Keyway and spline are mechanical components used to transmit torque between shafts and rotating elements like gears, pulleys, and couplings.
A keyway is a longitudinal slot machined into a shaft or hub to accommodate a key, which prevents relative rotation. A spline consists of multiple longitudinal ridges (teeth) on a shaft that mesh with grooves in a mating hub, allowing torque transmission while permitting axial movement. Both are critical for secure power transmission in mechanical systems.
Gebräuchliche Handelsnamen, technische Kennungen und Suchbegriffe für Keyway/Spline.
Diese Komponente wird in den folgenden Industrieprodukten eingesetzt.
Ursache → Fehlermodus → Engineering-Massnahme
Relevante Herstellerprofile aus der CNFX-Komponentenfähigkeitstabelle.
Die Herstellerliste dient der Vorrecherche und Einordnung von Fertigungskapazitäten. Sie ist keine Zertifizierung, kein Ranking und keine Transaktionsgarantie.
Keine Kundenbewertung und keine Echtzeitdaten. Die Werte zeigen typische Prüfkriterien in RFQ- und Lieferantenbewertungsprozessen.
Die Kriterien dienen als Orientierung für technische Einkaufsprüfungen. Konkrete Kunden, Länder, Bewertungsdaten oder Live-Nachfragen werden nur angezeigt, wenn entsprechende belastbare Daten vorliegen.
Keyways use a single key for torque transmission with fixed positioning, while splines use multiple interlocking teeth that allow axial movement and distribute loads across more surface area.
Use splines for higher torque capacity, applications requiring axial movement (sliding connections), or when precise angular positioning is needed. Keyways are simpler and cost-effective for fixed connections with moderate loads.
Common failures include wear, fretting corrosion, shear failure of keys, tooth deformation in splines, and improper fit leading to backlash or vibration.
CNFX ist ein offenes Verzeichnis, keine Handelsplattform und kein Beschaffungsagent. Herstellerprofile und Formulare helfen bei der Vorbereitung des direkten Kontakts.
CNFX-Herstellerprofile, technische Klassifikation, öffentlich verfügbare Produktinformationen und fortlaufende Plausibilitätsprüfung.
Informationen zu Einsatzbereich, Spezifikationsgrenzen, Lieferantentypen und RFQ-Vorbereitung anfragen.
Herstellerprofile mit passender Bearbeitungs- oder Montagefähigkeit vergleichen.