TVS Diode Array: Clamping Voltage 9V to 58V, Response Time <1ns

Q: What is the difference between single TVS diodes and TVS diode arrays?

TVS diode arrays integrate multiple protection channels in one package, providing space-efficient protection for multi-line interfaces with matched characteristics across channels, while single diodes protect individual lines.

Q: How do TVS diode arrays protect against both positive and negative transients?

They use bidirectional TVS diodes that conduct in both directions when voltage exceeds the breakdown threshold in either polarity, providing symmetrical protection.

Component Specifications

Definition

A Transient Voltage Suppression (TVS) Diode Array is a multi-channel semiconductor device designed to protect sensitive electronic circuits from voltage transients, electrostatic discharge (ESD), and electrical fast transients (EFT) in industrial line protection applications. It provides bidirectional clamping across multiple signal lines with low capacitance and fast response time.

Working Principle

TVS diode arrays operate by avalanche breakdown or Zener breakdown mechanisms. When voltage exceeds the breakdown threshold, the diodes conduct heavily, clamping the transient voltage to a safe level and diverting excess current away from protected circuits. The array configuration allows simultaneous protection of multiple lines with minimal signal distortion.

Materials

Silicon semiconductor with passivation layer, lead frame (copper alloy), molding compound (epoxy resin), gold or copper bonding wires

Technical Parameters

Parameter	Typical range	Notes & selection driver
Channels	2 to 8 lines
Capacitance	3pF to 50pF per line
Response Time	<1ns
Clamping Voltage	9V to 58V
Breakdown Voltage	5V to 36V
Peak Pulse Current	1A to 10A
Operating Temperature	-55°C to 150°C

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

IEC 61000-4-2, IEC 61000-4-4, ISO 7637-2, AEC-Q101

Parent Products

This component is used in the following industrial products

Line Protection Circuitry

Electronic circuitry within a transceiver designed to protect signal lines from electrical faults such as overvoltage, overcurrent, and electrostatic discharge (ESD).

View Product Details

Engineering Analysis

Risks & Mitigation

Incorrect voltage rating selection
Thermal runaway under sustained overvoltage
Capacitance-induced signal degradation in high-speed circuits

FMEA Triads

Trigger: Excessive transient energy beyond device rating
Failure: Catastrophic short circuit or open circuit
Mitigation: Implement upstream fusing, select devices with appropriate energy ratings, use multi-stage protection

Trigger: Poor PCB layout creating inductance in protection path
Failure: Reduced protection effectiveness due to voltage overshoot
Mitigation: Minimize trace length between TVS array and protected IC, use ground planes, follow manufacturer layout guidelines

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance

±5% breakdown voltage tolerance, ±10% clamping voltage tolerance

Test Method

IEC 61000-4-2 (ESD: contact 4kV, air 8kV), IEC 61000-4-4 (EFT: 1kV), ISO 7637-2 (automotive transients)

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

Compare the published product scope and source details, then include your specifications and quantity in an enquiry.

Manufacturers of TVS Diode Array

Manufacturer profiles associated with TVS Diode Array.

Sourcing TVS Diode Array from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.

Compiled and source-reviewed by the CNFX editorial team. Each manufacturer above links to the page on that company's own website where the product is listed, with the date we checked it. How we source and review

Related Components

Terminal Base

A terminal base is an insulating support structure that holds and organizes electrical terminals in motor terminal blocks, providing secure connections and circuit management.

Contact Plate

A conductive plate in motor terminal blocks that establishes electrical contact between conductors.

Marking Strip

A durable marking strip used for terminal identification in motor terminal blocks to ensure proper electrical connections and safety compliance.

Gland Body

A gland body is the main housing component of an aluminum cable gland that provides mechanical protection and environmental sealing for electrical cables entering enclosures.

Frequently Asked Questions

What is the difference between single TVS diodes and TVS diode arrays?