Editorial Technical Reference

Vent Housing

This page explains how Vent Housing is classified within Machinery and Equipment Manufacturing. Technical values and manufacturer relationships are research references; confirm the current specification and supplier evidence for each order.

Technical Definition & Core Assembly

The protective enclosure that houses and supports the internal components of a safety vent system.

View Full Specifications Explore Manufacturing Sources
Representative product image. Confirm appearance and specifications with the manufacturer.

Product Specifications

Technical details and manufacturing context for Vent Housing

Definition
A vent housing is the structural component of a Safety Vent (CID) that provides a secure enclosure for internal mechanisms, protects against environmental factors, ensures proper airflow direction, and maintains system integrity during pressure relief operations. It is typically manufactured from stainless steel, aluminum alloy, or carbon steel, with material grade 316L specified for corrosion resistance in chemical service. The housing is designed to withstand burst pressures from 2.4 to 3.2 MPa (per ISO 4126), with an operating temperature range of -40 to 85°C. Wall thickness ranges from 3 to 6 mm, affecting pressure rating and weight, which varies from 5 to 20 kg depending on size and material. Flange sizes match piping systems from DN50 to DN200 (per EN 1092-1). The housing ensures a leakage rate of ≤0.01 mbar·L/s (per ISO 15848) and surface finish of Ra 0.8–1.6 μm (per ISO 1302) on sealing surfaces. It provides ingress protection rated IP54–IP65 (per IEC 60529) for dust and water resistance. The vent housing contains and directs the flow of gases or fluids during pressure release events, maintaining structural stability while allowing controlled venting through designated openings. It withstands pressure differentials and provides mounting points for other vent components. Selection requires verifying model-specific parameters such as operating pressure, burst pressure, temperature range, material grade, wall thickness, flange size, leakage rate, surface finish, weight, and ingress protection with the legal manufacturer or supplier. Always confirm that the housing meets the applicable standards for your specific application.
Working Principle
The vent housing contains and directs the flow of gases or fluids during pressure release events, maintaining structural stability while allowing controlled venting through designated openings. It withstands pressure differentials and provides mounting points for other vent components. The housing is designed to operate within specified pressure and temperature limits, ensuring that the safety vent functions correctly. It also protects internal components from environmental factors such as dust and moisture, as indicated by its ingress protection rating. The housing's material and construction must be compatible with the process media and operating conditions to prevent corrosion or mechanical failure.
Common Materials
Stainless Steel, Aluminum Alloy, Carbon Steel
Technical Parameters
ParameterTypical rangeNotes & selection driver
Burst Pressure2.4–3.2 MPaMinimum burst pressure for safetyISO 4126
Operating Temperature-40–85 °CSeal integrity outside this range
Material Grade316LCorrosion resistance for chemical serviceASTM A240
Wall Thickness3–6 mmAffects pressure rating and weight
Flange SizeDN50–DN200Matches piping systemEN 1092-1
Leakage Rate≤0.01 mbar·L/sHelium leak testISO 15848
Surface FinishRa 0.8–1.6 μmFor sealing surfacesISO 1302
Weight5–20 kgDepends on size and material
Ingress ProtectionIP54–IP65Dust and water resistanceIEC 60529

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Components / BOM
  • Housing Body
    The housing itself: encloses and locates the internal parts and provides the mounting interface.
  • Mounting Flange Part
    Provides attachment points for securing the housing to equipment
    Material: steel
  • Vent Opening Part
    Designed aperture for controlled release of pressure
    Material: same as housing
  • Internal Baffles Part
    Directs airflow and prevents backflow during venting operations
    Material: steel

Applied To / Applications

This component is essential for the following industrial systems and equipment:

Safety Vent (CID)
View system integration details

Industrial Ecosystem & Supply Chain Structure

Complementary Systems
Downstream Applications
Specialized Tooling

Application Fit & Sizing Matrix

Operational Limits
pressure: 0 to 10 bar (gauge)
other spec: Flow Rate: Up to 500 m³/h, Slurry Concentration: Max 30% solids by weight
temperature: -40°C to +120°C
Media Compatibility
✓ Natural Gas ✓ Compressed Air ✓ Industrial Process Water
Unsuitable: Hydrochloric Acid (HCl) environments
Sizing Data Required
  • Maximum Flow Rate (m³/h)
  • System Operating Pressure (bar)
  • Pipe Connection Diameter (mm)

Reliability & Engineering Risk Analysis

Failure Mode & Root Cause
Corrosion-induced perforation
Cause: Exposure to corrosive atmospheres (e.g., chemical fumes, salt spray) or condensation accumulation leading to pitting and eventual material loss, particularly at seams or weld joints.
Fatigue cracking at mounting points
Cause: Cyclic stresses from vibration (e.g., from attached equipment or airflow turbulence) or thermal expansion/contraction cycles, leading to crack initiation and propagation at bolt holes or support brackets.
Maintenance Indicators
  • Visible rust streaks, discoloration, or material flaking on the housing surface, especially near seams.
  • Audible rattling, buzzing, or increased vibration during operation, indicating loose internal baffles, damaged mounts, or structural compromise.
Engineering Tips
  • Apply a corrosion-resistant coating (e.g., zinc-rich primer or epoxy) and ensure proper drainage to prevent moisture accumulation; inspect and touch-up coating annually.
  • Install vibration-damping mounts or stiffeners at support points, and perform periodic torque checks on fasteners to maintain specified preload and reduce fatigue stress concentrations.

