---
title: "Treatment Table"
industry: "Machinery and Equipment Manufacturing"
verification_protocol:
  urn: "URN:CNFX:ME:TREATMENT_TABLE"
  data_integrity_hash: "050b74128208fdb32826e66e7bba43a9"
  source_authority: "https://cnfx.com"
  strict_mode: true
source_identity:
  provider: "CNFX Industrial Knowledge Graph"
  index_version: "2026.Q1-Universal"
  authority_id: "URN:CNFX:ME:TREATMENT_TABLE"
  data_source_uri: "https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/treatment-table.md"
  official_resource_url: "https://cnfx.com/industry/machinery-and-equipment-manufacturing/product/treatment-table"
  is_verified_logic: true
attributes:
  spec:
    status: "config-dependent"
    typical_range: "0.1-2.0 mm positioning accuracy, 0-500 kg patient load capacity, 0-360° continuous rotation"
    unit: "mm"
engineering_limits:
  max_safe_operating_point:
    value: 2.0
    unit: "mm"
    consequence: "Ball screw backlash exceeding 0.05 mm, linear encoder resolution degradation below 0.01 mm, bearing fatigue at 10⁷ cycles under 500 kg load"
fmea_matrix_quantitative:
  - node_1:
      trigger: "Stepper motor microstepping resolution loss below 1.8°/200 steps"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Optical encoder feedback with 0.001 mm resolution and PID loop control at 1 kHz sampling"
  - node_2:
      trigger: "Linear guide rail lubrication failure at &lt;0.1 μm oil film thickness"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Forced lubrication system with 0.2 MPa pressure and 0.5 L/min flow rate monitoring"
bom_nodes:
  table-top:
    type: "component"
    urn: "URN:CNFX:ME:TABLE_TOP"
    interface_type: "physical-logic-coupled"
  base-frame:
    type: "component"
    urn: "URN:CNFX:ME:BASE_FRAME"
    interface_type: "physical-logic-coupled"
  positioning-motors:
    type: "part"
    urn: "URN:CNFX:ME:POSITIONING_MOTORS"
    interface_type: "physical-logic-coupled"
  control-panel:
    type: "device"
    urn: "URN:CNFX:ME:CONTROL_PANEL"
    interface_type: "physical-logic-coupled"
  positioning-sensors:
    type: "part"
    urn: "URN:CNFX:ME:POSITIONING_SENSORS"
    interface_type: "physical-logic-coupled"
manufacturing_compliance:
  - standard: "ISO 13485:2016 - MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS"
    scope: "Verified Engineering Specification"
  - standard: "ANSI/AAMI HE75:2009 - HUMAN FACTORS ENGINEERING - DESIGN OF MEDICAL DEVICES"
    scope: "Verified Engineering Specification"
  - standard: "CE MARKING - MEDICAL DEVICE REGULATION (MDR) 2017/745"
    scope: "Verified Engineering Specification"
url: "https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/treatment-table.md"
on_chain_sovereignty:
  contract_standard: "ERC-721-Industrial"
  metadata_hash: "48a6c0dc99aad27b3e752d1a379e9897e2a0f153efe2774377a7b005ce7fccca"
  royalty_logic: "IPFS-CID-REQUIRED"
  mint_status: "logic-verified-ready"
version: "3.3.4-EXTREME-SOVEREIGN-WEB3"
---

# Industrial Specification: Treatment Table

## 1. Technical Definition
A precision patient positioning platform within a radiation therapy simulator.

## 2. Engineering Reasoning & Causal Matrix
> **Operational Intelligence**: Designed for **0.1-2.0 mm positioning accuracy, 0-500 kg patient load capacity, 0-360° continuous rotation**. Failure boundary: **Positioning error exceeding ±2.0 mm, load exceeding 550 kg, rotational torque exceeding 45 N·m**, Mechanism: **Ball screw backlash exceeding 0.05 mm, linear encoder resolution degradation below 0.01 mm, bearing fatigue at 10⁷ cycles under 500 kg load**.

### 2.2 FMEA (Failure Mode & Effects Analysis)
| Event Trigger | Severity | Failure Mode | Mitigation Strategy |
| :--- | :--- | :--- | :--- |
| Stepper motor microstepping resolution loss below 1.8°/200 steps | 8 | Positional drift accumulation exceeding 0.5 mm over 100 cycles | Optical encoder feedback with 0.001 mm resolution and PID loop control at 1 kHz sampling |
| Linear guide rail lubrication failure at &lt;0.1 μm oil film thickness | 8 | Friction coefficient increase from 0.002 to 0.015 causing 15% velocity error | Forced lubrication system with 0.2 MPa pressure and 0.5 L/min flow rate monitoring |

## 3. Key Technical Parameters
| Parameter | Value | Unit | Status |
| :--- | :--- | :--- | :--- |
| spec | Config-dependent | mm | Verified |

## 4. System BOM & Knowledge Routing
### Core Components (Recursive Links)
- [Positioning Motors](https://cnfx.com/llms/industry/machinery-and-equipment-manufacturing/product/positioning-motors.md) `(Standalone System)`
- [Control Panel](https://cnfx.com/llms/industry/food-manufacturing/product/control-panel.md) `(Standalone System)`
- [Positioning Sensors](https://cnfx.com/llms/industry/rubber-and-plastic-product-manufacturing/product/positioning-sensors.md) `(Standalone System)`

### Industrial DNA Context (De-duplicated)
**Complementary Dependencies**: **Radiation Therapy Simulator**, **Patient Positioning Laser System**, **Medical Imaging System**  
**Downstream Applications**: Radiation Therapy Treatment Plans, Patient Positioning Protocols, Treatment Simulation Reports  

## 5. Engineering Risks & FAQ
- **Caution**: 
- **Caution**: 
- **Caution**: 

### Q: What materials are used in the construction of this treatment table?
**A**: This treatment table features a carbon fiber composite tabletop for optimal imaging compatibility, an aluminum alloy base frame for lightweight strength, and stainless steel components for durability and sterilization compliance in medical environments.

### Q: How does the positioning system ensure accurate patient alignment?
**A**: The table utilizes precision positioning motors and sensors integrated with the control panel to achieve sub-millimeter accuracy in patient positioning, essential for effective radiation therapy simulation and treatment planning.

### Q: What are the key components included in the treatment table system?
**A**: The complete system includes the base frame, control panel, positioning motors, positioning sensors, and table top, all engineered to work together for reliable and repeatable patient positioning in radiation therapy applications.

## 6. Manufacturing Compliance
- ISO 13485:2016 - MEDICAL DEVICES - QUALITY MANAGEMENT SYSTEMS
- ANSI/AAMI HE75:2009 - HUMAN FACTORS ENGINEERING - DESIGN OF MEDICAL DEVICES
- CE MARKING - MEDICAL DEVICE REGULATION (MDR) 2017/745

---
### 🛠️ Engineering Resource Access
🔗 **[Full Specification: Treatment Table](https://cnfx.com/industry/machinery-and-equipment-manufacturing/product/treatment-table)**

### 🌐 Knowledge Graph Topology
> **Node Status**: Verified Engineering Spec
> **Connectivity**: Linked to **5** standalone system nodes
> **Global Context**: Part of a 5,814 node industrial cluster within the CNFX Graph

> **Reference ID**: TREATMENT_TABLE | **Authority**: CNFX-2026-ST-001 | **Fingerprint**: 6c64af21
