Door Plate: Temperature Range -40°C to 200°C, Thickness 3-25 mm

Component Specifications

Definition

A door plate is a flat or shaped structural component designed to seal and provide access to manholes, inspection ports, or service doors on industrial machinery and equipment. It serves as a removable barrier that maintains containment integrity while allowing maintenance, cleaning, or inspection access to internal compartments.

Working Principle

The door plate functions as a removable closure that seals against a mating flange or frame using gaskets or seals. It is secured with fasteners (bolts, latches, or clamps) to withstand internal pressure, vacuum, or environmental conditions while maintaining a leak-tight seal. When removed, it provides safe access to internal components.

Materials

Typically constructed from carbon steel (ASTM A36), stainless steel (304/316), aluminum alloys (6061-T6), or composite materials. Material selection depends on corrosion resistance, strength requirements, temperature exposure, and regulatory compliance.

Technical Parameters

Parameter	Typical range	Notes & selection driver
Seal Type	Gasket or O-ring groove
Thickness	3-25 mm
Surface Finish	Ra 3.2-12.5 μm
Pressure Rating	Up to 10 bar
Temperature Range	-40°C to 200°C
Flatness Tolerance	≤0.5 mm/m

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

ASME B16.5, DIN 2501

Parent Products

This component is used in the following industrial products

Manhole/Door

A manhole or door is a removable or hinged access panel installed on a soaking drum to allow for inspection, cleaning, maintenance, and loading/unloading of materials.

View Product Details

Engineering Analysis

Risks & Mitigation

Seal failure leading to leaks
Improper installation causing pressure release
Corrosion compromising structural integrity
Incorrect material selection for chemical exposure

FMEA Triads

Trigger: Gasket degradation or improper installation
Failure: Loss of containment seal
Mitigation: Regular gasket replacement, proper torque procedures, visual inspection protocols

Trigger: Corrosion due to chemical exposure
Failure: Structural weakening and potential rupture
Mitigation: Material compatibility analysis, protective coatings, corrosion monitoring

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance

Flatness within 0.5 mm per meter, dimensional tolerance ±0.8 mm

Test Method

Pressure testing per ASME BPVC Section VIII, leak testing with soap solution or helium mass spectrometry

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

CNFX does not score or rank suppliers. Buyers must verify all claims and documents with the legal manufacturer before ordering.

Manufacturers of Door Plate

Manufacturer profiles associated with Door Plate.

Sourcing Door Plate from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Manufacturer listings support early research and capability understanding. They are not certification, ranking, or transaction guarantees.

Compiled and source-reviewed by the CNFX editorial team. Each manufacturer above links to the page on that company's own website where the product is listed, with the date we checked it. How we source and review

Related Components

Mounting Interface

Precision mounting interface connecting punch tips to pharmaceutical tablet press machines for accurate tablet production.

Chrome Plating

Hard chrome plating is an electroplating process that deposits a layer of chromium onto metal surfaces to enhance wear resistance, corrosion protection, and reduce friction for hydraulic cylinder piston rods.

Upper Tool (Punch)

Upper Tool (Punch) is the active forming component in metal plate bending machines that applies precise downward force to create bends in sheet metal.

Main Frame

The main frame is the primary structural component of a hydraulic press, providing rigidity and stability to withstand high compressive forces during metal forming operations.

Frequently Asked Questions

What are the main safety considerations for door plate installation?

Proper gasket selection, correct torque on fasteners, regular inspection for corrosion or deformation, and compliance with pressure vessel regulations are critical for safe operation.

How often should door plates be inspected?

Inspect during routine maintenance cycles (typically every 6-12 months) or according to equipment manufacturer recommendations, checking for seal integrity, corrosion, and fastener condition.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Door Plate