Indicative industry ranges for design and RFQ preparation. Confirm the exact figures and applicable standard with the manufacturer before specifying.

Compliance & Manufacturing Standards

Applicable Standards
ANSI/AMCA 500-L - Laboratory Methods for Testing Airflow Performance DIN 24163-1 - Ventilation and Air Conditioning - Ventilation Units - Part 1: General Requirements

Quoted from the published standard.

Manufacturing Precision
  • Bore Diameter: +/-0.05mm
  • Flatness: 0.15mm per 100mm length
Quality Inspection
  • Dimensional Verification with CMM (Coordinate Measuring Machine)
  • Leak Test with Pressure Differential Method

Manufacturers of Vent Housing

Manufacturer profiles associated with Vent Housing.

Sourcing Vent Housing from China?
Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.
Request manufacturers We manufacture this

Manufacturer listings support early research and capability understanding. They are not certification, ranking, or transaction guarantees.

Technical documentation
Request current drawings, revision history, and a signed specification sheet.
Manufacturing capability
Verify equipment lists, process limits, capacity, and representative production evidence.
Inspection readiness
Confirm test methods, calibrated equipment, sampling plans, and traceable reports.
Supplier transparency
Check the legal entity, factory address, ownership, certifications, and direct contacts.

CNFX does not score or rank suppliers. Buyers must verify all claims and documents with the legal manufacturer before ordering.

Supply Chain Compatible Machinery & Devices

Hydraulic Press

Industrial machine using hydraulic pressure to compress, form, or assemble materials

Explore Specs →
Heavy-Duty CNC Plasma Cutting Machine

The Heavy-Duty CNC Plasma Cutting Machine is a standalone industrial device designed for cutting conductive metals such as steel, stainless steel, aluminum, and copper alloys.

Explore Specs →
Automated Powder Coating System

Integrated industrial system for applying dry powder coatings to metal substrates.

Explore Specs →
Centrifugal Pump Impeller

The centrifugal pump impeller is a critical rotating component that converts mechanical energy from the motor into kinetic energy in fluid systems.

Explore Specs →

Frequently Asked Questions

What materials are available for vent housings?

Vent housings are available in stainless steel, aluminum alloy, and carbon steel. The material grade 316L is specified for corrosion resistance in chemical service. Confirm the appropriate material for your application with the manufacturer.

What is the operating pressure range for a vent housing?

However, the actual range depends on the specific model and application. Always verify with the legal manufacturer or supplier.

What standards apply to vent housings?

Relevant standards include for operating pressure, ISO 4126 for burst pressure, ASTM A240 for material grade, EN 1092-1 for flange size, ISO 15848 for leakage rate, ISO 1302 for surface finish, and IEC 60529 for ingress protection. These are reference standards; compliance must be confirmed with the manufacturer.

How do I select the right vent housing?

Selection requires verifying model-specific parameters such as operating pressure, burst pressure, temperature range, material grade, wall thickness, flange size, leakage rate, surface finish, weight, and ingress protection. Consult the manufacturer or supplier to ensure the housing meets your system requirements.
Data basis: editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records.

Preliminary Technical Classification
This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.
Buyer enquiry

Request manufacturing insight for Vent Housing

Ask for use case, specification boundaries, supplier type, and RFQ preparation information for this product.

Where it goes
Straight to the CNFX editorial desk, and to the manufacturer if this product is linked to a claimed profile. Nothing is broadcast to a supplier list.
Your details stay here
We do not sell or rent enquiry data, and we do not add you to a mailing list. Used only to answer this request.
No commission, no middleman
CNFX is a directory. We take no cut of any order and never negotiate on a supplier's behalf.
What we don't claim
A listing is not an endorsement. Qualify every supplier and verify every figure yourself before ordering.

Your business information is used only to process this request.

Thank you! Your message has been sent. We'll respond within 1–3 business days.
Sorry, we couldn't send your message. Please try again, or email us at contact@cnfx.com.

Need to Manufacture Vent Housing?

Compare manufacturer profiles with relevant product and process capability.

Create Manufacturer Profile Contact Us
Previous Product
Z-axis Ram/Spindle
Last Product
Get QuotesChat