---
title: "High-Purity Ferrochromium Nitride Alloy Powder"
industry: "Other Basic Metal Production"
verification_protocol:
  urn: "URN:CNFX:ME:HIGH_PURITY_FERROCHROMIUM_NITRIDE_ALLOY_POWDER"
  data_integrity_hash: "99294fe929084b5d23a3f52eaa2e541f"
  source_authority: "https://cnfx.com"
  strict_mode: true
source_identity:
  provider: "CNFX Industrial Knowledge Graph"
  index_version: "2026.Q1-Universal"
  authority_id: "URN:CNFX:ME:HIGH_PURITY_FERROCHROMIUM_NITRIDE_ALLOY_POWDER"
  data_source_uri: "https://cnfx.com/llms/industry/other-basic-metal-production/product/high-purity-ferrochromium-nitride-alloy-powder.md"
  official_resource_url: "https://cnfx.com/industry/other-basic-metal-production/product/high-purity-ferrochromium-nitride-alloy-powder"
  is_verified_logic: true
attributes:
  primary_spec:
    status: "config-dependent"
    typical_range: "0.1-15.0 MPa nitrogen pressure during nitriding, 1200-1450°C processing temperature"
    unit: "%"
  secondary_spec:
    status: "config-dependent"
    typical_range: "0.1-15.0 MPa nitrogen pressure during nitriding, 1200-1450°C processing temperature"
    unit: "μm"
engineering_limits:
  max_safe_operating_point:
    value: 8.5
    unit: "wt"
    consequence: "Excessive nitrogen interstitial saturation beyond chromium's 0.19 atomic radius ratio induces lattice distortion stress exceeding 2.1 GPa, triggering brittle fracture along {111} crystallographic planes"
fmea_matrix_quantitative:
  - node_1:
      trigger: "Incomplete chromium nitride (CrN) surface passivation layer formation below 0.3 μm thickness"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Controlled atmosphere annealing with argon-5% hydrogen at 650°C for 120 minutes to establish 0.8 μm Cr2O3-CrN composite barrier"
  - node_2:
      trigger: "Residual chloride contamination exceeding 150 ppm from precursor ferrochromium"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Electron beam remelting purification achieving &lt;15 ppm chloride with subsequent vacuum degassing at 10⁻³ Pa"
bom_nodes:
  ferrochromium-matrix:
    type: "component"
    urn: "URN:CNFX:ME:FERROCHROMIUM_MATRIX"
    interface_type: "physical-logic-coupled"
  chromium-nitride-precipitates:
    type: "component"
    urn: "URN:CNFX:ME:CHROMIUM_NITRIDE_PRECIPITATES"
    interface_type: "physical-logic-coupled"
  surface-passivation-layer:
    type: "component"
    urn: "URN:CNFX:ME:SURFACE_PASSIVATION_LAYER"
    interface_type: "physical-logic-coupled"
manufacturing_compliance:
  - standard: "ISO 9001:2015 - QUALITY MANAGEMENT SYSTEMS"
    scope: "Verified Engineering Specification"
  - standard: "CE MARKING - DIRECTIVE 2011/65/EU (ROHS) ON THE RESTRICTION OF HAZARDOUS SUBSTANCES IN ELECTRICAL AND ELECTRONIC EQUIPMENT"
    scope: "Verified Engineering Specification"
url: "https://cnfx.com/llms/industry/other-basic-metal-production/product/high-purity-ferrochromium-nitride-alloy-powder.md"
on_chain_sovereignty:
  contract_standard: "ERC-721-Industrial"
  metadata_hash: "ad2cd74297a5e196f20d09905778d3b8534cbff3f00a92ba0d9c55ff8c3c0665"
  royalty_logic: "IPFS-CID-REQUIRED"
  mint_status: "logic-verified-ready"
version: "3.3.4-EXTREME-SOVEREIGN-WEB3"
---

# Industrial Specification: High-Purity Ferrochromium Nitride Alloy Powder

## 1. Technical Definition
Nitrogen-strengthened ferrochromium alloy powder for specialized metallurgy

## 2. Engineering Reasoning & Causal Matrix
> **Operational Intelligence**: Designed for **0.1-15.0 MPa nitrogen pressure during nitriding, 1200-1450°C processing temperature**. Failure boundary: **Nitrogen content exceeding 8.5 wt% causes brittle intermetallic Cr2N precipitation, particle size below 5 μm initiates pyrophoric oxidation at 40°C**, Mechanism: **Excessive nitrogen interstitial saturation beyond chromium's 0.19 atomic radius ratio induces lattice distortion stress exceeding 2.1 GPa, triggering brittle fracture along {111} crystallographic planes**.

