Support Rings: Wire Thickness 4-8 mm

Component Specifications

Definition

Support rings are circular or polygonal structural elements integrated into filter bag cages, typically positioned at intervals along the cage height. They provide radial support to filter bags, preventing bag deformation, collapse, or contact with adjacent bags during operation. These rings ensure consistent filtration surface area, optimize dust cake formation, and extend bag life by reducing mechanical stress.

Working Principle

Support rings work by providing rigid circumferential support to the filter bag fabric. During filtration cycles, differential pressure across the bag can cause inward collapse; the rings resist this force, maintaining an open flow path for dirty gas and preventing bag-to-bag contact. During cleaning cycles (pulse-jet or reverse air), they help the bag flex properly for effective dust dislodgement without excessive stress.

Materials

Typically carbon steel (ASTM A36), stainless steel (304/316L for corrosion resistance), or galvanized steel. Wire diameter: 4-8 mm. Surface treatments may include powder coating, epoxy coating, or hot-dip galvanizing for environmental protection.

Technical Parameters

Parameter	Typical range	Notes & selection driver
Shape	Circular, octagonal, or hexagonal
Spacing	300-600 mm between rings
Welding	Continuous weld or spot weld to cage verticals
Diameter	100-300 mm (matches bag/cage diameter)
Load Capacity	10-50 kg radial load (depends on material)
Wire Thickness	4-8 mm

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

ISO 2942, DIN 2458

Parent Products

This component is used in the following industrial products

Filter Bag Cage

A structural support frame that holds filter bags in place within a bag filter house, maintaining their shape and preventing collapse during operation.

View Product Details

Column Body

The main structural component of a column that provides support and houses internal mechanisms.

View Product Details

Engineering Analysis

Risks & Mitigation

Corrosion leading to structural failure
Improper spacing causing bag sagging
Welding defects creating weak points
Material incompatibility with process gases

FMEA Triads

Trigger: Corrosion from humid or acidic environments
Failure: Reduced ring diameter or breakage
Mitigation: Use corrosion-resistant materials (stainless steel), apply protective coatings, and implement regular inspection schedules.

Trigger: Excessive differential pressure during filtration
Failure: Ring deformation or detachment from cage verticals
Mitigation: Design rings with adequate wire thickness, ensure proper welding, and monitor system pressure limits.

Trigger: Improper installation or spacing
Failure: Bag collapse between rings or inadequate cleaning
Mitigation: Follow manufacturer spacing guidelines, verify alignment during installation, and use templates for consistent ring placement.

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance

Diameter tolerance ±2 mm, circularity within 3 mm TIR

Test Method

Visual inspection, dimensional verification, load testing per ISO 2942, and corrosion resistance testing (salt spray ASTM B117 if coated)

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

Compare the published product scope and source details, then include your specifications and quantity in an enquiry.

Manufacturers of Support Rings

Manufacturer profiles associated with Support Rings.

Sourcing Support Rings from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.

Compiled and source-reviewed by the CNFX editorial team. Each manufacturer above links to the page on that company's own website where the product is listed, with the date we checked it. How we source and review

Related Components

Chrome Plating

Hard chrome plating is an electroplating process that deposits a layer of chromium onto metal surfaces to enhance wear resistance, corrosion protection, and reduce friction for hydraulic cylinder piston rods.

Upper Tool (Punch)

Upper Tool (Punch) is the active forming component in metal plate bending machines that applies precise downward force to create bends in sheet metal.

Main Frame

The main frame is the primary structural component of a hydraulic press, providing rigidity and stability to withstand high compressive forces during metal forming operations.

Shaft Bearing

Precision component supporting rotating shafts in vibration motors to reduce friction and maintain alignment.

Frequently Asked Questions

What happens if support rings fail in a filter bag cage?

Failure can cause bag collapse, reduced filtration area, increased pressure drop, bag abrasion from contact, and premature bag replacement, leading to system inefficiency and downtime.

Can support rings be replaced separately from the cage?

Yes, if welded, they can be cut and rewelded, but replacement often requires partial cage disassembly. Some designs use removable rings for easier maintenance.

How do I select the right material for support rings?

Choose based on operating environment: carbon steel for dry, non-corrosive conditions; stainless steel for moisture, chemicals, or high temperatures; galvanized steel for moderate corrosion resistance.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Support Rings