---
title: "Storage Frame"
industry: "Machinery and Equipment Manufacturing"
verification_protocol:
  urn: "URN:CNFX:ME:STORAGE_FRAME"
  data_integrity_hash: "cb1590ff2eab49aa29a34c61e555b6ed"
  source_authority: "https://cnfx.com"
  strict_mode: true
source_identity:
  provider: "CNFX Industrial Knowledge Graph"
  index_version: "2026.Q1-Universal"
  authority_id: "URN:CNFX:ME:STORAGE_FRAME"
  data_source_uri: "https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/storage-frame.md"
  official_resource_url: "https://cnfx.com/industry/machinery-and-equipment-manufacturing/product/storage-frame"
  is_verified_logic: true
attributes:
  spec:
    status: "config-dependent"
    typical_range: "Load capacity: 15-75 kN per pipe slot, Vibration tolerance: 0-2.5 mm displacement at 5-25 Hz"
    unit: "mm"
engineering_limits:
  max_safe_operating_point:
    value: 85
    unit: "kN"
    consequence: "Buckling instability in vertical frames (Euler critical load) or fatigue cracking in horizontal frames from cyclic bending stress (S-N curve at 10^6 cycles, stress amplitude &gt; 150 MPa)"
fmea_matrix_quantitative:
  - node_1:
      trigger: "Corrosion pitting depth exceeding 1.2 mm in structural welds"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Hot-dip galvanizing (85 μm zinc coating) with cathodic protection and ultrasonic weld inspection every 500 operating hours"
  - node_2:
      trigger: "Resonant vibration at 22-28 Hz matching frame natural frequency"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Tuned mass dampers (15% of frame mass) with viscoelastic damping layers and operational frequency locking below 20 Hz"
bom_nodes:
  vertical-support-columns:
    type: "component"
    urn: "URN:CNFX:ME:VERTICAL_SUPPORT_COLUMNS"
    interface_type: "physical-logic-coupled"
  horizontal-beams:
    type: "component"
    urn: "URN:CNFX:ME:HORIZONTAL_BEAMS"
    interface_type: "physical-logic-coupled"
  pipe-cradlesslots:
    type: "component"
    urn: "URN:CNFX:ME:PIPE_CRADLESSLOTS"
    interface_type: "physical-logic-coupled"
  mounting-brackets:
    type: "component"
    urn: "URN:CNFX:ME:MOUNTING_BRACKETS"
    interface_type: "physical-logic-coupled"
  retention-pinsclamps:
    type: "component"
    urn: "URN:CNFX:ME:RETENTION_PINSCLAMPS"
    interface_type: "physical-logic-coupled"
manufacturing_compliance:
  - standard: "ISO 9001:2015 QUALITY MANAGEMENT SYSTEMS"
    scope: "Verified Engineering Specification"
  - standard: "ANSI MH28.1-2015 INDUSTRIAL AND COMMERCIAL STEEL STORAGE RACKS"
    scope: "Verified Engineering Specification"
  - standard: "EN 15635:2008 STEEL STATIC STORAGE SYSTEMS - APPLICATION AND MAINTENANCE OF STORAGE EQUIPMENT"
    scope: "Verified Engineering Specification"
url: "https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/storage-frame.md"
on_chain_sovereignty:
  contract_standard: "ERC-721-Industrial"
  metadata_hash: "82288fe54a59bf3d224c6f281c380375a84ed8c48bbb8d6438331002eac21cfe"
  royalty_logic: "IPFS-CID-REQUIRED"
  mint_status: "logic-verified-ready"
version: "3.3.4-EXTREME-SOVEREIGN-WEB3"
---

# Industrial Specification: Storage Frame

## 1. Technical Definition
A structural component within a drill pipe magazine or rack designed to securely hold and organize multiple drill pipes in a vertical or horizontal orientation.