### 2.1 Analytical Physics Model
Governed by the **Hansen Solubility Distance (HSP)**:

> **Primary Equation**: $R_a = \sqrt{4\Delta\delta_d^2 + \Delta\delta_p^2 + \Delta\delta_h^2}$  
> **Engineering Impact**: Predicts seal/gasket swelling when exposed to CIP chemicals.

| Symbol | Variable Definition | Localized Reference |
| :--- | :--- | :--- |
| \delta_d | Dispersive | Engineering Constant |
| \delta_p | Polar | Engineering Constant |
| \delta_h | Hydrogen | Engineering Constant |

### 2.2 FMEA (Failure Mode & Effects Analysis)
| Event Trigger | Severity | Failure Mode | Mitigation Strategy |
| :--- | :--- | :--- | :--- |
| Incomplete chromium nitride (CrN) surface passivation layer formation below 0.3 μm thickness | 8 | Rapid atmospheric oxygen diffusion (1.2×10⁻⁸ cm²/s) causing exothermic oxidation at 280°C | Controlled atmosphere annealing with argon-5% hydrogen at 650°C for 120 minutes to establish 0.8 μm Cr2O3-CrN composite barrier |
| Residual chloride contamination exceeding 150 ppm from precursor ferrochromium | 8 | Chloride-induced stress corrosion cracking at grain boundaries under 85% relative humidity | Electron beam remelting purification achieving &lt;15 ppm chloride with subsequent vacuum degassing at 10⁻³ Pa |

## 3. Key Technical Parameters
| Parameter | Value | Unit | Status |
| :--- | :--- | :--- | :--- |
| primary_spec | Config-dependent | % | Verified |
| secondary_spec | Config-dependent | μm | Verified |

## 4. System BOM & Knowledge Routing
### Core Components (Recursive Links)

### Industrial DNA Context (De-duplicated)
**Complementary Dependencies**: **High-Purity Nitrogen Gas Supply System**, **Industrial Powder Sieving Machine**, **Controlled Atmosphere Furnace**  
**Downstream Applications**: High-Strength Stainless Steel Components, Wear-Resistant Tool Steel Parts, Specialized Aerospace Alloy Components  

## 5. Engineering Risks & FAQ
- **Caution**: 
- **Caution**: 
- **Caution**: 

### Q: What are the primary applications for high-purity ferrochromium nitride alloy powder?
**A**: This powder is used in specialized metallurgy for producing nitrogen-strengthened steels and alloys, particularly in applications requiring enhanced hardness, wear resistance, and corrosion resistance, such as tool steels, stainless steels, and high-performance automotive components.

### Q: How does nitrogen content affect the properties of ferrochromium nitride alloy powder?
**A**: Nitrogen forms chromium nitride precipitates within the ferrochromium matrix, significantly increasing hardness, strength, and wear resistance while maintaining good corrosion resistance. The controlled nitrogen content (typically specified as a percentage) allows precise tailoring of mechanical properties for specific metallurgical applications.

### Q: What advantages does the surface passivation layer provide in this alloy powder?
**A**: The surface passivation layer prevents oxidation during storage and handling, maintains powder purity, ensures consistent flow characteristics, and enhances safety by reducing pyrophoric risks. This layer is crucial for maintaining the specified low oxygen content (measured in ppm) throughout the powder's lifecycle.

## 6. Manufacturing Compliance
- ISO 9001:2015 - QUALITY MANAGEMENT SYSTEMS
- CE MARKING - DIRECTIVE 2011/65/EU (ROHS) ON THE RESTRICTION OF HAZARDOUS SUBSTANCES IN ELECTRICAL AND ELECTRONIC EQUIPMENT

---
### 🛠️ Engineering Resource Access
🔗 **[Full Specification: High-Purity Ferrochromium Nitride Alloy Powder](https://cnfx.com/industry/other-basic-metal-production/product/high-purity-ferrochromium-nitride-alloy-powder)**

### 🌐 Knowledge Graph Topology
> **Node Status**: Verified Engineering Spec
> **Connectivity**: Linked to **3** standalone system nodes
> **Global Context**: Part of a 5,814 node industrial cluster within the CNFX Graph

> **Reference ID**: HIGH_PURITY_FERROCHROMIUM_NITRIDE_ALLOY_POWDER | **Authority**: CNFX-2026-ST-001 | **Fingerprint**: b6beb805
