---
title: "Exit Track/Linear Feeder"
industry: "Machinery and Equipment Manufacturing"
verification_protocol:
  urn: "URN:CNFX:ME:EXIT_TRACKLINEAR_FEEDER"
  data_integrity_hash: "0f5a57d9c354f2eaf446d1da116f591d"
  source_authority: "https://cnfx.com"
  strict_mode: true
source_identity:
  provider: "CNFX Industrial Knowledge Graph"
  index_version: "2026.Q1-Universal"
  authority_id: "URN:CNFX:ME:EXIT_TRACKLINEAR_FEEDER"
  data_source_uri: "https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/exit-tracklinear-feeder.md"
  official_resource_url: "https://cnfx.com/industry/machinery-and-equipment-manufacturing/product/exit-tracklinear-feeder"
  is_verified_logic: true
attributes:
  spec:
    status: "config-dependent"
    typical_range: "0.5-2.5 m/s linear velocity, 0.1-5.0 kg part mass, 300-1200 mm track length"
    unit: "mm"
engineering_limits:
  max_safe_operating_point:
    value: 0.5
    unit: "mm"
    consequence: "Belt/chain elastic deformation exceeding yield point (Young's modulus 2.1 GPa for steel), static friction coefficient drop below 0.15 (steel-on-steel), cumulative misalignment causing Hertzian contact stress &gt;1.5 GPa"
fmea_matrix_quantitative:
  - node_1:
      trigger: "Accumulated particulate contamination (ISO 4406 Class 18/16/13) exceeding 15 mg/cm²"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Integrated air knife cleaning system with 3 bar pressure at 30° incidence angle, plus magnetic filtration for ferrous particles"
  - node_2:
      trigger: "Resonant vibration at 85-120 Hz matching track natural frequency"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Damped mounting system with 0.25 critical damping ratio, plus variable frequency drive with ±5 Hz anti-resonance programming"
bom_nodes:
  track-channel:
    type: "component"
    urn: "URN:CNFX:ME:TRACK_CHANNEL"
    interface_type: "physical-logic-coupled"
  vibration-mechanism:
    type: "part"
    urn: "URN:CNFX:ME:VIBRATION_MECHANISM"
    interface_type: "physical-logic-coupled"
  mounting-brackets:
    type: "component"
    urn: "URN:CNFX:ME:MOUNTING_BRACKETS"
    interface_type: "physical-logic-coupled"
  orientation-guides:
    type: "component"
    urn: "URN:CNFX:ME:ORIENTATION_GUIDES"
    interface_type: "physical-logic-coupled"
manufacturing_compliance:
  - standard: "ISO 3408-1:2006 (BALL SCREWS - PART 1: VOCABULARY AND DESIGNATION)"
    scope: "Verified Engineering Specification"
  - standard: "ANSI B5.48-1977 (BALL SCREWS)"
    scope: "Verified Engineering Specification"
  - standard: "DIN 69051-1:2017 (BALL SCREW DRIVES - PART 1: GENERAL CONDITIONS, ACCEPTANCE CONDITIONS, ACCEPTANCE TESTS)"
    scope: "Verified Engineering Specification"
url: "https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/exit-tracklinear-feeder.md"
on_chain_sovereignty:
  contract_standard: "ERC-721-Industrial"
  metadata_hash: "fb87c73777ff1d7116863128366ef287822d8b54017d43790ebba70b5a5bd47b"
  royalty_logic: "IPFS-CID-REQUIRED"
  mint_status: "logic-verified-ready"
version: "3.3.4-EXTREME-SOVEREIGN-WEB3"
---

# Industrial Specification: Exit Track/Linear Feeder

## 1. Technical Definition
A linear conveying component that receives and transports oriented parts from a vibratory bowl feeder to downstream processes.

## 2. Engineering Reasoning & Causal Matrix
> **Operational Intelligence**: Designed for **0.5-2.5 m/s linear velocity, 0.1-5.0 kg part mass, 300-1200 mm track length**. Failure boundary: **Track deflection exceeding 0.5 mm/m at 10 kg load, belt/chain slip exceeding 2% at 2.5 m/s, alignment deviation &gt;0.2 mm from centerline**, Mechanism: **Belt/chain elastic deformation exceeding yield point (Young's modulus 2.1 GPa for steel), static friction coefficient drop below 0.15 (steel-on-steel), cumulative misalignment causing Hertzian contact stress &gt;1.5 GPa**.

