Distribution Hoses: Temperature Range -20°C to 80°C

Component Specifications

Definition

Distribution hoses are flexible, pressure-rated conduits designed to transport water from a central supply point to multiple spray nozzles or outlets within a water spray system. They ensure uniform fluid delivery, withstand operational pressures, and maintain consistent flow rates while accommodating system movement and vibration.

Working Principle

Operates by conveying pressurized water through a reinforced, flexible tube to distribute fluid evenly across spray points. The hose structure (typically inner tube, reinforcement layer, and outer cover) maintains integrity under pressure while allowing flexibility for routing and connection to nozzles.

Materials

Inner tube: EPDM or NBR rubber for water resistance; Reinforcement: High-tensile textile braid or steel wire helix; Outer cover: CR or CSM rubber for abrasion and environmental protection

Technical Parameters

Parameter	Typical range	Notes & selection driver
Length	Custom up to 50 m
Bend Radius	5x diameter
Inner Diameter	6-25 mm
Pressure Rating	10-25 bar
Temperature Range	-20°C to 80°C

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

ISO 1402, DIN EN 853

Parent Products

This component is used in the following industrial products

Water Spray System

A system that sprays water onto the road surface during compaction to prevent asphalt from sticking to the roller drum.

View Product Details

Engineering Analysis

Risks & Mitigation

Pressure surges causing burst failure
Abrasion from contact with machinery
Chemical degradation from contaminated water
Improper bending leading to flow restriction

FMEA Triads

Trigger: Exceeding pressure rating
Failure: Hose burst and fluid leakage
Mitigation: Install pressure relief valves and regular pressure testing

Trigger: Abrasion against sharp edges
Failure: Outer cover wear and reinforcement exposure
Mitigation: Use protective sleeves and proper routing clamps

Trigger: UV exposure or ozone cracking
Failure: Outer cover degradation and loss of flexibility
Mitigation: Use UV-resistant materials and indoor storage

Industrial Ecosystem

Compatible With

Water spray systems, misting systems, cooling systems

Typical Suppliers & Equivalents

Gates, Parker, Continental, Semperit

Compliance & Inspection

Tolerance

±5% on inner diameter, ±10% on pressure rating

Test Method

Hydrostatic pressure test per ISO 1402, burst test, and flexibility test

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

Compare the published product scope and source details, then include your specifications and quantity in an enquiry.

Manufacturers of Distribution Hoses

Manufacturer profiles associated with Distribution Hoses.

Sourcing Distribution Hoses from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.

Compiled and source-reviewed by the CNFX editorial team. Each manufacturer above links to the page on that company's own website where the product is listed, with the date we checked it. How we source and review

Related Components

Chrome Plating

Hard chrome plating is an electroplating process that deposits a layer of chromium onto metal surfaces to enhance wear resistance, corrosion protection, and reduce friction for hydraulic cylinder piston rods.

Upper Tool (Punch)

Upper Tool (Punch) is the active forming component in metal plate bending machines that applies precise downward force to create bends in sheet metal.

Main Frame

The main frame is the primary structural component of a hydraulic press, providing rigidity and stability to withstand high compressive forces during metal forming operations.

Shaft Bearing

Precision component supporting rotating shafts in vibration motors to reduce friction and maintain alignment.

Frequently Asked Questions

What is the typical lifespan of a distribution hose in continuous operation?

With proper maintenance and within specified pressure/temperature ranges, EPDM or NBR hoses typically last 3-5 years in continuous industrial use.

Can these hoses handle chemicals other than water?

Standard water spray hoses are designed for water only; for chemicals, material compatibility must be verified, and hoses with FKM or PTFE liners may be required.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Distribution Hoses