---
title: "Main Frame Body"
industry: "Machinery and Equipment Manufacturing"
verification_protocol:
  urn: "URN:CNFX:ME:MAIN_FRAME_BODY"
  data_integrity_hash: "780b539a2b30c51e94e3b9f4854303d6"
  source_authority: "https://cnfx.com"
  strict_mode: true
source_identity:
  provider: "CNFX Industrial Knowledge Graph"
  index_version: "2026.Q1-Universal"
  authority_id: "URN:CNFX:ME:MAIN_FRAME_BODY"
  data_source_uri: "https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/main-frame-body.md"
  official_resource_url: "https://cnfx.com/industry/machinery-and-equipment-manufacturing/product/main-frame-body"
  is_verified_logic: true
attributes:
  spec:
    status: "config-dependent"
    typical_range: "0-150 kN compressive load, -20 to 80°C ambient temperature, 0-100% relative humidity"
    unit: "mm"
engineering_limits:
  max_safe_operating_point:
    value: 180
    unit: "MPa"
    consequence: "Stress corrosion cracking from chloride ion exposure during CIP cycles, low-cycle fatigue from 10^5 compression cycles at 80% yield strength"
fmea_matrix_quantitative:
  - node_1:
      trigger: "Misalignment exceeding 0.1 mm/m during installation"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Laser alignment verification protocol with 0.02 mm tolerance, hardened steel wear plates with 62 HRC surface hardness"
  - node_2:
      trigger: "Resonant vibration at 85 Hz matching structural natural frequency"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Dynamic vibration analysis during design, tuned mass dampers with 90% vibration attenuation at 80-90 Hz range"
bom_nodes:
  mounting-flange:
    type: "component"
    urn: "URN:CNFX:ME:MOUNTING_FLANGE"
    interface_type: "physical-logic-coupled"
  alignment-guide-rails:
    type: "component"
    urn: "URN:CNFX:ME:ALIGNMENT_GUIDE_RAILS"
    interface_type: "physical-logic-coupled"
  inspection-ports:
    type: "component"
    urn: "URN:CNFX:ME:INSPECTION_PORTS"
    interface_type: "physical-logic-coupled"
  powder-containment-seals:
    type: "component"
    urn: "URN:CNFX:ME:POWDER_CONTAINMENT_SEALS"
    interface_type: "physical-logic-coupled"
manufacturing_compliance:
  - standard: "ISO 9001:2015 - QUALITY MANAGEMENT SYSTEMS"
    scope: "Verified Engineering Specification"
  - standard: "CE MARKING - MACHINERY DIRECTIVE 2006/42/EC"
    scope: "Verified Engineering Specification"
url: "https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/main-frame-body.md"
on_chain_sovereignty:
  contract_standard: "ERC-721-Industrial"
  metadata_hash: "e78f60b39e75be039680581a81260740b13ce2fd34df7170494cde79a84d2572"
  royalty_logic: "IPFS-CID-REQUIRED"
  mint_status: "logic-verified-ready"
version: "3.3.4-EXTREME-SOVEREIGN-WEB3"
---

# Industrial Specification: Main Frame Body

## 1. Technical Definition
The primary structural housing that supports and contains the internal mechanisms of a pharmaceutical tablet press feed frame.

## 2. Engineering Reasoning & Causal Matrix
> **Operational Intelligence**: Designed for **0-150 kN compressive load, -20 to 80°C ambient temperature, 0-100% relative humidity**. Failure boundary: **Yield strength exceeded at 180 MPa stress concentration at mounting bolt interfaces, 0.5 mm permanent deformation at guide rail contact surfaces**, Mechanism: **Stress corrosion cracking from chloride ion exposure during CIP cycles, low-cycle fatigue from 10^5 compression cycles at 80% yield strength**.

### 2.1 Analytical Physics Model
Governed by the **Frame Structural Deflection Analysis**:

> **Primary Equation**: $\delta = \frac{5 q L^4}{384 E I}$  
> **Engineering Impact**: Ensures structural stability for multi-stage machines.

| Symbol | Variable Definition | Localized Reference |
| :--- | :--- | :--- |
| q | Uniform Load | Engineering Constant |
| E | Elastic Modulus | Engineering Constant |
| I | Moment of Inertia | Engineering Constant |

### 2.2 FMEA (Failure Mode & Effects Analysis)
| Event Trigger | Severity | Failure Mode | Mitigation Strategy |
| :--- | :--- | :--- | :--- |
| Misalignment exceeding 0.1 mm/m during installation | 8 | Accelerated wear at guide rail interfaces causing 0.01 mm/hour material loss | Laser alignment verification protocol with 0.02 mm tolerance, hardened steel wear plates with 62 HRC surface hardness |
| Resonant vibration at 85 Hz matching structural natural frequency | 8 | Crack initiation at stress concentration points after 10^7 cycles | Dynamic vibration analysis during design, tuned mass dampers with 90% vibration attenuation at 80-90 Hz range |

## 3. Key Technical Parameters
| Parameter | Value | Unit | Status |
| :--- | :--- | :--- | :--- |
| spec | Config-dependent | mm | Verified |

## 4. System BOM & Knowledge Routing
### Core Components (Recursive Links)

### Industrial DNA Context (De-duplicated)
**Complementary Dependencies**: **Pharmaceutical Tablet Press**, **Powder Feeding System**, **Compression Force Monitoring System**  
**Downstream Applications**: Pharmaceutical Tablets, Nutraceutical Tablets, Veterinary Medicine Tablets  

## 5. Engineering Risks & FAQ
- **Caution**: 
- **Caution**: 
- **Caution**: 

### Q: What are the key benefits of using Stainless Steel 316L for the main frame body?
**A**: Stainless Steel 316L offers superior corrosion resistance, essential for pharmaceutical environments, along with high strength, durability, and compliance with hygiene standards.

### Q: How does the main frame body ensure powder containment in tablet press operations?
**A**: The main frame body incorporates precision powder containment seals and a sealed structural design to prevent leakage and cross-contamination during tablet production.

### Q: What maintenance is required for the main frame body in pharmaceutical machinery?
**A**: Regular inspection of seals and alignment rails, cleaning with pharmaceutical-grade agents, and periodic checks for structural integrity ensure optimal performance and compliance.

## 6. Manufacturing Compliance
- ISO 9001:2015 - QUALITY MANAGEMENT SYSTEMS
- CE MARKING - MACHINERY DIRECTIVE 2006/42/EC

---
### 🛠️ Engineering Resource Access
🔗 **[Full Specification: Main Frame Body](https://cnfx.com/industry/machinery-and-equipment-manufacturing/product/main-frame-body)**

### 🌐 Knowledge Graph Topology
> **Node Status**: Verified Engineering Spec
> **Connectivity**: Linked to **4** standalone system nodes
> **Global Context**: Part of a 5,814 node industrial cluster within the CNFX Graph

> **Reference ID**: MAIN_FRAME_BODY | **Authority**: CNFX-2026-ST-001 | **Fingerprint**: 25fa5e79
