Sealing / Enclosure: Temperature Range -40°C to +85°C

Component Specifications

Definition

A specialized sealing and enclosure system designed specifically for force sensors and load cells to provide environmental protection against dust, moisture, chemicals, and mechanical impacts. This component ensures the sensor's internal electronics and strain gauges remain isolated from external factors that could compromise measurement precision, signal integrity, or operational lifespan in industrial applications.

Working Principle

Creates a hermetic or high-integrity barrier around the force sensor using compression seals, gaskets, or welded joints that prevent ingress of contaminants while allowing force transmission through designed load paths. The enclosure maintains structural rigidity to prevent deflection that could affect calibration, with internal damping materials sometimes used to absorb vibration and shock loads.

Materials

Stainless steel (304/316), aluminum alloys (6061-T6), engineered plastics (PEEK, PTFE), nitrile rubber gaskets, silicone seals, epoxy potting compounds, anodized or powder-coated finishes for corrosion resistance.

Technical Parameters

Parameter	Typical range	Notes & selection driver
Weight	Varies by size (50g-5kg)
Mounting	Threaded, flange, or custom bracket
IP Rating	IP67/IP68/IP69K
Seal Type	O-ring, lip seal, or welded
Pressure Rating	Up to 10 bar
EMI/RFI Shielding	Optional conductive coatings
Temperature Range	-40°C to +85°C

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

ISO 376, DIN 51221, ISO 60529, DIN 40050-9

Parent Products

This component is used in the following industrial products

Force Sensor/Load Cell

A transducer that converts an applied mechanical force into an electrical signal for measurement and control purposes.

View Product Details

Engineering Analysis

Risks & Mitigation

Seal degradation over time
Thermal expansion mismatches
Galvanic corrosion in mixed materials
Over-compression damaging seals
Inadequate EMI shielding causing signal interference

FMEA Triads

Trigger: O-ring material incompatibility with cleaning chemicals
Failure: Seal degradation leading to moisture ingress
Mitigation: Use FDA-approved materials like EPDM or Viton, implement regular inspection schedules

Trigger: Thermal cycling causing differential expansion
Failure: Cracked welds or seal compression loss
Mitigation: Design with expansion joints, use materials with similar CTE, implement thermal stress analysis

Trigger: Vibration loosening fasteners
Failure: Enclosure separation and contamination ingress
Mitigation: Use thread-locking compounds, spring washers, regular torque checks in maintenance schedules

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance

±0.5% of full scale for force transmission, seal compression within 15-30% of cross-section

Test Method

IP testing per ISO 60529, pressure decay testing, helium leak testing for hermetic seals, thermal cycling from -40°C to +85°C

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

Compare the published product scope and source details, then include your specifications and quantity in an enquiry.

Manufacturers of Sealing / Enclosure

Manufacturer profiles associated with Sealing / Enclosure.

Sourcing Sealing / Enclosure from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.

Compiled and source-reviewed by the CNFX editorial team. Each manufacturer above links to the page on that company's own website where the product is listed, with the date we checked it. How we source and review

Related Components

Chrome Plating

Hard chrome plating is an electroplating process that deposits a layer of chromium onto metal surfaces to enhance wear resistance, corrosion protection, and reduce friction for hydraulic cylinder piston rods.

Upper Tool (Punch)

Upper Tool (Punch) is the active forming component in metal plate bending machines that applies precise downward force to create bends in sheet metal.

Main Frame

The main frame is the primary structural component of a hydraulic press, providing rigidity and stability to withstand high compressive forces during metal forming operations.

Shaft Bearing

Precision component supporting rotating shafts in vibration motors to reduce friction and maintain alignment.

Frequently Asked Questions

What IP rating is recommended for food manufacturing environments?

IP69K is recommended for food manufacturing as it provides protection against high-pressure, high-temperature washdowns with cleaning chemicals while preventing bacterial ingress.

How does the enclosure affect measurement accuracy?

Properly designed enclosures maintain accuracy through rigid construction that prevents deflection, while internal damping materials can actually improve accuracy by absorbing vibration. The key is ensuring force transmission paths remain uncompromised.

Can sealed enclosures be used in explosive atmospheres?

Yes, with ATEX or IECEx certification and proper flame-path design. Explosion-proof enclosures use specially engineered joints and seals that prevent ignition transmission.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Sealing / Enclosure