## 2. Engineering Reasoning & Causal Matrix
> **Operational Intelligence**: Designed for **Load capacity: 15-75 kN per pipe slot, Vibration tolerance: 0-2.5 mm displacement at 5-25 Hz**. Failure boundary: **Structural yield at 85 kN static load or 3.2 mm displacement under 30 Hz resonance**, Mechanism: **Buckling instability in vertical frames (Euler critical load) or fatigue cracking in horizontal frames from cyclic bending stress (S-N curve at 10^6 cycles, stress amplitude &gt; 150 MPa)**.

### 2.1 Analytical Physics Model
Governed by the **Frame Structural Deflection Analysis**:

> **Primary Equation**: $\delta = \frac{5 q L^4}{384 E I}$  
> **Engineering Impact**: Ensures structural stability for multi-stage machines.

| Symbol | Variable Definition | Localized Reference |
| :--- | :--- | :--- |
| q | Uniform Load | Engineering Constant |
| E | Elastic Modulus | Engineering Constant |
| I | Moment of Inertia | Engineering Constant |

### 2.2 FMEA (Failure Mode & Effects Analysis)
| Event Trigger | Severity | Failure Mode | Mitigation Strategy |
| :--- | :--- | :--- | :--- |
| Corrosion pitting depth exceeding 1.2 mm in structural welds | 8 | Crack propagation from stress concentration points leading to frame collapse | Hot-dip galvanizing (85 μm zinc coating) with cathodic protection and ultrasonic weld inspection every 500 operating hours |
| Resonant vibration at 22-28 Hz matching frame natural frequency | 8 | Accelerated fatigue failure at pipe retention clamps | Tuned mass dampers (15% of frame mass) with viscoelastic damping layers and operational frequency locking below 20 Hz |

## 3. Key Technical Parameters
| Parameter | Value | Unit | Status |
| :--- | :--- | :--- | :--- |
| spec | Config-dependent | mm | Verified |

## 4. System BOM & Knowledge Routing
### Core Components (Recursive Links)

### Industrial DNA Context (De-duplicated)
**Complementary Dependencies**: **Drill Pipe Handling Crane**, **Pipe Cleaning System**, **Automated Pipe Transfer System**  
**Downstream Applications**: Drill Pipe Magazine Assembly, Drill Pipe Rack Assembly, Drilling Rig Subsystem  

## 5. Engineering Risks & FAQ
- **Caution**: 
- **Caution**: 
- **Caution**: 

### Q: What materials are used in the storage frame construction?
**A**: Our storage frames are constructed from structural steel and high-strength alloy steel components, ensuring durability and reliable support for heavy drill pipes in industrial environments.

### Q: How does the storage frame organize drill pipes?
**A**: The frame uses a combination of horizontal beams, vertical support columns, and specialized pipe cradles or slots to securely hold drill pipes in either vertical or horizontal orientations, maximizing space efficiency and accessibility.

### Q: What safety features are included in the storage frame design?
**A**: Safety is ensured through retention pins or clamps that securely lock pipes in place, along with robust mounting brackets that provide stable attachment to floors or walls, preventing accidental movement or dislodging.

## 6. Manufacturing Compliance
- ISO 9001:2015 QUALITY MANAGEMENT SYSTEMS
- ANSI MH28.1-2015 INDUSTRIAL AND COMMERCIAL STEEL STORAGE RACKS
- EN 15635:2008 STEEL STATIC STORAGE SYSTEMS - APPLICATION AND MAINTENANCE OF STORAGE EQUIPMENT

---
### 🛠️ Engineering Resource Access
🔗 **[Full Specification: Storage Frame](https://cnfx.com/industry/machinery-and-equipment-manufacturing/product/storage-frame)**

### 🌐 Knowledge Graph Topology
> **Node Status**: Verified Engineering Spec
> **Connectivity**: Linked to **5** standalone system nodes
> **Global Context**: Part of a 5,814 node industrial cluster within the CNFX Graph

> **Reference ID**: STORAGE_FRAME | **Authority**: CNFX-2026-ST-001 | **Fingerprint**: 8466039e
