---
title: "Hydraulic Pump Mounting Frame"
industry: "Machinery and Equipment Manufacturing"
verification_protocol:
  urn: "URN:CNFX:ME:HYDRAULIC_PUMP_MOUNTING_FRAME"
  data_integrity_hash: "2b1e02b3dcbac46729cca3b4a9d733d0"
  source_authority: "https://cnfx.com"
  strict_mode: true
source_identity:
  provider: "CNFX Industrial Knowledge Graph"
  index_version: "2026.Q1-Universal"
  authority_id: "URN:CNFX:ME:HYDRAULIC_PUMP_MOUNTING_FRAME"
  data_source_uri: "https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/hydraulic-pump-mounting-frame.md"
  official_resource_url: "https://cnfx.com/industry/machinery-and-equipment-manufacturing/product/hydraulic-pump-mounting-frame"
  is_verified_logic: true
attributes:
  spec:
    status: "config-dependent"
    typical_range: "0-300 bar hydraulic pressure, -40°C to 120°C temperature range, 0.1-100 Hz vibration frequency"
    unit: "mm"
engineering_limits:
  max_safe_operating_point:
    value: 350
    unit: "MPa"
    consequence: "High-cycle fatigue from pump-induced vibrations exceeding material endurance limit (typically 210 MPa for ASTM A36 steel), thermal stress from differential expansion between frame and pump mounting surfaces (coefficient mismatch of 12×10⁻⁶/°C for steel vs 23×10⁻⁶/°C for aluminum)"
fmea_matrix_quantitative:
  - node_1:
      trigger: "Resonant vibration at 150 Hz natural frequency"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Stiffness tuning with rib reinforcements to shift natural frequency to 180 Hz, damping pads with 0.15 loss factor"
  - node_2:
      trigger: "Thermal gradient of 80°C across frame-pump interface"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Thermal break design with Invar 36 inserts (1.2×10⁻⁶/°C CTE), slotted bolt holes allowing 1.2 mm thermal expansion"
bom_nodes:
  base-plate:
    type: "component"
    urn: "URN:CNFX:ME:BASE_PLATE"
    interface_type: "physical-logic-coupled"
  support-beams:
    type: "component"
    urn: "URN:CNFX:ME:SUPPORT_BEAMS"
    interface_type: "physical-logic-coupled"
  mounting-brackets:
    type: "component"
    urn: "URN:CNFX:ME:MOUNTING_BRACKETS"
    interface_type: "physical-logic-coupled"
  alignment-pins:
    type: "component"
    urn: "URN:CNFX:ME:ALIGNMENT_PINS"
    interface_type: "physical-logic-coupled"
manufacturing_compliance:
url: "https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/hydraulic-pump-mounting-frame.md"
on_chain_sovereignty:
  contract_standard: "ERC-721-Industrial"
  metadata_hash: "f6dd0e5c5c4990ac6832cec6fad4a93782e531b269bcf1bed9dd06b7a5a51ee4"
  royalty_logic: "IPFS-CID-REQUIRED"
  mint_status: "logic-verified-ready"
version: "3.3.4-EXTREME-SOVEREIGN-WEB3"
---

# Industrial Specification: Hydraulic Pump Mounting Frame

## 1. Technical Definition
A structural frame designed to securely mount and support a hydraulic pump within machinery.

## 2. Engineering Reasoning & Causal Matrix
> **Operational Intelligence**: Designed for **0-300 bar hydraulic pressure, -40°C to 120°C temperature range, 0.1-100 Hz vibration frequency**. Failure boundary: **Structural yield at 350 MPa von Mises stress, resonance at 150 Hz natural frequency, thermal deformation exceeding 0.5 mm at 150°C**, Mechanism: **High-cycle fatigue from pump-induced vibrations exceeding material endurance limit (typically 210 MPa for ASTM A36 steel), thermal stress from differential expansion between frame and pump mounting surfaces (coefficient mismatch of 12×10⁻⁶/°C for steel vs 23×10⁻⁶/°C for aluminum)**.

### 2.1 Analytical Physics Model
Governed by the **Frame Structural Deflection Analysis**:

> **Primary Equation**: $\delta = \frac{5 q L^4}{384 E I}$  
> **Engineering Impact**: Ensures structural stability for multi-stage machines.

| Symbol | Variable Definition | Localized Reference |
| :--- | :--- | :--- |
| q | Uniform Load | Engineering Constant |
| E | Elastic Modulus | Engineering Constant |
| I | Moment of Inertia | Engineering Constant |

### 2.2 FMEA (Failure Mode & Effects Analysis)
| Event Trigger | Severity | Failure Mode | Mitigation Strategy |
| :--- | :--- | :--- | :--- |
| Resonant vibration at 150 Hz natural frequency | 8 | Accelerated fatigue crack propagation in frame welds | Stiffness tuning with rib reinforcements to shift natural frequency to 180 Hz, damping pads with 0.15 loss factor |
| Thermal gradient of 80°C across frame-pump interface | 8 | Warp-induced mounting bolt shear failure at 450 MPa stress | Thermal break design with Invar 36 inserts (1.2×10⁻⁶/°C CTE), slotted bolt holes allowing 1.2 mm thermal expansion |

## 3. Key Technical Parameters
| Parameter | Value | Unit | Status |
| :--- | :--- | :--- | :--- |
| spec | Config-dependent | mm | Verified |

## 4. System BOM & Knowledge Routing
### Core Components (Recursive Links)

### Industrial DNA Context (De-duplicated)
**Complementary Dependencies**: **Hydraulic Power Unit**, **Hydraulic Fluid Reservoir**, **Hydraulic Control Valves**  
**Downstream Applications**: Construction Excavators, Agricultural Tractors, Industrial Presses  

## 5. Engineering Risks & FAQ
- **Caution**: 
- **Caution**: 
- **Caution**: 

### Q: What materials are available for the hydraulic pump mounting frame?
**A**: Our mounting frames are available in carbon steel for standard applications and stainless steel for corrosive environments or high-cleanliness requirements.

### Q: How does the mounting frame ensure proper pump alignment?
**A**: The frame includes precision alignment pins and adjustable mounting brackets that allow for exact positioning and secure fastening of hydraulic pumps to prevent vibration and misalignment.

### Q: Can this frame accommodate different pump sizes and models?
**A**: Yes, the modular design with adjustable mounting brackets and support beams allows customization to fit various hydraulic pump dimensions and configurations commonly used in machinery manufacturing.

## 6. Manufacturing Compliance

---
### 🛠️ Engineering Resource Access
🔗 **[Full Specification: Hydraulic Pump Mounting Frame](https://cnfx.com/industry/machinery-and-equipment-manufacturing/product/hydraulic-pump-mounting-frame)**

### 🌐 Knowledge Graph Topology
> **Node Status**: Verified Engineering Spec
> **Connectivity**: Linked to **4** standalone system nodes
> **Global Context**: Part of a 5,814 node industrial cluster within the CNFX Graph

> **Reference ID**: HYDRAULIC_PUMP_MOUNTING_FRAME | **Authority**: CNFX-2026-ST-001 | **Fingerprint**: daa0c53c
