---
title: "Outlet Nozzle/Dispense Head"
industry: "Machinery and Equipment Manufacturing"
verification_protocol:
  urn: "URN:CNFX:ME:OUTLET_NOZZLEDISPENSE_HEAD"
  data_integrity_hash: "42b12e26f9f23356dbee4902245b9e45"
  source_authority: "https://cnfx.com"
  strict_mode: true
source_identity:
  provider: "CNFX Industrial Knowledge Graph"
  index_version: "2026.Q1-Universal"
  authority_id: "URN:CNFX:ME:OUTLET_NOZZLEDISPENSE_HEAD"
  data_source_uri: "https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/outlet-nozzledispense-head.md"
  official_resource_url: "https://cnfx.com/industry/machinery-and-equipment-manufacturing/product/outlet-nozzledispense-head"
  is_verified_logic: true
attributes:
  spec:
    status: "config-dependent"
    typical_range: "0.5-15 bar (7.25-217.5 psi) with flow rates of 0.1-20 L/min"
    unit: "mm"
engineering_limits:
  max_safe_operating_point:
    value: 25
    unit: "bar"
    consequence: "Cavitation-induced erosion at vapor pressure threshold of 0.023 bar (0.33 psi) for water at 20°C, combined with fatigue failure from cyclic pressure loading exceeding 10^7 cycles at 15 bar"
fmea_matrix_quantitative:
  - node_1:
      trigger: "Particulate contamination exceeding 5 μm diameter in fluid stream"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Install 3 μm absolute filtration with differential pressure monitoring at 0.5 bar threshold"
  - node_2:
      trigger: "Thermal cycling between -10°C and 80°C at 5 cycles/hour"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Material pairing with matched coefficients of thermal expansion (CTE &lt; 2×10^-6 K^-1 difference)"
bom_nodes:
  nozzle-bodyhousing:
    type: "part"
    urn: "URN:CNFX:ME:NOZZLE_BODYHOUSING"
    interface_type: "physical-logic-coupled"
  orifice-tipinsert:
    type: "component"
    urn: "URN:CNFX:ME:ORIFICE_TIPINSERT"
    interface_type: "physical-logic-coupled"
  sealgasket:
    type: "component"
    urn: "URN:CNFX:ME:SEALGASKET"
    interface_type: "physical-logic-coupled"
  actuator-if-applicable:
    type: "part"
    urn: "URN:CNFX:ME:ACTUATOR_IF_APPLICABLE"
    interface_type: "physical-logic-coupled"
manufacturing_compliance:
  - standard: "ISO 9001:2015 - QUALITY MANAGEMENT SYSTEMS"
    scope: "Verified Engineering Specification"
url: "https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/outlet-nozzledispense-head.md"
on_chain_sovereignty:
  contract_standard: "ERC-721-Industrial"
  metadata_hash: "69bb9373b4b60e717993e30c7676849e098260fb448ba138031b3c84785b7c69"
  royalty_logic: "IPFS-CID-REQUIRED"
  mint_status: "logic-verified-ready"
version: "3.3.4-EXTREME-SOVEREIGN-WEB3"
---

# Industrial Specification: Outlet Nozzle/Dispense Head

## 1. Technical Definition
The terminal component of a fluid path assembly that controls and directs the final discharge of liquid or semi-liquid materials.

## 2. Engineering Reasoning & Causal Matrix
> **Operational Intelligence**: Designed for **0.5-15 bar (7.25-217.5 psi) with flow rates of 0.1-20 L/min**. Failure boundary: **Structural failure occurs at 25 bar (362.5 psi) internal pressure or 0.01 mm orifice deformation**, Mechanism: **Cavitation-induced erosion at vapor pressure threshold of 0.023 bar (0.33 psi) for water at 20°C, combined with fatigue failure from cyclic pressure loading exceeding 10^7 cycles at 15 bar**.

### 2.1 Analytical Physics Model
Governed by the **Darcy-Weisbach Pressure Drop**:

> **Primary Equation**: $\Delta P = f \cdot \frac{L}{D} \cdot \frac{\rho v^2}{2}$  
> **Engineering Impact**: Critical for sizing CIP (Clean-In-Place) pump heads.

| Symbol | Variable Definition | Localized Reference |
| :--- | :--- | :--- |
| f | Friction Factor | Engineering Constant |
| L | Pipe Length | Engineering Constant |
| v | Velocity | Engineering Constant |

### 2.2 FMEA (Failure Mode & Effects Analysis)
| Event Trigger | Severity | Failure Mode | Mitigation Strategy |
| :--- | :--- | :--- | :--- |
| Particulate contamination exceeding 5 μm diameter in fluid stream | 8 | Orifice abrasion leading to 15% flow rate deviation from specification | Install 3 μm absolute filtration with differential pressure monitoring at 0.5 bar threshold |
| Thermal cycling between -10°C and 80°C at 5 cycles/hour | 8 | Differential thermal expansion causing 0.005 mm seat gap misalignment | Material pairing with matched coefficients of thermal expansion (CTE &lt; 2×10^-6 K^-1 difference) |

## 3. Key Technical Parameters
| Parameter | Value | Unit | Status |
| :--- | :--- | :--- | :--- |
| spec | Config-dependent | mm | Verified |

## 4. System BOM & Knowledge Routing
### Core Components (Recursive Links)
- [Nozzle Body/Housing](https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/nozzle-bodyhousing.md) `(Standalone System)`
- [Actuator (if applicable)](https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/actuator-if-applicable.md) `(Standalone System)`

### Industrial DNA Context (De-duplicated)
**Complementary Dependencies**: **Fluid Pumping System**, **Material Supply Tank**, **Precision Positioning System**  
**Downstream Applications**: Adhesive Dispensing Systems, Lubrication Systems, Food Packaging Equipment  

## 5. Engineering Risks & FAQ
- **Caution**: 
- **Caution**: 
- **Caution**: 

### Q: What materials are used in this outlet nozzle?
**A**: This outlet nozzle is constructed from Stainless Steel 316L, offering excellent corrosion resistance and durability for industrial fluid dispensing applications.

### Q: What components are included in the BOM for this dispense head?
**A**: The bill of materials includes an actuator (if applicable), nozzle body/housing, orifice tip/insert, and seal/gasket to ensure proper fluid control and discharge.

### Q: How does this nozzle control fluid discharge in manufacturing?
**A**: As the terminal component of a fluid path assembly, it precisely directs and regulates the final discharge of liquid or semi-liquid materials through its orifice tip and actuator mechanism.

## 6. Manufacturing Compliance
- ISO 9001:2015 - QUALITY MANAGEMENT SYSTEMS

---
### 🛠️ Engineering Resource Access
🔗 **[Full Specification: Outlet Nozzle/Dispense Head](https://cnfx.com/industry/machinery-and-equipment-manufacturing/product/outlet-nozzledispense-head)**

### 🌐 Knowledge Graph Topology
> **Node Status**: Verified Engineering Spec
> **Connectivity**: Linked to **4** standalone system nodes
> **Global Context**: Part of a 5,814 node industrial cluster within the CNFX Graph

> **Reference ID**: OUTLET_NOZZLEDISPENSE_HEAD | **Authority**: CNFX-2026-ST-001 | **Fingerprint**: c878fb13
