---
title: "Position Sensing System"
industry: "Machinery and Equipment Manufacturing"
verification_protocol:
  urn: "URN:CNFX:ME:POSITION_SENSING_SYSTEM"
  data_integrity_hash: "611e7893f89ddf1a6c326e8e417fcb1a"
  source_authority: "https://cnfx.com"
  strict_mode: true
source_identity:
  provider: "CNFX Industrial Knowledge Graph"
  index_version: "2026.Q1-Universal"
  authority_id: "URN:CNFX:ME:POSITION_SENSING_SYSTEM"
  data_source_uri: "https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/position-sensing-system.md"
  official_resource_url: "https://cnfx.com/industry/machinery-and-equipment-manufacturing/product/position-sensing-system"
  is_verified_logic: true
attributes:
  spec:
    status: "config-dependent"
    typical_range: "0.1-100 mm displacement with ±0.01 mm resolution at 1000 Hz sampling rate"
    unit: "mm"
engineering_limits:
  max_safe_operating_point:
    value: 10
    unit: "dB"
    consequence: "Hall effect sensor saturation at magnetic flux density exceeding 1.2 T, causing non-linear output beyond 120 mT operating range"
fmea_matrix_quantitative:
  - node_1:
      trigger: "Electromagnetic interference from adjacent 480 VAC motor drives inducing 50 mV noise on sensor lines"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Shielded twisted-pair cabling with ferrite chokes and differential signal conditioning at 24 VDC isolated power supply"
  - node_2:
      trigger: "Hydraulic fluid contamination with ISO 4406 Class 18/16/13 particles accumulating on magnetostrictive waveguide"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "316L stainless steel hermetically sealed transducer housing with IP69K rating and 10 μm inlet filtration"
bom_nodes:
  sensor-element:
    type: "component"
    urn: "URN:CNFX:ME:SENSOR_ELEMENT"
    interface_type: "physical-logic-coupled"
  signal-conditioner:
    type: "part"
    urn: "URN:CNFX:ME:SIGNAL_CONDITIONER"
    interface_type: "physical-logic-coupled"
  mounting-bracket:
    type: "component"
    urn: "URN:CNFX:ME:MOUNTING_BRACKET"
    interface_type: "physical-logic-coupled"
  protective-housing:
    type: "component"
    urn: "URN:CNFX:ME:PROTECTIVE_HOUSING"
    interface_type: "physical-logic-coupled"
manufacturing_compliance:
  - standard: "ISO 13849-1:2015 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS"
    scope: "Verified Engineering Specification"
  - standard: "IEC 60947-5-2:2007 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PROXIMITY SWITCHES"
    scope: "Verified Engineering Specification"
  - standard: "EN 60529:1991 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE)"
    scope: "Verified Engineering Specification"
url: "https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/position-sensing-system.md"
on_chain_sovereignty:
  contract_standard: "ERC-721-Industrial"
  metadata_hash: "c5016ce5189037d634e6027a7bf86e3eed94834ac3b8aa9c8a56787f9293859e"
  royalty_logic: "IPFS-CID-REQUIRED"
  mint_status: "logic-verified-ready"
version: "3.3.4-EXTREME-SOVEREIGN-WEB3"
---

# Industrial Specification: Position Sensing System

## 1. Technical Definition
A system that detects and monitors the position of hydraulic stopper components in real-time.

## 2. Engineering Reasoning & Causal Matrix
> **Operational Intelligence**: Designed for **0.1-100 mm displacement with ±0.01 mm resolution at 1000 Hz sampling rate**. Failure boundary: **Signal-to-noise ratio drops below 10 dB at 0.001 mm resolution or sampling frequency falls below 100 Hz**, Mechanism: **Hall effect sensor saturation at magnetic flux density exceeding 1.2 T, causing non-linear output beyond 120 mT operating range**.

### 2.1 Analytical Physics Model
Governed by the **Combined Measurement Uncertainty**:

> **Primary Equation**: $u_c = \sqrt{\sum u_i^2}$  
> **Engineering Impact**: Defines the precision confidence interval for inspection.

| Symbol | Variable Definition | Localized Reference |
| :--- | :--- | :--- |
| u_i | Standard Uncertainty components | Engineering Constant |

### 2.2 FMEA (Failure Mode & Effects Analysis)
| Event Trigger | Severity | Failure Mode | Mitigation Strategy |
| :--- | :--- | :--- | :--- |
| Electromagnetic interference from adjacent 480 VAC motor drives inducing 50 mV noise on sensor lines | 8 | Position feedback oscillation exceeding ±0.05 mm during hydraulic cylinder extension at 2 m/s velocity | Shielded twisted-pair cabling with ferrite chokes and differential signal conditioning at 24 VDC isolated power supply |
| Hydraulic fluid contamination with ISO 4406 Class 18/16/13 particles accumulating on magnetostrictive waveguide | 8 | Step response time degradation from 2 ms to 15 ms during 50 mm position changes | 316L stainless steel hermetically sealed transducer housing with IP69K rating and 10 μm inlet filtration |

## 3. Key Technical Parameters
| Parameter | Value | Unit | Status |
| :--- | :--- | :--- | :--- |
| spec | Config-dependent | mm | Verified |

## 4. System BOM & Knowledge Routing
### Core Components (Recursive Links)
- [Signal Conditioner](https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/signal-conditioner.md) `(Standalone System)`

### Industrial DNA Context (De-duplicated)
**Complementary Dependencies**: **Hydraulic Power Unit**, **Programmable Logic Controller (PLC)**, **Industrial HMI Panel**  
**Downstream Applications**: Hydraulic Presses, Injection Molding Machines, Metal Stamping Equipment  

## 5. Engineering Risks & FAQ
- **Caution**: 
- **Caution**: 
- **Caution**: 

### Q: What types of sensor elements are compatible with this position sensing system?
**A**: Our system supports various sensor technologies including potentiometric and magnetostrictive sensor elements, allowing customization based on precision requirements and environmental conditions in machinery applications.

### Q: How does this system protect against harsh industrial environments?
**A**: The system features stainless steel housing, protective seals, and durable electrical connectors designed to withstand moisture, vibration, and contaminants common in machinery and equipment manufacturing settings.

### Q: What components are included in the system's bill of materials?
**A**: The complete BOM includes mounting bracket for secure installation, protective housing, sensor element (selectable based on application), and signal conditioner for accurate real-time position data processing and output.

## 6. Manufacturing Compliance
- ISO 13849-1:2015 SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS
- IEC 60947-5-2:2007 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PROXIMITY SWITCHES
- EN 60529:1991 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE)

---
### 🛠️ Engineering Resource Access
🔗 **[Full Specification: Position Sensing System](https://cnfx.com/industry/machinery-and-equipment-manufacturing/product/position-sensing-system)**

### 🌐 Knowledge Graph Topology
> **Node Status**: Verified Engineering Spec
> **Connectivity**: Linked to **4** standalone system nodes
> **Global Context**: Part of a 5,814 node industrial cluster within the CNFX Graph

> **Reference ID**: POSITION_SENSING_SYSTEM | **Authority**: CNFX-2026-ST-001 | **Fingerprint**: 35b6beb3
