---
title: "Separation Element/Cartridge"
industry: "Machinery and Equipment Manufacturing"
verification_protocol:
  urn: "URN:CNFX:ME:SEPARATION_ELEMENTCARTRIDGE"
  data_integrity_hash: "cd50bf9acf0629fdbbf8502fee4ac8b8"
  source_authority: "https://cnfx.com"
  strict_mode: true
source_identity:
  provider: "CNFX Industrial Knowledge Graph"
  index_version: "2026.Q1-Universal"
  authority_id: "URN:CNFX:ME:SEPARATION_ELEMENTCARTRIDGE"
  data_source_uri: "https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/separation-elementcartridge.md"
  official_resource_url: "https://cnfx.com/industry/machinery-and-equipment-manufacturing/product/separation-elementcartridge"
  is_verified_logic: true
attributes:
  spec:
    status: "config-dependent"
    typical_range: "0.5-25 bar differential pressure, -20°C to 120°C fluid temperature, 0.1-100 μm particle retention rating"
    unit: "mm"
engineering_limits:
  max_safe_operating_point:
    value: 35
    unit: "bar"
    consequence: "Hagen-Poiseuille law pressure differential exceeding media tensile strength (σ_max=15 MPa), Arrhenius equation thermal degradation at activation energy 80 kJ/mol, Darcy's law flow velocity exceeding 2 m/s causing media delamination"
fmea_matrix_quantitative:
  - node_1:
      trigger: "Particulate loading exceeding 5 g/L concentration causing pore occlusion"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Upstream pre-filtration with 100 μm mesh screen and differential pressure monitoring with 20 bar cutoff"
  - node_2:
      trigger: "Chemical incompatibility with pH&lt;2 or pH&gt;12 fluid causing polymer hydrolysis"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Material selection of PTFE or PVDF for full pH 0-14 compatibility and chemical resistance testing per ASTM D543"
bom_nodes:
  filter-media:
    type: "component"
    urn: "URN:CNFX:ME:FILTER_MEDIA"
    interface_type: "physical-logic-coupled"
  end-caps:
    type: "component"
    urn: "URN:CNFX:ME:END_CAPS"
    interface_type: "physical-logic-coupled"
  support-core:
    type: "component"
    urn: "URN:CNFX:ME:SUPPORT_CORE"
    interface_type: "physical-logic-coupled"
  gasketo-ring:
    type: "component"
    urn: "URN:CNFX:ME:GASKETO_RING"
    interface_type: "physical-logic-coupled"
manufacturing_compliance:
  - standard: "ISO 16889:2022 (HYDRAULIC FLUID POWER - FILTERS - MULTI-PASS METHOD FOR EVALUATING FILTRATION PERFORMANCE)"
    scope: "Verified Engineering Specification"
  - standard: "CE MARKING (EU DIRECTIVE 2006/42/EC FOR MACHINERY SAFETY)"
    scope: "Verified Engineering Specification"
url: "https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/separation-elementcartridge.md"
on_chain_sovereignty:
  contract_standard: "ERC-721-Industrial"
  metadata_hash: "925e6b472d3ca2ab6f54bebb5125cc7f51f288122e49ba8abbec51bdcb5c2e61"
  royalty_logic: "IPFS-CID-REQUIRED"
  mint_status: "logic-verified-ready"
version: "3.3.4-EXTREME-SOVEREIGN-WEB3"
---

# Industrial Specification: Separation Element/Cartridge

## 1. Technical Definition
A replaceable filtration or separation component within an in-line separation unit that physically separates contaminants, particles, or specific substances from a fluid stream.

## 2. Engineering Reasoning & Causal Matrix
> **Operational Intelligence**: Designed for **0.5-25 bar differential pressure, -20°C to 120°C fluid temperature, 0.1-100 μm particle retention rating**. Failure boundary: **35 bar differential pressure causes media rupture, 150°C causes polymer degradation, 0.01 μm particle breakthrough at 30 bar**, Mechanism: **Hagen-Poiseuille law pressure differential exceeding media tensile strength (σ_max=15 MPa), Arrhenius equation thermal degradation at activation energy 80 kJ/mol, Darcy's law flow velocity exceeding 2 m/s causing media delamination**.

