Nozzle / Connection: Temperature Range -50°C to 400°C

Component Specifications

Definition

A critical fluid transfer component integrated into machine shells that regulates the flow, direction, and pressure of liquids, gases, or granular materials. It serves as the interface between internal systems and external processes, ensuring precise material handling with minimal leakage or contamination.

Working Principle

Operates by creating a controlled passage through which fluids or materials flow under pressure differentials. The design (convergent/divergent geometry, orifice size) determines flow characteristics—laminar or turbulent—while sealing mechanisms prevent leaks. Connections may use threaded, flanged, or quick-disconnect systems to maintain integrity under operational stresses.

Materials

Stainless steel (AISI 316L for corrosion resistance), brass (C36000 for machinability), PTFE-coated aluminum (for chemical inertness), or engineered polymers (PEEK for high-temperature applications). Material selection depends on fluid compatibility, pressure ratings (up to 10, 000 psi), and temperature range (-50°C to 400°C).

Technical Parameters

Parameter	Typical range	Notes & selection driver
Surface Finish	Ra ≤ 0.8 μm for sanitary applications
Connection Type	NPT, BSP, SAE, or flanged
Pressure Rating	Up to 10,000 psi
Orifice Diameter	0.5 mm to 50 mm
Temperature Range	-50°C to 400°C
Flow Coefficient (Cv)	0.1 to 50

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

ISO 1179, DIN 11851, ASME B1.20.1

Parent Products

This component is used in the following industrial products

Shell

The outer pressure vessel of a heat exchanger that contains the tube bundle and directs the flow of the shell-side fluid.

View Product Details

Tube Sheets/Headers

Structural components in economizers that secure heat exchanger tubes and distribute/collect working fluids.

View Product Details

Engineering Analysis

Risks & Mitigation

Leakage leading to material loss or contamination
Corrosion from incompatible fluids
Thread stripping due to over-torquing
Clogging from particulate buildup

FMEA Triads

Trigger: Incorrect thread engagement or worn seals
Failure: Fluid leakage
Mitigation: Implement torque-controlled assembly and regular seal inspection/replacement schedules.

Trigger: Material fatigue from cyclic pressure loading
Failure: Crack formation and catastrophic rupture
Mitigation: Use fatigue-resistant materials (e.g., 316L stainless) and conduct periodic non-destructive testing (ultrasonic).

Trigger: Chemical incompatibility between fluid and nozzle material
Failure: Corrosion and contamination
Mitigation: Validate material-fluid compatibility charts and use protective coatings (e.g., PTFE).

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance

±0.05 mm on critical dimensions (orifice, thread pitch)

Test Method

Pressure testing per ISO 1179 (hydrostatic/pneumatic), leak detection via bubble immersion or mass spectrometry.

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

CNFX does not score or rank suppliers. Buyers must verify all claims and documents with the legal manufacturer before ordering.

Manufacturers of Nozzle / Connection

Manufacturer profiles associated with Nozzle / Connection.

Sourcing Nozzle / Connection from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Manufacturer listings support early research and capability understanding. They are not certification, ranking, or transaction guarantees.

Related Components

Chrome Plating

Hard chrome plating is an electroplating process that deposits a layer of chromium onto metal surfaces to enhance wear resistance, corrosion protection, and reduce friction for hydraulic cylinder piston rods.

Upper Tool (Punch)

Upper Tool (Punch) is the active forming component in metal plate bending machines that applies precise downward force to create bends in sheet metal.

Main Frame

The main frame is the primary structural component of a hydraulic press, providing rigidity and stability to withstand high compressive forces during metal forming operations.

Shaft Bearing

Precision component supporting rotating shafts in vibration motors to reduce friction and maintain alignment.

Frequently Asked Questions

What factors determine nozzle material selection?

Material choice depends on fluid chemical compatibility (e.g., stainless steel for corrosive fluids), pressure/temperature requirements, and regulatory standards (e.g., FDA compliance for food manufacturing).

How do I prevent leakage in high-pressure connections?

Use tapered threads (NPT) with thread sealant, ensure proper torque application, and select gaskets/O-rings rated for the operating pressure and temperature.

Are nozzles interchangeable between different machine brands?

Interchangeability depends on matching thread standards (e.g., ISO vs. NPT), pressure ratings, and dimensional tolerances. Always verify specifications before substitution.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Nozzle / Connection