---
title: "Result Validator"
industry: "Machinery and Equipment Manufacturing"
verification_protocol:
  urn: "URN:CNFX:ME:RESULT_VALIDATOR"
  data_integrity_hash: "05e5ca92177d3c9422cbf4c50d23a055"
  source_authority: "https://cnfx.com"
  strict_mode: true
source_identity:
  provider: "CNFX Industrial Knowledge Graph"
  index_version: "2026.Q1-Universal"
  authority_id: "URN:CNFX:ME:RESULT_VALIDATOR"
  data_source_uri: "https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/result-validator.md"
  official_resource_url: "https://cnfx.com/industry/machinery-and-equipment-manufacturing/product/result-validator"
  is_verified_logic: true
attributes:
  spec:
    status: "config-dependent"
    typical_range: "3.3-5.0 VDC, 0-85°C ambient temperature, 0-95% relative humidity (non-condensing)"
    unit: "ms"
engineering_limits:
  max_safe_operating_point:
    value: 2.7
    unit: "VDC"
    consequence: "Electromigration in 7nm CMOS transistors at current densities &gt;1.5×10⁶ A/cm², dielectric breakdown at electric fields &gt;10 MV/cm, alpha particle-induced soft errors from packaging materials"
fmea_matrix_quantitative:
  - node_1:
      trigger: "Clock signal jitter exceeding 150 ps RMS due to power supply noise"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Dedicated low-noise LDO regulator (TPS7A4701) with &lt;20 μV RMS noise, on-die PLL with &lt;50 ps jitter, guard-ring shielding"
  - node_2:
      trigger: "Thermal cycling (ΔT=60°C) at 100 cycles/hour from adjacent power components"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Underfill encapsulation with CTE=12 ppm/°C, copper-core BGA balls (SnAg3.0Cu0.5), thermal isolation gap of 2.5 mm from heat sources"
bom_nodes:
  rule-processor:
    type: "part"
    urn: "URN:CNFX:ME:RULE_PROCESSOR"
    interface_type: "physical-logic-coupled"
  error-detector:
    type: "part"
    urn: "URN:CNFX:ME:ERROR_DETECTOR"
    interface_type: "physical-logic-coupled"
  validation-logic-unit:
    type: "part"
    urn: "URN:CNFX:ME:VALIDATION_LOGIC_UNIT"
    interface_type: "physical-logic-coupled"
manufacturing_compliance:
  - standard: "ISO 9001:2015 - QUALITY MANAGEMENT SYSTEMS"
    scope: "Verified Engineering Specification"
url: "https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/result-validator.md"
on_chain_sovereignty:
  contract_standard: "ERC-721-Industrial"
  metadata_hash: "da0fa7ba372feeaf25eb21df26150563bb827ee87cf89a51309230d8febf02bf"
  royalty_logic: "IPFS-CID-REQUIRED"
  mint_status: "logic-verified-ready"
version: "3.3.4-EXTREME-SOVEREIGN-WEB3"
---

# Industrial Specification: Result Validator

## 1. Technical Definition
A component within the Rule Matching Unit that verifies the accuracy and compliance of matching results against predefined rules and criteria.

## 2. Engineering Reasoning & Causal Matrix
> **Operational Intelligence**: Designed for **3.3-5.0 VDC, 0-85°C ambient temperature, 0-95% relative humidity (non-condensing)**. Failure boundary: **Voltage drop below 2.7 VDC sustained for &gt;10 ms, junction temperature exceeding 125°C, &gt;1000 ppm error rate in validation logic**, Mechanism: **Electromigration in 7nm CMOS transistors at current densities &gt;1.5×10⁶ A/cm², dielectric breakdown at electric fields &gt;10 MV/cm, alpha particle-induced soft errors from packaging materials**.

### 2.1 Analytical Physics Model
Governed by the **Combined Measurement Uncertainty**:

> **Primary Equation**: $u_c = \sqrt{\sum u_i^2}$  
> **Engineering Impact**: Defines the precision confidence interval for inspection.

| Symbol | Variable Definition | Localized Reference |
| :--- | :--- | :--- |
| u_i | Standard Uncertainty components | Engineering Constant |

### 2.2 FMEA (Failure Mode & Effects Analysis)
| Event Trigger | Severity | Failure Mode | Mitigation Strategy |
| :--- | :--- | :--- | :--- |
| Clock signal jitter exceeding 150 ps RMS due to power supply noise | 8 | Timing violation in synchronous validation logic causing false positive/negative results | Dedicated low-noise LDO regulator (TPS7A4701) with &lt;20 μV RMS noise, on-die PLL with &lt;50 ps jitter, guard-ring shielding |
| Thermal cycling (ΔT=60°C) at 100 cycles/hour from adjacent power components | 8 | Solder joint fatigue (Coffin-Manson exponent n=1.9) leading to intermittent electrical connection loss | Underfill encapsulation with CTE=12 ppm/°C, copper-core BGA balls (SnAg3.0Cu0.5), thermal isolation gap of 2.5 mm from heat sources |

## 3. Key Technical Parameters
| Parameter | Value | Unit | Status |
| :--- | :--- | :--- | :--- |
| spec | Config-dependent | ms | Verified |

## 4. System BOM & Knowledge Routing
### Core Components (Recursive Links)
- [Rule Processor](https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/rule-processor.md) `(Standalone System)`
- [Error Detector](https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/error-detector.md) `(Standalone System)`
- [Validation Logic Unit](https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/validation-logic-unit.md) `(Standalone System)`

### Industrial DNA Context (De-duplicated)
**Complementary Dependencies**: **Rule Configuration Interface**, **Data Acquisition System**, **Quality Control Monitoring Station**  
**Downstream Applications**: Validated Assembly Components, Certified Machinery Subsystems, Compliant Finished Equipment  

## 5. Engineering Risks & FAQ
- **Caution**: 
- **Caution**: 
- **Caution**: 

### Q: What is the primary function of the Result Validator in machinery manufacturing?
**A**: The Result Validator verifies the accuracy and compliance of matching results against predefined rules and criteria within the Rule Matching Unit, ensuring manufacturing processes meet quality standards.

### Q: What components make up the Result Validator's BOM?
**A**: The Bill of Materials includes the Rule Processor for interpreting rules, Error Detector for identifying discrepancies, and Validation Logic Unit for executing compliance checks.

### Q: How does the Result Validator improve manufacturing equipment reliability?
**A**: By electronically validating matching results against established criteria, it prevents errors in machinery operations, enhances quality control, and reduces production downtime through automated compliance verification.

## 6. Manufacturing Compliance
- ISO 9001:2015 - QUALITY MANAGEMENT SYSTEMS

---
### 🛠️ Engineering Resource Access
🔗 **[Full Specification: Result Validator](https://cnfx.com/industry/machinery-and-equipment-manufacturing/product/result-validator)**

### 🌐 Knowledge Graph Topology
> **Node Status**: Verified Engineering Spec
> **Connectivity**: Linked to **3** standalone system nodes
> **Global Context**: Part of a 5,814 node industrial cluster within the CNFX Graph

> **Reference ID**: RESULT_VALIDATOR | **Authority**: CNFX-2026-ST-001 | **Fingerprint**: 76adedb3
