Water Reservoir/Tank: Capacity 500-10000 liters

Component Specifications

Definition

A water reservoir or tank is a critical component in industrial water pump systems that serves as a storage vessel for water, maintaining system pressure stability, compensating for demand fluctuations, and providing emergency reserve capacity. These tanks are engineered to withstand operational pressures, prevent contamination, and optimize pump cycling efficiency through proper sizing and configuration.

Working Principle

The water reservoir/tank operates on hydraulic principles, storing water under pressure (in pressurized systems) or at atmospheric pressure (in open systems). It maintains system pressure through air compression in bladder tanks or via gravity feed in elevated tanks, reducing pump cycling frequency and preventing cavitation by ensuring adequate net positive suction head (NPSH).

Materials

Stainless steel (AISI 304/316), carbon steel with epoxy coating, fiberglass-reinforced plastic (FRP), polyethylene (HDPE), or concrete for large installations. Material selection depends on water quality, pressure requirements, and corrosion resistance needs.

Technical Parameters

Parameter	Typical range	Notes & selection driver
Capacity	500-10000 liters
Material Grade	Food-grade compliant where applicable
Connection Size	DN50-DN200
Temperature Range	0-60°C
Operating Pressure	2-10 bar

Ranges are indicative industry figures for RFQ preparation, not a supplier commitment. Confirm every value and standard with the legal manufacturer before ordering.

Standards

DIN 1988, ASME BPVC Section VIII

Parent Products

This component is used in the following industrial products

Water Pump System

A hydraulic system that supplies and circulates water for cooling and dust suppression in concrete cutting operations.

View Product Details

Engineering Analysis

Risks & Mitigation

Contamination from improper sealing
Corrosion due to material incompatibility
Pressure vessel failure if over-pressurized
Biological growth in stagnant water

FMEA Triads

Trigger: Corrosion due to aggressive water chemistry
Failure: Tank leakage and structural compromise
Mitigation: Use corrosion-resistant materials, implement cathodic protection, and conduct regular thickness testing

Trigger: Improper pressure relief valve maintenance
Failure: Catastrophic tank rupture
Mitigation: Install and regularly test pressure relief devices according to ASME standards

Industrial Ecosystem

Compatible With

Typical Suppliers & Equivalents

Compliance & Inspection

Tolerance

±2% of rated capacity, pressure rating ±5% of specified value

Test Method

Hydrostatic pressure testing at 1.5x operating pressure for 30 minutes, visual inspection, and leak detection

Procurement Evaluation Criteria

A practical evidence checklist for RFQ preparation and supplier evaluation.

Technical documentation

Request current drawings, revision history, and a signed specification sheet.

Manufacturing capability

Verify equipment lists, process limits, capacity, and representative production evidence.

Inspection readiness

Confirm test methods, calibrated equipment, sampling plans, and traceable reports.

Supplier transparency

Check the legal entity, factory address, ownership, certifications, and direct contacts.

Compare the published product scope and source details, then include your specifications and quantity in an enquiry.

Manufacturers of Water Reservoir/Tank

Manufacturer profiles associated with Water Reservoir/Tank.

Sourcing Water Reservoir/Tank from China?

Tell us your specification and target quantity — we will match it against manufacturer records and come back with the factories that fit.

Request manufacturers We manufacture this

Explore company information and manufacturing capabilities, then discuss the scope of your project with a relevant supplier.

Compiled and source-reviewed by the CNFX editorial team. Each manufacturer above links to the page on that company's own website where the product is listed, with the date we checked it. How we source and review

Related Components

Chrome Plating

Hard chrome plating is an electroplating process that deposits a layer of chromium onto metal surfaces to enhance wear resistance, corrosion protection, and reduce friction for hydraulic cylinder piston rods.

Upper Tool (Punch)

Upper Tool (Punch) is the active forming component in metal plate bending machines that applies precise downward force to create bends in sheet metal.

Main Frame

The main frame is the primary structural component of a hydraulic press, providing rigidity and stability to withstand high compressive forces during metal forming operations.

Shaft Bearing

Precision component supporting rotating shafts in vibration motors to reduce friction and maintain alignment.

Frequently Asked Questions

What is the purpose of a water reservoir in a pump system?

It provides water storage to balance supply and demand, reduces pump cycling to extend equipment life, maintains consistent system pressure, and serves as an emergency reserve during pump maintenance or power outages.

How do I determine the correct tank size for my application?

Tank sizing depends on system flow rate, pump capacity, demand patterns, and desired buffer time. Generally, tanks should hold 1-2 minutes of system flow at peak demand, with additional capacity for emergency reserves.

Data Basis

Editorial classification, named public sources where available, and source-reviewed manufacturer records. See the editorial policy.

Preliminary Technical Classification

This page supports structured research, RFQ preparation, and supplier evaluation. It does not replace buyer-led supplier qualification, standards review, or technical approval.

Water Reservoir/Tank