Interconnects: Voltage Rating Up to 50 V

Component Specifications

Definition

Interconnects in latch/flip-flop circuits are conductive pathways or connectors that facilitate electrical continuity between various circuit elements such as transistors, resistors, capacitors, and input/output terminals. They ensure reliable signal propagation, clock distribution, and power supply routing within sequential logic circuits, maintaining timing integrity and preventing signal degradation.

Working Principle

Interconnects operate by providing low-resistance conductive paths for electrical signals and power. In latch/flip-flop circuits, they transmit clock signals, data inputs, control signals, and power voltages between components. Their design minimizes parasitic capacitance and inductance to preserve signal integrity, prevent crosstalk, and ensure proper timing synchronization across the circuit.

Materials

Copper (Cu) with gold (Au) or tin (Sn) plating for corrosion resistance; dielectric materials like FR-4 for PCB traces; conductive adhesives or solder alloys (e.g., SAC305) for connections.

Technical Parameters

Parameter	Typical range	Notes & selection driver
Resistance	< 0.1 Ω per connection
Signal Speed	Up to 10 Gbps
Current Rating	Up to 5 A
Voltage Rating	Up to 50 V
Insulation Resistance	> 10^9 Ω
Operating Temperature	-40°C to +125°C

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

IEC 61188, IPC-A-610

Parent Products

This component is used in the following industrial products

Latch/Flip-Flop

A digital logic circuit that stores one bit of data, maintaining its state until changed by an input signal.

View Product Details

Engineering Analysis

Risks & Mitigation

Signal integrity loss
Electrical short circuits
Corrosion leading to connection failure
Thermal stress causing breakage

FMEA Triads

Trigger: Poor solder joint quality
Failure: Intermittent or lost connections
Mitigation: Implement automated optical inspection (AOI) and use high-reliability solder materials.

Trigger: Excessive parasitic capacitance
Failure: Signal delay and timing violations
Mitigation: Optimize trace geometry and use low-dielectric constant materials.

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance

±5% for electrical parameters; dimensional tolerances per IPC standards

Test Method

Continuity testing, impedance measurement, thermal cycling, and vibration testing according to IEC 60512.

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

CNFX does not score or rank suppliers. Buyers must verify all claims and documents with the legal manufacturer before ordering.

Manufacturers of Interconnects

Manufacturer profiles associated with Interconnects.

Sourcing Interconnects from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Manufacturer listings support early research and capability understanding. They are not certification, ranking, or transaction guarantees.

Compiled and source-reviewed by the CNFX editorial team. Each manufacturer above links to the page on that company's own website where the product is listed, with the date we checked it. How we source and review

Related Components

Serial Interface

Serial interface for industrial data transmission between IoT gateways and legacy equipment using RS-232/422/485 protocols.

Marking Ink

Specialized ink for permanent identification on surface mount resistors during manufacturing.

Dielectric Layer

Insulating layer in surface mount capacitors that stores electrical energy through polarization.

Optical Window

Transparent optical component for light transmission in polycarbonate lens housings

Frequently Asked Questions

What is the primary function of interconnects in a latch/flip-flop?

Interconnects provide electrical pathways to connect various components within the circuit, ensuring proper signal flow, clock distribution, and power supply for reliable operation.

How do interconnects affect circuit performance?

Poor interconnect design can lead to signal degradation, timing errors, and increased power consumption due to parasitic effects like capacitance and resistance.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Interconnects