Instrument Mounting Plate: Load Capacity ≥50 kg/m²

Component Specifications

Definition

A structural component designed to provide a stable, vibration-resistant mounting surface for measurement instruments, control devices, and indicators within industrial measurement and control panels. It ensures proper alignment, accessibility, and protection of sensitive equipment.

Working Principle

Provides a rigid, flat reference plane with precisely positioned mounting holes to secure instruments using fasteners. Distributes mechanical loads, isolates instruments from panel vibrations, and maintains dimensional stability under operational conditions.

Materials

Typically aluminum alloy (e.g., 6061-T6) for lightweight corrosion resistance, or cold-rolled steel (e.g., AISI 1018) for higher strength. Surface treatments include anodizing (aluminum) or powder coating/passivation (steel).

Technical Parameters

Parameter	Typical range	Notes & selection driver
Thickness	3-10 mm
Load Capacity	≥50 kg/m²
Surface Finish	Ra ≤ 3.2 μm
Flatness Tolerance	≤0.5 mm/m
Mounting Hole Pattern	Grid or custom layout

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

ISO 2768, DIN 7168

Parent Products

This component is used in the following industrial products

Measurement and Control Panel

A specialized interface panel within the Final Test Chamber that centralizes monitoring instruments and control devices for test parameters.

View Product Details

Engineering Analysis

Risks & Mitigation

Improper flatness causing instrument misalignment
Material fatigue under cyclic loads
Corrosion in harsh environments
Inadequate vibration isolation affecting measurement accuracy

FMEA Triads

Trigger: Insufficient material thickness or improper alloy selection
Failure: Plate deformation under load, leading to instrument misalignment
Mitigation: Use finite element analysis (FEA) to validate design, select materials with adequate yield strength, and specify flatness tolerances per ISO standards.

Trigger: Poor surface treatment or incompatible materials
Failure: Corrosion compromising structural integrity and instrument mounting stability
Mitigation: Apply appropriate coatings (anodizing, powder coating), use corrosion-resistant alloys, and follow environmental compatibility guidelines.

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance

Geometric tolerances per ISO 2768-m, flatness per DIN 876

Test Method

Coordinate measuring machine (CMM) verification, vibration testing per IEC 60068-2-6

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

Compare the published product scope and source details, then include your specifications and quantity in an enquiry.

Manufacturers of Instrument Mounting Plate

Manufacturer profiles associated with Instrument Mounting Plate.

Sourcing Instrument Mounting Plate from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.

Compiled and source-reviewed by the CNFX editorial team. Each manufacturer above links to the page on that company's own website where the product is listed, with the date we checked it. How we source and review

Related Components

Chrome Plating

Hard chrome plating is an electroplating process that deposits a layer of chromium onto metal surfaces to enhance wear resistance, corrosion protection, and reduce friction for hydraulic cylinder piston rods.

Upper Tool (Punch)

Upper Tool (Punch) is the active forming component in metal plate bending machines that applies precise downward force to create bends in sheet metal.

Main Frame

The main frame is the primary structural component of a hydraulic press, providing rigidity and stability to withstand high compressive forces during metal forming operations.

Shaft Bearing

Precision component supporting rotating shafts in vibration motors to reduce friction and maintain alignment.

Frequently Asked Questions

What are the key considerations when selecting an instrument mounting plate?

Material compatibility with the environment (corrosion resistance), flatness tolerance for instrument alignment, vibration damping properties, and mounting hole pattern flexibility for different instrument sizes.

Can mounting plates be customized for specific instruments?

Yes, plates are often custom-designed with precise hole patterns, cutouts for displays/cabling, and material specifications to match specific instrument footprints and panel layouts.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Instrument Mounting Plate