---
title: "Outrigger Boxes / Mounts"
industry: "Other Transport Equipment Manufacturing"
verification_protocol:
  urn: "URN:CNFX:ME:OUTRIGGER_BOXES_MOUNTS"
  data_integrity_hash: "be12174641fbfb8c73fee0e7e3c04d99"
  source_authority: "https://cnfx.com"
  strict_mode: true
source_identity:
  provider: "CNFX Industrial Knowledge Graph"
  index_version: "2026.Q1-Universal"
  authority_id: "URN:CNFX:ME:OUTRIGGER_BOXES_MOUNTS"
  data_source_uri: "https://cnfx.com/llms/industry/other-transport-equipment-manufacturing/product/outrigger-boxes-mounts.md"
  official_resource_url: "https://cnfx.com/industry/other-transport-equipment-manufacturing/product/outrigger-boxes-mounts"
  is_verified_logic: true
attributes:
  spec:
    status: "config-dependent"
    typical_range: "0-150 kN vertical load capacity, 0-30° deployment angle, -40°C to +85°C operating temperature"
    unit: "mm"
engineering_limits:
  max_safe_operating_point:
    value: 180
    unit: "kN"
    consequence: "Plastic deformation due to von Mises stress exceeding ASTM A36 steel yield strength (250 MPa), Euler buckling instability at critical slenderness ratio &gt;200, ductile-to-brittle transition in low-alloy steel below Charpy V-notch impact energy of 27 J at -40°C"
fmea_matrix_quantitative:
  - node_1:
      trigger: "Corrosion-induced material thinning exceeding 20% wall thickness reduction"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Hot-dip galvanizing to 85 μm zinc coating thickness with ASTM A123 compliance"
  - node_2:
      trigger: "Improper deployment angle exceeding 30° causing eccentric loading"
      severity: 8
      occurrence: 3
      detection: 4
      mitigation_protocol: "Integrated inclinometer with 0.1° resolution and electro-mechanical locking at 25° maximum"
bom_nodes:
  mounting-plate:
    type: "component"
    urn: "URN:CNFX:ME:MOUNTING_PLATE"
    interface_type: "physical-logic-coupled"
  reinforcement-gussets:
    type: "component"
    urn: "URN:CNFX:ME:REINFORCEMENT_GUSSETS"
    interface_type: "physical-logic-coupled"
  bushingbearing-housing:
    type: "component"
    urn: "URN:CNFX:ME:BUSHINGBEARING_HOUSING"
    interface_type: "physical-logic-coupled"
manufacturing_compliance:
  - standard: "ISO 9001:2015 - QUALITY MANAGEMENT SYSTEMS"
    scope: "Verified Engineering Specification"
  - standard: "ANSI/ASME B30.5-2021 - MOBILE AND LOCOMOTIVE CRANES"
    scope: "Verified Engineering Specification"
  - standard: "DIN EN 13000:2010 - CRANES - MOBILE CRANES"
    scope: "Verified Engineering Specification"
url: "https://cnfx.com/llms/industry/other-transport-equipment-manufacturing/product/outrigger-boxes-mounts.md"
on_chain_sovereignty:
  contract_standard: "ERC-721-Industrial"
  metadata_hash: "568fa41a2fd7bae2379aa3e1da97cb75018b9b4f620cc3fbd736d156056892b1"
  royalty_logic: "IPFS-CID-REQUIRED"
  mint_status: "logic-verified-ready"
version: "3.3.4-EXTREME-SOVEREIGN-WEB3"
---

# Industrial Specification: Outrigger Boxes / Mounts

## 1. Technical Definition
Structural mounting components that provide stability and support for carrier chassis during stationary operations.

## 2. Engineering Reasoning & Causal Matrix
> **Operational Intelligence**: Designed for **0-150 kN vertical load capacity, 0-30° deployment angle, -40°C to +85°C operating temperature**. Failure boundary: **Material yield strength exceeded at 180 kN vertical load, structural buckling at 35° deployment angle, material embrittlement below -45°C**, Mechanism: **Plastic deformation due to von Mises stress exceeding ASTM A36 steel yield strength (250 MPa), Euler buckling instability at critical slenderness ratio &gt;200, ductile-to-brittle transition in low-alloy steel below Charpy V-notch impact energy of 27 J at -40°C**.

### 2.1 Analytical Physics Model
Governed by the **Frame Structural Deflection Analysis**:

> **Primary Equation**: $\delta = \frac{5 q L^4}{384 E I}$  
> **Engineering Impact**: Ensures structural stability for multi-stage machines.

| Symbol | Variable Definition | Localized Reference |
| :--- | :--- | :--- |
| q | Uniform Load | Engineering Constant |
| E | Elastic Modulus | Engineering Constant |
| I | Moment of Inertia | Engineering Constant |

### 2.2 FMEA (Failure Mode & Effects Analysis)
| Event Trigger | Severity | Failure Mode | Mitigation Strategy |
| :--- | :--- | :--- | :--- |
| Corrosion-induced material thinning exceeding 20% wall thickness reduction | 8 | Structural collapse under operational loads | Hot-dip galvanizing to 85 μm zinc coating thickness with ASTM A123 compliance |
| Improper deployment angle exceeding 30° causing eccentric loading | 8 | Permanent deformation of mounting brackets | Integrated inclinometer with 0.1° resolution and electro-mechanical locking at 25° maximum |

## 3. Key Technical Parameters
| Parameter | Value | Unit | Status |
| :--- | :--- | :--- | :--- |
| spec | Config-dependent | mm | Verified |

## 4. System BOM & Knowledge Routing
### Core Components (Recursive Links)

### Industrial DNA Context (De-duplicated)
**Complementary Dependencies**: **Hydraulic Press**, **CNC Plasma Cutter**, **Welding Positioner**  
**Downstream Applications**: Truck-Mounted Cranes, Mobile Concrete Pumps, Utility Service Vehicles  

## 5. Engineering Risks & FAQ
- **Caution**: 
- **Caution**: 
- **Caution**: 

### Q: What materials are used in these outrigger boxes and mounts?
**A**: Our outrigger boxes and mounts are constructed from high-strength steel and alloy steel, ensuring maximum durability and load-bearing capacity for transport equipment applications.

### Q: How do outrigger boxes provide stability for carrier chassis?
**A**: Outrigger boxes and mounts create a stable foundation by distributing weight evenly during stationary operations, preventing chassis movement and ensuring safe, secure positioning for loading, maintenance, or stationary work.

### Q: What components are included in the outrigger box assembly?
**A**: Each outrigger box assembly includes a bushing/bearing housing for pivot movement, a mounting plate for secure attachment, and reinforcement gussets for added structural integrity and load distribution.

## 6. Manufacturing Compliance
- ISO 9001:2015 - QUALITY MANAGEMENT SYSTEMS
- ANSI/ASME B30.5-2021 - MOBILE AND LOCOMOTIVE CRANES
- DIN EN 13000:2010 - CRANES - MOBILE CRANES

---
### 🛠️ Engineering Resource Access
🔗 **[Full Specification: Outrigger Boxes / Mounts](https://cnfx.com/industry/other-transport-equipment-manufacturing/product/outrigger-boxes-mounts)**

### 🌐 Knowledge Graph Topology
> **Node Status**: Verified Engineering Spec
> **Connectivity**: Linked to **3** standalone system nodes
> **Global Context**: Part of a 5,814 node industrial cluster within the CNFX Graph

> **Reference ID**: OUTRIGGER_BOXES_MOUNTS | **Authority**: CNFX-2026-ST-001 | **Fingerprint**: 910bdb8e