### 2.1 Analytical Physics Model
Governed by the **Hansen Solubility Distance (HSP)**:

> **Primary Equation**: $R_a = \sqrt{4\Delta\delta_d^2 + \Delta\delta_p^2 + \Delta\delta_h^2}$  
> **Engineering Impact**: Predicts seal/gasket swelling when exposed to CIP chemicals.

| Symbol | Variable Definition | Localized Reference |
| :--- | :--- | :--- |
| \delta_d | Dispersive | Engineering Constant |
| \delta_p | Polar | Engineering Constant |
| \delta_h | Hydrogen | Engineering Constant |

### 2.2 FMEA (Failure Mode & Effects Analysis)
| Event Trigger | Severity | Failure Mode | Mitigation Strategy |
| :--- | :--- | :--- | :--- |
| Particulate loading exceeding 5 g/L concentration causing pore occlusion | 8 | Pressure differential increase to 30 bar within 15 minutes | Upstream pre-filtration with 100 μm mesh screen and differential pressure monitoring with 20 bar cutoff |
| Chemical incompatibility with pH&lt;2 or pH&gt;12 fluid causing polymer hydrolysis | 8 | Media swelling by 15% volume leading to housing deformation | Material selection of PTFE or PVDF for full pH 0-14 compatibility and chemical resistance testing per ASTM D543 |

## 3. Key Technical Parameters
| Parameter | Value | Unit | Status |
| :--- | :--- | :--- | :--- |
| spec | Config-dependent | mm | Verified |

## 4. System BOM & Knowledge Routing
### Core Components (Recursive Links)

### Industrial DNA Context (De-duplicated)
**Complementary Dependencies**: **Fluid Pumping System**, **Pressure Monitoring and Control System**, **Contaminant Collection and Disposal System**  
**Downstream Applications**: Purified Industrial Process Fluids, Contaminant-Free Lubricants, Clean Hydraulic Fluids  

## 5. Engineering Risks & FAQ
- **Caution**: 
- **Caution**: 
- **Caution**: 

### Q: What materials are used in separation cartridges for machinery manufacturing?
**A**: Separation cartridges are typically constructed from polypropylene, cellulose, glass fiber, activated carbon, stainless steel mesh, or PTFE membrane, depending on the specific filtration requirements and fluid compatibility.

### Q: How often should separation elements be replaced in industrial equipment?
**A**: Replacement frequency depends on operating conditions, contaminant load, and fluid type. Monitor pressure differentials and follow manufacturer recommendations, typically ranging from weeks to several months of continuous operation.

### Q: What components make up a standard separation cartridge assembly?
**A**: A standard separation cartridge consists of filter media, end caps, a support core, and gasket/O-ring seals to ensure proper sealing and structural integrity within the separation unit.

## 6. Manufacturing Compliance
- ISO 16889:2022 (HYDRAULIC FLUID POWER - FILTERS - MULTI-PASS METHOD FOR EVALUATING FILTRATION PERFORMANCE)
- CE MARKING (EU DIRECTIVE 2006/42/EC FOR MACHINERY SAFETY)

---
### 🛠️ Engineering Resource Access
🔗 **[Full Specification: Separation Element/Cartridge](https://cnfx.com/industry/machinery-and-equipment-manufacturing/product/separation-elementcartridge)**

### 🌐 Knowledge Graph Topology
> **Node Status**: Verified Engineering Spec
> **Connectivity**: Linked to **4** standalone system nodes
> **Global Context**: Part of a 5,814 node industrial cluster within the CNFX Graph

> **Reference ID**: SEPARATION_ELEMENTCARTRIDGE | **Authority**: CNFX-2026-ST-001 | **Fingerprint**: e9b8db83
