PTFE sleeve: Temperature Range -200°C to +260°C

Component Specifications

Definition

A PTFE (Polytetrafluoroethylene) sleeve is a cylindrical component manufactured from PTFE polymer, designed to provide chemical resistance, thermal stability (operating range -200°C to +260°C), electrical insulation, and minimal friction in mechanical junctions. It serves as a protective barrier, seal, or bearing surface in various industrial equipment connections.

Working Principle

The PTFE sleeve operates by creating a chemically inert, non-stick, and low-friction interface between mating surfaces in a junction. Its molecular structure provides excellent dielectric properties and thermal resistance, preventing corrosion, reducing wear, and maintaining seal integrity under extreme conditions.

Materials

Virgin PTFE (Polytetrafluoroethylene) polymer, optionally filled with glass fiber, carbon, or bronze for enhanced mechanical properties. Density: 2.1-2.3 g/cm³, Melting Point: 327°C.

Technical Parameters

Parameter	Typical range	Notes & selection driver
Hardness	50-65 Shore D
Tensile Strength	20-35 MPa
Temperature Range	-200°C to +260°C
Chemical Resistance	Resistant to most chemicals and solvents
Dielectric Strength	>40 kV/mm
Coefficient Of Friction	0.04-0.10

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

ISO 12086, DIN 3754

Parent Products

This component is used in the following industrial products

Junction

The electrical connection point within a pH sensor where the reference electrode and measurement electrode meet.

View Product Details

Engineering Analysis

Risks & Mitigation

Cold flow under sustained load
Radiation degradation
Limited mechanical strength compared to metals

FMEA Triads

Trigger: Excessive mechanical load or temperature
Failure: Deformation or creep leading to seal failure
Mitigation: Use filled PTFE grades, proper sizing, and limit operational loads

Trigger: Chemical exposure beyond compatibility
Failure: Swelling or degradation
Mitigation: Verify chemical resistance charts and use alternative materials if needed

Trigger: Improper installation or misalignment
Failure: Premature wear or leakage
Mitigation: Follow installation guidelines and ensure proper alignment in junction

Industrial Ecosystem

Compatible With

Pumps, Valves, Pipe Fittings, Hydraulic Systems, Electrical Connectors

Typical Suppliers & Equivalents

DuPont Teflon, 3M Dyneon, Saint-Gobain, Garlock

Compliance & Inspection

Tolerance

±0.1 mm on diameter, ±0.2 mm on length (standard)

Test Method

ASTM D1710 for electrical properties, ASTM D638 for tensile strength, ISO 12086 for material specifications

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

Compare the published product scope and source details, then include your specifications and quantity in an enquiry.

Manufacturers of PTFE sleeve

Manufacturer profiles associated with PTFE sleeve.

Sourcing PTFE sleeve from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.

Compiled and source-reviewed by the CNFX editorial team. Each manufacturer above links to the page on that company's own website where the product is listed, with the date we checked it. How we source and review

Related Components

Chrome Plating

Hard chrome plating is an electroplating process that deposits a layer of chromium onto metal surfaces to enhance wear resistance, corrosion protection, and reduce friction for hydraulic cylinder piston rods.

Upper Tool (Punch)

Upper Tool (Punch) is the active forming component in metal plate bending machines that applies precise downward force to create bends in sheet metal.

Main Frame

The main frame is the primary structural component of a hydraulic press, providing rigidity and stability to withstand high compressive forces during metal forming operations.

Shaft Bearing

Precision component supporting rotating shafts in vibration motors to reduce friction and maintain alignment.

Frequently Asked Questions

What are the main advantages of using a PTFE sleeve in industrial junctions?

PTFE sleeves offer excellent chemical resistance, high-temperature stability, low friction, and electrical insulation, making them ideal for harsh environments and reducing maintenance needs.

Can PTFE sleeves be used in food processing equipment?

Yes, PTFE is FDA-compliant and suitable for food-grade applications due to its inertness and non-toxic properties.

How does temperature affect PTFE sleeve performance?

PTFE maintains properties from -200°C to +260°C, but may experience cold flow or creep under sustained load at high temperatures; filled PTFE variants can improve this.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

PTFE sleeve