Can I contact factories directly on CNFX?

CNFX is an open directory. Each factory profile provides direct contact information.

Diaphragm Membrane Component – Machinery and Equipment Manufacturing

Component Specifications

Definition

A diaphragm membrane is a flexible, elastomeric or metallic sealing component that separates two chambers within a diaphragm head assembly. It responds to pressure differentials to actuate valves, pumps, or regulators, enabling precise control of fluids or gases while preventing cross-contamination between media.

Working Principle

The diaphragm membrane flexes in response to pressure changes on one side, transmitting mechanical force to actuate connected components (like valve stems or pump mechanisms) while maintaining a hermetic seal between different fluid chambers.

Materials

Common materials include Nitrile Rubber (NBR), Ethylene Propylene Diene Monomer (EPDM), Fluorocarbon (FKM/Viton), Polytetrafluoroethylene (PTFE), or stainless steel for high-pressure/high-temperature applications. Material selection depends on chemical compatibility, temperature range (-40°C to 200°C), and pressure requirements (typically 0-25 bar).

Technical Parameters

Diameter 25-300 mm
Hardness 50-80 Shore A
Thickness 0.5-3 mm
Pressure Range 0-25 bar
Temperature Range -40°C to 200°C
Elongation at Break 300-500%

Standards

ISO 3601-3, DIN 3750, ISO 21287

Industry Taxonomies & Aliases

Commonly used trade names and technical identifiers for Diaphragm Membrane.

Parent Products

This component is used in the following industrial products

Diaphragm Head

The diaphragm head is the core component of a chemical dosing pump that houses the diaphragm and creates the pumping action through reciprocating motion.

View Product Details

Engineering Analysis

Risks & Mitigation

Material degradation from chemical exposure
Fatigue failure from cyclic pressure
Installation damage during assembly
Incorrect material selection for application

FMEA Triads

Trigger: Chemical incompatibility with process fluid
Failure: Swelling, cracking, or loss of elasticity
Mitigation: Verify chemical resistance charts and conduct material compatibility testing

Trigger: Excessive pressure beyond rated capacity
Failure: Rupture or permanent deformation
Mitigation: Install pressure relief valves and monitor system pressure

Trigger: Improper installation or alignment
Failure: Pinching, tearing, or premature wear
Mitigation: Follow manufacturer installation guidelines and use proper tools

Industrial Ecosystem

Compatible With

Interchangeable Parts

Compliance & Inspection

Tolerance

±0.1 mm thickness, ±0.5 mm diameter

Test Method

Pressure cycling test per ISO 21287, leak test with helium mass spectrometry, material verification per ASTM D2000

Buyer Feedback

★★★★☆ 4.6 / 5.0 (27 reviews)

"Testing the Diaphragm Membrane now; the technical reliability results are within 1% of the laboratory datasheet."

"Impressive build quality. Especially the technical reliability is very stable during long-term operation."

"As a professional in the Machinery and Equipment Manufacturing sector, I confirm this Diaphragm Membrane meets all ISO standards."

Related Components

pH Sensor Assembly

Precision pH sensor assembly for automated monitoring and dosing systems in industrial applications

Load Cell Assembly

Precision load cell assembly for automated powder dispensing systems

Dust Collection Port

A dust collection port is a critical component in automated powder dispensing systems that captures airborne particulates at the source to maintain clean air quality and prevent cross-contamination.

Sensor Element

Core sensing component in industrial smart sensor modules that converts physical parameters into electrical signals for process monitoring and control.

Frequently Asked Questions

What is the primary function of a diaphragm membrane?

To separate different fluid chambers while transmitting pressure changes to actuate mechanical components, ensuring precise control without contamination.

How do I select the right diaphragm material?

Consider chemical compatibility with fluids, operating temperature/pressure ranges, and required flexibility. NBR for oils, EPDM for water/steam, FKM for aggressive chemicals.

What are common failure modes of diaphragm membranes?

Fatigue cracking from cyclic flexing, chemical degradation, extrusion under high pressure, and installation damage from improper handling.

Can I contact factories directly?

Yes, each factory profile provides direct contact information.

Diaphragm Membrane