---
title: "Mover/Forcer"
industry: "Machinery and Equipment Manufacturing"
verification_protocol:
  urn: "URN:CNFX:ME:MOVERFORCER"
  data_integrity_hash: "3684e83a9daf6f2d6a98d93160d4e100"
  source_authority: "https://cnfx.com"
  strict_mode: true
source_identity:
  provider: "CNFX Industrial Knowledge Graph"
  index_version: "2026.Q1-Universal"
  authority_id: "URN:CNFX:ME:MOVERFORCER"
  data_source_uri: "https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/moverforcer.md"
  official_resource_url: "https://cnfx.com/industry/machinery-and-equipment-manufacturing/product/moverforcer"
  is_verified_logic: true
attributes:
  spec:
    status: "config-dependent"
    typical_range: "0.1-1000 N continuous force, 0.01-100 mm positioning accuracy, -40°C to 150°C ambient temperature"
    unit: "mm"
engineering_limits:
  max_safe_operating_point:
    value: 180
    unit: "°C"
    consequence: "Joule heating exceeding P = I²R thermal dissipation capacity, leading to insulation class H (180°C) breakdown; Lorentz force F = BIL where B field degradation occurs at 80% of Curie point"
fmea_matrix_quantitative:
  - node_1:
      trigger: "Hall sensor misalignment exceeding 0.5° mechanical tolerance"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Integrated optical encoder with 0.001° resolution and automatic phase compensation algorithm"
  - node_2:
      trigger: "Laminated core delamination due to &gt;50 MPa interlaminar shear stress"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Vacuum pressure impregnation with Class F epoxy resin achieving 95% fill factor"
bom_nodes:
  magnet-array:
    type: "part"
    urn: "URN:CNFX:ME:MAGNET_ARRAY"
    interface_type: "physical-logic-coupled"
  back-iron:
    type: "component"
    urn: "URN:CNFX:ME:BACK_IRON"
    interface_type: "physical-logic-coupled"
  cooling-system:
    type: "device"
    urn: "URN:CNFX:ME:COOLING_SYSTEM"
    interface_type: "physical-logic-coupled"
  position-sensor:
    type: "part"
    urn: "URN:CNFX:ME:POSITION_SENSOR"
    interface_type: "physical-logic-coupled"
manufacturing_compliance:
  - standard: "ISO 9001:2015 QUALITY MANAGEMENT SYSTEMS"
    scope: "Verified Engineering Specification"
  - standard: "ANSI B11.19-2019 PERFORMANCE REQUIREMENTS FOR RISK REDUCTION AND SAFEGUARDING"
    scope: "Verified Engineering Specification"
  - standard: "CE MARKING (MACHINERY DIRECTIVE 2006/42/EC)"
    scope: "Verified Engineering Specification"
url: "https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/moverforcer.md"
on_chain_sovereignty:
  contract_standard: "ERC-721-Industrial"
  metadata_hash: "b6177cce14443b8e16ff32a0100ee239445ece8173e6cec87e35f05a600e9a00"
  royalty_logic: "IPFS-CID-REQUIRED"
  mint_status: "logic-verified-ready"
version: "3.3.4-EXTREME-SOVEREIGN-WEB3"
---

# Industrial Specification: Mover/Forcer

## 1. Technical Definition
The moving component of a linear motor or servo motor that generates mechanical force and motion.

## 2. Engineering Reasoning & Causal Matrix
> **Operational Intelligence**: Designed for **0.1-1000 N continuous force, 0.01-100 mm positioning accuracy, -40°C to 150°C ambient temperature**. Failure boundary: **Coil insulation breakdown at 180°C, permanent magnet demagnetization at 80% of Curie temperature (typically 310°C for NdFeB), bearing seizure at 120°C lubricant degradation**, Mechanism: **Joule heating exceeding P = I²R thermal dissipation capacity, leading to insulation class H (180°C) breakdown; Lorentz force F = BIL where B field degradation occurs at 80% of Curie point**.

### 2.2 FMEA (Failure Mode & Effects Analysis)
| Event Trigger | Severity | Failure Mode | Mitigation Strategy |
| :--- | :--- | :--- | :--- |
| Hall sensor misalignment exceeding 0.5° mechanical tolerance | 8 | Commutation timing error causing torque ripple &gt;15% and position overshoot | Integrated optical encoder with 0.001° resolution and automatic phase compensation algorithm |
| Laminated core delamination due to &gt;50 MPa interlaminar shear stress | 8 | Eddy current losses increasing by 300% at 1000 Hz switching frequency | Vacuum pressure impregnation with Class F epoxy resin achieving 95% fill factor |

## 3. Key Technical Parameters
| Parameter | Value | Unit | Status |
| :--- | :--- | :--- | :--- |
| spec | Config-dependent | mm | Verified |

## 4. System BOM & Knowledge Routing
### Core Components (Recursive Links)
- [Magnet Array](https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/magnet-array.md) `(Standalone System)`
- [Cooling System](https://cnfx.com/llms/industry/basic-metal-manufacturing/product/cooling-system.md) `(Standalone System)`
- [Position Sensor](https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/position-sensor.md) `(Standalone System)`

### Industrial DNA Context (De-duplicated)
**Complementary Dependencies**: **Linear Motor Controller**, **Servo Drive Amplifier**  
**Downstream Applications**: CNC Machine Tools, Robotic Arms, Packaging Machinery  

## 5. Engineering Risks & FAQ
- **Caution**: 
- **Caution**: 
- **Caution**: 

### Q: What materials are used in the mover/forcer for durability and performance?
**A**: The mover/forcer is constructed with neodymium magnets for strong magnetic fields, laminated steel to reduce eddy currents, aluminum alloy for lightweight structure, and copper windings for efficient electrical conductivity.

### Q: How does the cooling system in the mover/forcer enhance motor operation?
**A**: The integrated cooling system prevents overheating during continuous operation, ensuring stable performance, extending component lifespan, and maintaining precision in force generation for industrial applications.

### Q: What is the role of the position sensor in the mover/forcer assembly?
**A**: The position sensor provides real-time feedback on the mover's location, enabling precise control, accurate motion tracking, and improved efficiency in linear or servo motor systems for manufacturing equipment.

## 6. Manufacturing Compliance
- ISO 9001:2015 QUALITY MANAGEMENT SYSTEMS
- ANSI B11.19-2019 PERFORMANCE REQUIREMENTS FOR RISK REDUCTION AND SAFEGUARDING
- CE MARKING (MACHINERY DIRECTIVE 2006/42/EC)

---
### 🛠️ Engineering Resource Access
🔗 **[Full Specification: Mover/Forcer](https://cnfx.com/industry/machinery-and-equipment-manufacturing/product/moverforcer)**

### 🌐 Knowledge Graph Topology
> **Node Status**: Verified Engineering Spec
> **Connectivity**: Linked to **4** standalone system nodes
> **Global Context**: Part of a 5,814 node industrial cluster within the CNFX Graph

> **Reference ID**: MOVERFORCER | **Authority**: CNFX-2026-ST-001 | **Fingerprint**: 283437c5
