Hinges or Slides: Load Capacity 200-5000 kg

Component Specifications

Definition

Hinges are rotating mechanical bearings that connect two solid objects, allowing a limited angle of rotation between them, typically used for swinging gates. Slides are linear motion components that facilitate smooth horizontal or vertical movement along a fixed path, commonly employed in sliding gate systems. Both components are engineered to withstand operational loads, environmental conditions, and repetitive motion cycles while maintaining alignment and minimizing friction.

Working Principle

Hinges operate on the principle of rotational motion around a fixed pivot point (pin), distributing loads through bearing surfaces to reduce wear. Slides function through linear motion mechanisms, often using ball bearings, rollers, or low-friction materials to facilitate movement along tracks or rails with minimal resistance.

Materials

Typically manufactured from carbon steel (ASTM A36), stainless steel (AISI 304/316), aluminum alloys (6061-T6), or engineered polymers (PTFE, nylon). Surface treatments include zinc plating, powder coating, or anodizing for corrosion resistance.

Technical Parameters

Parameter	Typical range	Notes & selection driver
Load Capacity	200-5000 kg
Travel Length	1-10 m (slides)
Rotation Angle	0-270° (hinges)
Corrosion Resistance	Salt spray test >500 hours
Operating Temperature	-40°C to 120°C

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

DIN 7998, ANSI/BHMA A156.9

Parent Products

This component is used in the following industrial products

Gate Assembly

A structural and functional assembly that forms the access point within a safety cage, designed to allow controlled entry/exit while maintaining protective integrity.

View Product Details

Engineering Analysis

Risks & Mitigation

Mechanical failure due to overload
Corrosion in harsh environments
Misalignment causing binding
Wear leading to increased friction
Improper installation compromising safety

FMEA Triads

Trigger: Excessive load beyond rated capacity
Failure: Structural deformation or fracture
Mitigation: Implement load monitoring systems and regular inspection protocols

Trigger: Corrosive environment without proper protection
Failure: Reduced mechanical strength and seizure
Mitigation: Use corrosion-resistant materials and protective coatings with scheduled maintenance

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance

±0.5 mm for dimensional accuracy, ±1° for angular alignment

Test Method

ASTM E8 for tensile strength, ISO 9227 for corrosion resistance, cyclic load testing per ANSI/BHMA standards

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

Compare the published product scope and source details, then include your specifications and quantity in an enquiry.

Manufacturers of Hinges or Slides

Manufacturer profiles associated with Hinges or Slides.

Sourcing Hinges or Slides from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.

Compiled and source-reviewed by the CNFX editorial team. Each manufacturer above links to the page on that company's own website where the product is listed, with the date we checked it. How we source and review

Related Components

Upper Tool (Punch)

Upper Tool (Punch) is the active forming component in metal plate bending machines that applies precise downward force to create bends in sheet metal.

Main Frame

The main frame is the primary structural component of a hydraulic press, providing rigidity and stability to withstand high compressive forces during metal forming operations.

Shaft Bearing

Precision component supporting rotating shafts in vibration motors to reduce friction and maintain alignment.

Seal Groove

Precision-machined groove in aluminum bearing housings designed to accommodate sealing elements for fluid containment and contamination prevention.

Frequently Asked Questions

What is the difference between hinges and slides in gate assemblies?

Hinges enable rotational movement for swinging gates, while slides facilitate linear motion for sliding gates. Hinges rotate around a fixed pivot, whereas slides move along a track or rail system.

How do I select the right hinge or slide for my gate assembly?

Consider load capacity, gate weight, movement type (rotational/linear), environmental conditions (corrosion, temperature), installation space, and required safety factors. Consult engineering specifications and compliance standards.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Hinges or Slides