Orientation Wipers/Blades: Width 10-50 mm, Length 50-300 mm

Component Specifications

Definition

Orientation wipers/blades are specialized components in orientation track systems that physically guide, align, or wipe products into correct positioning for downstream processes. They ensure consistent product orientation by applying controlled contact to adjust angular or lateral misalignment during high-speed conveyance.

Working Principle

Operates through mechanical contact with products on moving tracks; uses angled surfaces, flexible materials, or spring-loaded mechanisms to gently push, rotate, or stabilize items into predefined orientations without damaging surfaces.

Materials

Typically polyurethane, silicone rubber, or engineered plastics (e.g., UHMW-PE, acetal) for flexibility and wear resistance; metal cores (stainless steel or aluminum) for structural support; food-grade or chemical-resistant coatings as needed.

Technical Parameters

Parameter	Typical range	Notes & selection driver
Width	10-50 mm
Length	50-300 mm
Hardness	60-90 Shore A
Max Speed	200 products/min
Thickness	3-15 mm
Operating Temperature	-20°C to 80°C

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

DIN 8580

Parent Products

This component is used in the following industrial products

Orientation Track & Tooling

A precision guiding and positioning mechanism within a bowl feeder system that orients parts into the correct position for downstream processing.

View Product Details

Engineering Analysis

Risks & Mitigation

Wear leading to misalignment
Material degradation from chemicals
Improper installation causing product damage

FMEA Triads

Trigger: Material fatigue from continuous friction
Failure: Reduced alignment accuracy or product jams
Mitigation: Use wear-resistant materials and implement preventive replacement schedules

Trigger: Incorrect hardness selection
Failure: Product damage or insufficient guidance
Mitigation: Match material hardness to product sensitivity and speed requirements

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance

±0.5 mm positional accuracy, ±1° angular alignment

Test Method

Dimensional checks with calipers, alignment tests using sample products, wear analysis via cycle counting

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

CNFX does not score or rank suppliers. Buyers must verify all claims and documents with the legal manufacturer before ordering.

Manufacturers of Orientation Wipers/Blades

Manufacturer profiles associated with Orientation Wipers/Blades.

Sourcing Orientation Wipers/Blades from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Manufacturer listings support early research and capability understanding. They are not certification, ranking, or transaction guarantees.

Related Components

Upper Tool (Punch)

Upper Tool (Punch) is the active forming component in metal plate bending machines that applies precise downward force to create bends in sheet metal.

Main Frame

The main frame is the primary structural component of a hydraulic press, providing rigidity and stability to withstand high compressive forces during metal forming operations.

Shaft Bearing

Precision component supporting rotating shafts in vibration motors to reduce friction and maintain alignment.

Seal Groove

Precision-machined groove in aluminum bearing housings designed to accommodate sealing elements for fluid containment and contamination prevention.

Frequently Asked Questions

How do orientation wipers differ from standard wipers?

Orientation wipers are designed for precise product alignment with controlled flexibility and wear patterns, unlike general-purpose wipers used for cleaning or sealing.

What maintenance is required for orientation wipers?

Regular inspection for wear, tear, or contamination; replacement based on operational hours or product count; lubrication-free in most designs.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Orientation Wipers/Blades