sealed carrier with 0.5 μm filtration at entry points |
| Cyclic bending stress exceeding 10⁶ cycles at 90° bend radius | 8 | Polymer fatigue cracking at hinge points | Carbon fiber reinforced polymer construction with 5 mm minimum bend radius |

## 3. Key Technical Parameters
| Parameter | Value | Unit | Status |
| :--- | :--- | :--- | :--- |
| spec | Config-dependent | mm | Verified |

## 4. System BOM & Knowledge Routing
### Core Components (Recursive Links)

### Industrial DNA Context (De-duplicated)
**Complementary Dependencies**: **Cable Crimping Machine**, **Hose Assembly Station**, **Cable Testing Equipment**  
**Downstream Applications**: Industrial Spray Manipulators, Automated Painting Systems, Robotic Welding Cells  

## 5. Engineering Risks & FAQ
- **Caution**: 
- **Caution**: 
- **Caution**: 

### Q: What materials are used in this control cabling/hose carrier?
**A**: This carrier is constructed from durable engineering plastics like Nylon or POM for flexibility and corrosion resistance, combined with galvanized steel components for structural strength in industrial environments.

### Q: How does this carrier system protect cables and hoses on spray manipulators?
**A**: The carrier organizes and guides control cables and hoses within a protective enclosure, preventing tangling, abrasion, and damage from external elements while maintaining proper bend radius during manipulator movement.

### Q: What are the main components included in this hose carrier system?
**A**: The system includes chain links for the main structure, end connectors for secure attachment to machinery, and separators to organize and compartmentalize different cables and hoses within the carrier.

## 6. Manufacturing Compliance
- ISO 12100:2010 - SAFETY OF MACHINERY
- CE MARKING - MACHINERY DIRECTIVE 2006/42/EC

---
### 🛠️ Engineering Resource Access
🔗 **[Full Specification: Control Cabling/Hose Carrier](https://cnfx.com/industry/machinery-and-equipment-manufacturing/product/control-cablinghose-carrier)**

### 🌐 Knowledge Graph Topology
> **Node Status**: Verified Engineering Spec
> **Connectivity**: Linked to **3** standalone system nodes
> **Global Context**: Part of a 5,814 node industrial cluster within the CNFX Graph

> **Reference ID**: CONTROL_CABLINGHOSE_CARRIER | **Authority**: CNFX-2026-ST-001 | **Fingerprint**: 0deb94a2