### 2.1 Analytical Physics Model
Governed by the **Harmonic Vibration Force Generation**:

> **Primary Equation**: $F_e = m \cdot r \cdot \omega^2 \sin(\omega t)$  
> **Engineering Impact**: Calculates centrifugal force for vibratory sifters/feeders.

| Symbol | Variable Definition | Localized Reference |
| :--- | :--- | :--- |
| m | Eccentric Mass | Engineering Constant |
| r | Radius | Engineering Constant |
| \omega | Angular Frequency | Engineering Constant |

### 2.2 FMEA (Failure Mode & Effects Analysis)
| Event Trigger | Severity | Failure Mode | Mitigation Strategy |
| :--- | :--- | :--- | :--- |
| Accumulated particulate contamination (ISO 4406 Class 18/16/13) exceeding 15 mg/cm² | 8 | Increased dynamic friction coefficient from 0.12 to 0.35, causing belt slip and part misorientation | Integrated air knife cleaning system with 3 bar pressure at 30° incidence angle, plus magnetic filtration for ferrous particles |
| Resonant vibration at 85-120 Hz matching track natural frequency | 8 | Amplitude magnification factor &gt;5 causing part bounce exceeding 0.8 mm, disrupting orientation | Damped mounting system with 0.25 critical damping ratio, plus variable frequency drive with ±5 Hz anti-resonance programming |

## 3. Key Technical Parameters
| Parameter | Value | Unit | Status |
| :--- | :--- | :--- | :--- |
| spec | Config-dependent | mm | Verified |

## 4. System BOM & Knowledge Routing
### Core Components (Recursive Links)
- [Vibration Mechanism](https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/vibration-mechanism.md) `(Standalone System)`

### Industrial DNA Context (De-duplicated)
**Complementary Dependencies**: **Vibratory Bowl Feeder**, **Automated Assembly Station**, **Parts Inspection System**  
**Downstream Applications**: Electronic Connectors, Small Mechanical Assemblies, Pharmaceutical Capsules  

## 5. Engineering Risks & FAQ
- **Caution**: 
- **Caution**: 
- **Caution**: 

### Q: What materials are available for the Exit Track/Linear Feeder?
**A**: Our linear feeders are constructed from stainless steel for durability, aluminum alloy for lightweight applications, or engineering plastics for corrosion resistance and cost-effectiveness.

### Q: How does the linear feeder integrate with vibratory bowl feeders?
**A**: The exit track receives oriented parts directly from vibratory bowl feeders through mounting brackets and orientation guides, then transports them smoothly to downstream assembly or processing stations.

### Q: What maintenance is required for the vibration mechanism?
**A**: The vibration mechanism requires minimal maintenance - periodic cleaning of the track channel and inspection of mounting brackets. Most models feature sealed components for long service life in industrial environments.

## 6. Manufacturing Compliance
- ISO 3408-1:2006 (BALL SCREWS - PART 1: VOCABULARY AND DESIGNATION)
- ANSI B5.48-1977 (BALL SCREWS)
- DIN 69051-1:2017 (BALL SCREW DRIVES - PART 1: GENERAL CONDITIONS, ACCEPTANCE CONDITIONS, ACCEPTANCE TESTS)

---
### 🛠️ Engineering Resource Access
🔗 **[Full Specification: Exit Track/Linear Feeder](https://cnfx.com/industry/machinery-and-equipment-manufacturing/product/exit-tracklinear-feeder)**

### 🌐 Knowledge Graph Topology
> **Node Status**: Verified Engineering Spec
> **Connectivity**: Linked to **4** standalone system nodes
> **Global Context**: Part of a 5,814 node industrial cluster within the CNFX Graph

> **Reference ID**: EXIT_TRACKLINEAR_FEEDER | **Authority**: CNFX-2026-ST-001 | **Fingerprint**: 882e162d
