Chemical compounds used to remove oxygen from molten steel during forging ingot production.
Deoxidation products are specialized chemical agents introduced into molten steel to eliminate dissolved oxygen, preventing gas porosity and oxide inclusions that compromise mechanical properties in high-strength forging steel ingots. These materials react with oxygen to form stable oxides that either float to the surface as slag or remain as harmless dispersed particles.
Gebräuchliche Handelsnamen, technische Kennungen und Suchbegriffe für Deoxidation Products.
Diese Komponente wird in den folgenden Industrieprodukten eingesetzt.
Ursache → Fehlermodus → Engineering-Massnahme
Relevante Herstellerprofile aus der CNFX-Komponentenfähigkeitstabelle.
Die Herstellerliste dient der Vorrecherche und Einordnung von Fertigungskapazitäten. Sie ist keine Zertifizierung, kein Ranking und keine Transaktionsgarantie.
Keine Kundenbewertung und keine Echtzeitdaten. Die Werte zeigen typische Prüfkriterien in RFQ- und Lieferantenbewertungsprozessen.
Die Kriterien dienen als Orientierung für technische Einkaufsprüfungen. Konkrete Kunden, Länder, Bewertungsdaten oder Live-Nachfragen werden nur angezeigt, wenn entsprechende belastbare Daten vorliegen.
Aluminum, ferrosilicon, and calcium silicide are most common, with aluminum providing strong deoxidation but potentially creating hard alumina inclusions, while calcium modifies inclusions into softer forms.
Proper deoxidation reduces porosity and non-metallic inclusions, improving tensile strength, toughness, and fatigue resistance in forged components.
CNFX ist ein offenes Verzeichnis, keine Handelsplattform und kein Beschaffungsagent. Herstellerprofile und Formulare helfen bei der Vorbereitung des direkten Kontakts.
CNFX-Herstellerprofile, technische Klassifikation, öffentlich verfügbare Produktinformationen und fortlaufende Plausibilitätsprüfung.
Informationen zu Einsatzbereich, Spezifikationsgrenzen, Lieferantentypen und RFQ-Vorbereitung anfragen.
Herstellerprofile mit passender Bearbeitungs- oder Montagefähigkeit vergleichen.