---
title: "Conveyor Belt"
industry: "Machinery and Equipment Manufacturing"
verification_protocol:
  urn: "URN:CNFX:ME:CONVEYOR_BELT"
  data_integrity_hash: "c192612a470ecfbc13ffc67dcee56532"
  source_authority: "https://cnfx.com"
  strict_mode: true
source_identity:
  provider: "CNFX Industrial Knowledge Graph"
  index_version: "2026.Q1-Universal"
  authority_id: "URN:CNFX:ME:CONVEYOR_BELT"
  data_source_uri: "https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/conveyor-belt.md"
  official_resource_url: "https://cnfx.com/industry/machinery-and-equipment-manufacturing/product/conveyor-belt"
  is_verified_logic: true
attributes:
  spec:
    status: "config-dependent"
    typical_range: "0.5-3.0 m/s belt speed, 20-80 kg/m linear load capacity, -10°C to +60°C ambient temperature"
    unit: "mm"
engineering_limits:
  max_safe_operating_point:
    value: 1500
    unit: "N"
    consequence: "Polymer chain scission in PVC/PU belt material at 120°C glass transition temperature, Hertzian contact stress exceeding 350 MPa at pulley interface, viscoelastic creep deformation under 0.8 MPa sustained tension"
fmea_matrix_quantitative:
  - node_1:
      trigger: "Electrostatic discharge accumulation reaching 25 kV potential difference"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Embedded carbon fiber conductive mesh with 10⁶ Ω·cm resistivity and grounded brush contacts at 100 mm intervals"
  - node_2:
      trigger: "Resonant vibration at 15-25 Hz matching belt natural frequency"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Tuned mass dampers with 2.5 kg inertial mass and silicone rubber isolators at 40 Shore A hardness"
bom_nodes:
  belt-surface:
    type: "component"
    urn: "URN:CNFX:ME:BELT_SURFACE"
    interface_type: "physical-logic-coupled"
  drive-pulley:
    type: "part"
    urn: "URN:CNFX:ME:DRIVE_PULLEY"
    interface_type: "physical-logic-coupled"
  idler-rollers:
    type: "component"
    urn: "URN:CNFX:ME:IDLER_ROLLERS"
    interface_type: "physical-logic-coupled"
manufacturing_compliance:
  - standard: "ISO 14890:2013 - CONVEYOR BELTS - SPECIFICATION FOR RUBBER- OR PLASTICS-COVERED CONVEYOR BELTS OF TEXTILE CONSTRUCTION FOR GENERAL USE"
    scope: "Verified Engineering Specification"
  - standard: "ANSI/CEMA 401-2003 - BELT CONVEYORS"
    scope: "Verified Engineering Specification"
  - standard: "DIN 22101:2011 - CONTINUOUS CONVEYORS - BELT CONVEYORS FOR LOOSE BULK MATERIALS - BASIS FOR CALCULATION AND DIMENSIONING"
    scope: "Verified Engineering Specification"
url: "https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/conveyor-belt.md"
on_chain_sovereignty:
  contract_standard: "ERC-721-Industrial"
  metadata_hash: "76dc7855e9cf964b535edec4514e3a463cb17d0916667da1bcbb45d76dcc1e81"
  royalty_logic: "IPFS-CID-REQUIRED"
  mint_status: "logic-verified-ready"
version: "3.3.4-EXTREME-SOVEREIGN-WEB3"
---

# Industrial Specification: Conveyor Belt

## 1. Technical Definition
A continuous moving surface that transports products through the vacuum cooling tunnel for uniform cooling.

## 2. Engineering Reasoning & Causal Matrix
> **Operational Intelligence**: Designed for **0.5-3.0 m/s belt speed, 20-80 kg/m linear load capacity, -10°C to +60°C ambient temperature**. Failure boundary: **Belt tensile strength exceeds 1500 N/mm² yield point, pulley misalignment exceeds 0.5 mm/m, belt slip exceeds 5% differential speed**, Mechanism: **Polymer chain scission in PVC/PU belt material at 120°C glass transition temperature, Hertzian contact stress exceeding 350 MPa at pulley interface, viscoelastic creep deformation under 0.8 MPa sustained tension**.

