Label holders are precision-engineered components designed to securely mount identification labels on tool trays and organizers in industrial settings.
| Parameter | Typical range | Notes & selection driver |
|---|---|---|
| Color Options | Black, white, yellow, red, blue, green, orange, gray, clear color | Custom colors available on request; color affects UV stability and visibility. |
| Mounting Type | Snap-fit, adhesive, screw-mount, magnetic type | Snap-fit for tool trays with slots; adhesive for smooth surfaces; screw-mount for permanent installation; magnetic for ferrous surfaces. |
| Retention Force | 5–50 N | Force required to insert or remove label; higher values for high-vibration environments. |
| Temperature Range | -40 to 120 °C (plastic), -40 to 200 °C (metal) °C | Continuous operation; short-term peaks up to 150 °C for plastics, 250 °C for metals. |
| Chemical Resistance | Resistant to oils, solvents, mild acids, and alkalis rating | Tested per ISO 175; specific ratings depend on material grade.ISO 175 |
| Label Size Compatibility | Width: 10–100 mm; Height: 5–50 mm; Thickness: 0.1–1.0 mm | Custom sizes available; holder must accommodate label thickness without buckling. |
| Material | ABS, polycarbonate, nylon (PA66), anodized aluminum (6061-T6), stainless steel (304/316) grade | Plastics for chemical resistance; metals for high-temperature and mechanical strength.ASTM D4673, ASTM D3935, ASTM D4066, ASTM B221, ASTM A240 |
| Dimensions | Length: 20–200 mm; Width: 10–100 mm; Height: 5–50 mm | Overall holder dimensions; must fit tool tray profiles. |
| Tolerance | ±0.5 mm on critical dimensions mm | Ensures proper fit and label retention.ISO 2768-m |
| Service Life | 5–10 years under normal industrial use years | Depends on material, UV exposure, and chemical contact. |
| Temperature | -40 to 120 °C (plastic), -40 to 200 °C (metal) | Outside this window: Plastics become brittle below -40 °C and soften above 120 °C; metals may lose anodization or corrode above 200 °C. |
| Chemical exposure | Resistant to oils, solvents, mild acids, and alkalis | Outside this window: Prolonged exposure to strong acids/bases or aggressive solvents causes cracking, swelling, or degradation. |
| Vibration | Up to 5 g RMS | Outside this window: Excessive vibration can cause snap-fit failure or label displacement if retention force is insufficient. |
| UV exposure | Indoor or shaded outdoor use | Outside this window: Prolonged direct sunlight causes color fading and embrittlement in non-UV-stabilized plastics. |
Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.
This component is used in the following industrial products
A compartmentalized storage unit designed to hold and organize tools, fasteners, and small parts at assembly workstations.
A specialized rack within an assembly station that organizes and presents components for efficient access during interior assembly operations.
A storage and organization component within a torque tool station designed to hold and secure various torque tools.
A practical evidence checklist for RFQ preparation and supplier evaluation.
CNFX does not score or rank suppliers. Buyers must verify all claims and documents with the legal manufacturer before ordering.
Manufacturer profiles associated with Label Holders.
Manufacturer listings support early research and capability understanding. They are not certification, ranking, or transaction guarantees.
Label holders provide protection against environmental factors, ensure consistent label positioning, allow for easy label replacement without residue, and maintain professional appearance in industrial settings.
Consider environmental factors: plastics for chemical resistance and electrical insulation, metals for high-temperature applications and durability. Also consider compatibility with cleaning agents and expected mechanical stress.
Yes, with proper material selection (stainless steel or sealed plastic designs) and appropriate mounting methods, label holders can withstand washdown environments common in food processing and pharmaceutical manufacturing.
Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.