Structural grid supporting desiccant material in adsorption dryers
| Parameter | Typical range | Notes & selection driver |
|---|---|---|
| Mesh Size | 2-8 mm | |
| Open Area | 40-60% | |
| Thickness | 3-10 mm | |
| Load Capacity | 200-500 kg/m² | |
| Pressure Drop | < 0.1 bar at design flow |
Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.
This component is used in the following industrial products
A practical evidence checklist for RFQ preparation and supplier evaluation.
CNFX does not score or rank suppliers. Buyers must verify all claims and documents with the legal manufacturer before ordering.
Manufacturer profiles associated with Desiccant bed support grid.
Manufacturer listings support early research and capability understanding. They are not certification, ranking, or transaction guarantees.
To provide structural support for desiccant material while ensuring uniform airflow distribution and preventing desiccant particle carryover into downstream equipment.
Mesh size determines the balance between structural support and airflow resistance. Smaller mesh provides better desiccant retention but increases pressure drop, while larger mesh reduces pressure drop but may allow finer particles to pass through.
Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.