Gate/Closure Plate: Temperature Range -20°C to 200°C

Component Specifications

Definition

A gate/closure plate is a flat or shaped metal plate that moves linearly or rotates within a discharge valve or gate assembly to open, close, or regulate the flow of bulk materials, powders, liquids, or gases in industrial processes. It creates a tight seal against the valve body to prevent leakage when closed and withstands pressure differentials, abrasion, and operational stresses.

Working Principle

The gate/closure plate operates by translational or rotational motion driven by an actuator (manual, pneumatic, hydraulic, or electric). When positioned across the flow path, it blocks material discharge; when retracted or rotated away, it allows flow. Precision alignment and sealing surfaces ensure leak-tight closure under system pressure.

Materials

Typically carbon steel (A36, 1045), stainless steel (304, 316), alloy steel, or abrasion-resistant steel (AR400/500). Coatings like hard chrome, tungsten carbide, or ceramic overlays may be applied for wear resistance. Gaskets or seals (rubber, PTFE) are used for sealing.

Technical Parameters

Parameter	Typical range	Notes & selection driver
Width	200-1000 mm
Height	300-1500 mm
Thickness	10-50 mm
Surface Finish	Ra 1.6-3.2 μm
Temperature Range	-20°C to 200°C
Flatness Tolerance	±0.1 mm/m
Operating Pressure	Up to 10 bar

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

ISO 5752, DIN 3352, ASME B16.34

Parent Products

This component is used in the following industrial products

Discharge Valve/Gate

A mechanical component that controls the release of solid materials from processing equipment.

View Product Details

Engineering Analysis

Risks & Mitigation

Wear and abrasion from particulate materials
Corrosion in harsh chemical environments
Misalignment causing leakage or jamming
Fatigue failure from cyclic loading
Seal degradation over time

FMEA Triads

Trigger: Abrasive material flow
Failure: Excessive wear on plate surface leading to leakage
Mitigation: Use hardened or coated materials; implement regular wear inspections

Trigger: Actuator malfunction
Failure: Plate stuck in open/closed position causing process disruption
Mitigation: Install backup actuators; conduct preventive maintenance on drive systems

Trigger: Thermal expansion mismatch
Failure: Binding or distortion under temperature changes
Mitigation: Design with thermal clearance; use materials with similar expansion coefficients

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance

Dimensional tolerances per ISO 2768-m, flatness within 0.1% of plate dimensions

Test Method

Pressure testing per ISO 5208, leak testing with helium or soap bubble method, wear testing per ASTM G65

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

Compare the published product scope and source details, then include your specifications and quantity in an enquiry.

Manufacturers of Gate/Closure Plate

Manufacturer profiles associated with Gate/Closure Plate.

Sourcing Gate/Closure Plate from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.

Compiled and source-reviewed by the CNFX editorial team. Each manufacturer above links to the page on that company's own website where the product is listed, with the date we checked it. How we source and review

Related Components

Upper Tool (Punch)

Upper Tool (Punch) is the active forming component in metal plate bending machines that applies precise downward force to create bends in sheet metal.

Main Frame

The main frame is the primary structural component of a hydraulic press, providing rigidity and stability to withstand high compressive forces during metal forming operations.

Shaft Bearing

Precision component supporting rotating shafts in vibration motors to reduce friction and maintain alignment.

Seal Groove

Precision-machined groove in aluminum bearing housings designed to accommodate sealing elements for fluid containment and contamination prevention.

Frequently Asked Questions

What is the primary function of a gate/closure plate?

To provide a reliable sealing surface that opens or closes the flow path in discharge valves, ensuring controlled material handling and preventing leaks.

How do you select the right material for a gate/closure plate?

Based on the application's abrasion, corrosion, pressure, and temperature requirements—e.g., stainless steel for corrosive environments, hardened steel for abrasive materials.

What maintenance is required for gate/closure plates?

Regular inspection for wear, alignment checks, lubrication of moving parts, and replacement of seals or coatings to maintain performance and prevent failure.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Gate/Closure Plate