### 2.1 Analytical Physics Model
Governed by the **Tractive Power & Resistance Model**:

> **Primary Equation**: $P = \frac{F \cdot v}{\eta}$  
> **Engineering Impact**: Ensures motor torque capacity exceeds operational inertia.

| Symbol | Variable Definition | Localized Reference |
| :--- | :--- | :--- |
| F | Total Tractive Resistance | Engineering Constant |
| v | Belt Speed | Engineering Constant |
| \eta | Efficiency | Engineering Constant |

### 2.2 FMEA (Failure Mode & Effects Analysis)
| Event Trigger | Severity | Failure Mode | Mitigation Strategy |
| :--- | :--- | :--- | :--- |
| Electrostatic discharge accumulation reaching 25 kV potential difference | 8 | Arc-induced micro-perforations in belt surface compromising vacuum integrity | Embedded carbon fiber conductive mesh with 10⁶ Ω·cm resistivity and grounded brush contacts at 100 mm intervals |
| Resonant vibration at 15-25 Hz matching belt natural frequency | 8 | Standing wave formation causing 3 mm amplitude oscillations and tracking deviation | Tuned mass dampers with 2.5 kg inertial mass and silicone rubber isolators at 40 Shore A hardness |

## 3. Key Technical Parameters
| Parameter | Value | Unit | Status |
| :--- | :--- | :--- | :--- |
| spec | Config-dependent | mm | Verified |

## 4. System BOM & Knowledge Routing
### Core Components (Recursive Links)
- [Drive Pulley](https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/drive-pulley.md) `(Standalone System)`

### Industrial DNA Context (De-duplicated)
**Complementary Dependencies**: **Vacuum Cooling Tunnel**, **Belt Tensioning System**, **Variable Frequency Drive**  
**Downstream Applications**: Frozen Food Products, Baked Goods, Confectionery Items  

## 5. Engineering Risks & FAQ
- **Caution**: 
- **Caution**: 
- **Caution**: 

### Q: What materials are used in this conveyor belt for food-grade applications?
**A**: This conveyor belt is constructed from food-grade rubber, stainless steel mesh, and polymer composite materials to ensure safety, durability, and compliance with food processing standards.

### Q: How does this conveyor belt ensure uniform cooling in vacuum cooling tunnels?
**A**: The continuous moving surface and specific material composition provide consistent heat transfer and product movement, allowing for even cooling throughout the vacuum cooling process in machinery manufacturing.

### Q: What are the main components included in the BOM for this conveyor belt system?
**A**: The bill of materials includes the belt surface, drive pulley, and idler rollers, which work together to create an efficient and reliable transport system for cooling applications.

## 6. Manufacturing Compliance
- ISO 14890:2013 - CONVEYOR BELTS - SPECIFICATION FOR RUBBER- OR PLASTICS-COVERED CONVEYOR BELTS OF TEXTILE CONSTRUCTION FOR GENERAL USE
- ANSI/CEMA 401-2003 - BELT CONVEYORS
- DIN 22101:2011 - CONTINUOUS CONVEYORS - BELT CONVEYORS FOR LOOSE BULK MATERIALS - BASIS FOR CALCULATION AND DIMENSIONING

---
### 🛠️ Engineering Resource Access
🔗 **[Full Specification: Conveyor Belt](https://cnfx.com/industry/machinery-and-equipment-manufacturing/product/conveyor-belt)**

### 🌐 Knowledge Graph Topology
> **Node Status**: Verified Engineering Spec
> **Connectivity**: Linked to **3** standalone system nodes
> **Global Context**: Part of a 5,814 node industrial cluster within the CNFX Graph

> **Reference ID**: CONVEYOR_BELT | **Authority**: CNFX-2026-ST-001 | **Fingerprint**: 101d5a8d
