Retaining Ring/Groove: Axial Load Capacity Up to 5000 N

Component Specifications

Definition

A retaining ring is a fastener that holds components onto a shaft or in a housing/bore when installed in a machined groove. The groove provides a precise recess for the ring to seat, creating an axial shoulder that prevents movement. This system allows for easy assembly and disassembly without threading or additional fasteners, commonly used in rod glands and end caps to secure seals, bearings, or other internal parts.

Working Principle

The retaining ring is compressed or expanded to fit into the groove, then springs back to its original shape, locking into place. The groove's dimensions ensure the ring sits flush, creating a positive stop against axial movement. In rod glands/end caps, this prevents components from shifting under pressure or vibration.

Materials

Typically made from carbon steel (e.g., SAE 1070-1095), stainless steel (e.g., AISI 302/304), or beryllium copper for corrosion resistance. Material selection depends on load, environment, and temperature.

Technical Parameters

Parameter	Typical range	Notes & selection driver
Groove Depth	0.3-2.0 mm
Groove Width	0.5-3.0 mm
Temperature Range	-40°C to 120°C
Axial Load Capacity	Up to 5000 N
Ring Diameter Range	5-100 mm

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

ISO 8750, DIN 471, DIN 472, ANSI B27.6

Parent Products

This component is used in the following industrial products

Rod Gland/End Cap

A sealing and structural component at the end of a hydraulic or pneumatic cylinder rod.

View Product Details

Engineering Analysis

Risks & Mitigation

Groove wear leading to ring dislodgement
Improper installation causing ring failure
Corrosion in harsh environments reducing strength

FMEA Triads

Trigger: Incorrect groove dimensions or surface finish
Failure: Ring slips out of groove, allowing component movement
Mitigation: Follow ISO/DIN standards for groove machining and inspect with gauges

Trigger: Overloading beyond axial capacity
Failure: Ring deforms or fractures, losing retention
Mitigation: Calculate loads accurately and select rings with appropriate specifications

Industrial Ecosystem

Compatible With

Hydraulic cylinders, pneumatic actuators, pump shafts, bearing assemblies

Typical Suppliers & Equivalents

Smalley, Rotor Clip, Truarc, Boker's

Compliance & Inspection

Tolerance

Groove depth tolerance ±0.05 mm, width tolerance ±0.1 mm per ISO 286

Test Method

Axial load testing per ISO 8748, salt spray testing per ASTM B117 for corrosion resistance

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

Compare the published product scope and source details, then include your specifications and quantity in an enquiry.

Manufacturers of Retaining Ring/Groove

Manufacturer profiles associated with Retaining Ring/Groove.

Sourcing Retaining Ring/Groove from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.

Compiled and source-reviewed by the CNFX editorial team. Each manufacturer above links to the page on that company's own website where the product is listed, with the date we checked it. How we source and review

Related Components

Upper Tool (Punch)

Upper Tool (Punch) is the active forming component in metal plate bending machines that applies precise downward force to create bends in sheet metal.

Main Frame

The main frame is the primary structural component of a hydraulic press, providing rigidity and stability to withstand high compressive forces during metal forming operations.

Shaft Bearing

Precision component supporting rotating shafts in vibration motors to reduce friction and maintain alignment.

Seal Groove

Precision-machined groove in aluminum bearing housings designed to accommodate sealing elements for fluid containment and contamination prevention.

Frequently Asked Questions

What is the purpose of a retaining ring groove in a rod gland?

The groove provides a precise location for the retaining ring to seat, creating an axial stop that secures seals or bearings within the gland, preventing leakage or component displacement under pressure.

Can retaining rings be reused?

It is generally not recommended to reuse retaining rings, as they may lose spring tension or become deformed, compromising their holding ability and risking failure.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Retaining Ring/Groove