Release Actuator: Stroke Length 5-25 mm, IP Rating IP65

Q: What maintenance does a release actuator require?

Regular inspection for wear, lubrication of moving parts per manufacturer guidelines, and periodic testing of electrical connections and seal integrity.

Q: Can release actuators be customized for specific applications?

Yes, parameters like stroke length, force, voltage, and mounting configurations can often be customized to match machine requirements.

Q: How do I troubleshoot a failing release actuator?

Check power supply, inspect for mechanical obstruction, test solenoid/motor function, and verify sensor feedback signals if equipped.

Component Specifications

Definition

The Release Actuator is a critical electromechanical or pneumatic component within trip latch systems, designed to convert control signals into precise mechanical motion to disengage latching mechanisms. It ensures reliable, repeatable release operations with minimal energy consumption and maintenance requirements, featuring robust construction for industrial environments.

Working Principle

Operates by receiving an electrical or pneumatic signal that energizes a solenoid, motor, or pneumatic piston, generating linear or rotational force to overcome latch spring tension and disengage the locking mechanism. Position sensors often provide feedback for closed-loop control.

Materials

Body: Aluminum alloy (e.g., 6061-T6) or stainless steel (304/316); Internal components: Steel alloys, brass, engineering plastics (POM, PTFE); Seals: Nitrile rubber or fluorocarbon elastomers.

Technical Parameters

Parameter	Typical range	Notes & selection driver
IP Rating	IP65
Cycle Life	>1,000,000 cycles
Response Time	<100 ms
Stroke Length	5-25 mm
Actuation Force	50-200 N
Operating Voltage	12-24 VDC or 100-240 VAC
Operating Temperature	-20°C to +80°C

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

ISO 13849-1, ISO 12100, DIN EN 60204-1, IEC 60947-5-1

Parent Products

This component is used in the following industrial products

Trip Latch

A mechanical safety component within a trip mechanism that engages or disengages to trigger protective actions.

View Product Details

Engineering Analysis

Risks & Mitigation

Mechanical failure leading to unintended release or failure to release
Electrical fault causing overheating or short circuits
Environmental contamination degrading performance
Misalignment causing excessive wear

FMEA Triads

Trigger: Worn solenoid coil or motor brushes
Failure: Insufficient force to disengage latch
Mitigation: Implement preventive replacement schedule and monitor current draw

Trigger: Seal degradation from chemical exposure
Failure: Contaminant ingress causing jamming
Mitigation: Use compatible seal materials and regular inspection

Trigger: Mounting bolt loosening from vibration
Failure: Actuator misalignment and binding
Mitigation: Apply thread-locking compounds and torque verification procedures

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance

Positional accuracy ±0.5 mm, force variation <10%

Test Method

Cyclic endurance testing per ISO 13849, dielectric strength testing, environmental sealing verification

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

Compare the published product scope and source details, then include your specifications and quantity in an enquiry.

Manufacturers of Release Actuator

Manufacturer profiles associated with Release Actuator.

Sourcing Release Actuator from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.

Compiled and source-reviewed by the CNFX editorial team. Each manufacturer above links to the page on that company's own website where the product is listed, with the date we checked it. How we source and review

Related Components

Chrome Plating

Hard chrome plating is an electroplating process that deposits a layer of chromium onto metal surfaces to enhance wear resistance, corrosion protection, and reduce friction for hydraulic cylinder piston rods.

Upper Tool (Punch)

Upper Tool (Punch) is the active forming component in metal plate bending machines that applies precise downward force to create bends in sheet metal.

Main Frame

The main frame is the primary structural component of a hydraulic press, providing rigidity and stability to withstand high compressive forces during metal forming operations.

Shaft Bearing

Precision component supporting rotating shafts in vibration motors to reduce friction and maintain alignment.

Frequently Asked Questions

What maintenance does a release actuator require?